Search Results (9)

This article reports three new two-photon absorption (TPA) materials that are quinolinium-carbazole derivates. They are 3-(N-methyl-4-ethylquinolinium iodide)-9-ethylcarbazole (M4), 3-(N-methyl-4-ethylquinolinium iodide)-9-ethylcarbazole (H2), and 3-(N-methyl-4-ethylquinolinium iodide)-9-ethylcarbazole (H4). Their TPA cross-sections are 491, 515, and 512 GM, respectively. Under the excitation of near-infrared light, their fluorescence emission is about 650 nm. The compounds can stain nucleic acid DNA with the same level of nuclear localization as Hoechst 33342. Under continuous irradiation with a near-infrared laser, the three new compounds showed less fluorescence decay than DAPI, and the average fluorescence decay rates were 0.016%/s, 0.020%/s, and 0.023%/s. They are expected to become new two-photon fluorescent probes of nucleic acid DNA because of their excellent performance. Full article

One of the main issues that has limited the use of hydrogen as an energy vector for a long time is its low energy density per unit of volume. Alternative chemical storage methods have been developed in recent years to overcome the limitations associated with compressed or liquified hydrogen storage. One of these is the Liquid Organic Hydrogen Carrier (LOHC), which utilizes organic hydrocarbons that can capture hydrogen (through an exothermic hydrogenation reaction) and release hydrogen (through an endothermic dehydrogenation reaction). In this paper, a 0D model of an internal combustion engine fueled with a mixture of hydrogen and methane was used to investigate whether the enthalpy of the exhaust gases can balance the heat rate required to self-sustain the dehydrogenation stage. Two LOHC+ compounds were considered, namely, Perhydro-dibenzyltoluene and Perhydro-N-Ethylcarbazole. Four different hydrogen-to-methane ratios were considered, assuming an engine maximum brake power ranging from 500 to 6000 RPM. An energy balance was performed, balancing the dehydrogenation heat rate and the exhaust gas cooling heat rate, in order to establish the minimum temperatures of the exhaust gases required to self-sustain the LOHC+ dehydrogenation. We demonstrated that the minimum exhaust temperatures required to self-sustain the process in different running regimes and at different hydrogen-to-methane ratios are lower than literature and experimental exhaust temperatures. Full article

Carbon dots (CDots) are small carbon nanoparticles with effective surface passivation by organic functionalization. In the reported work, the surface functionalization of preexisting small carbon nanoparticles with N-ethylcarbazole (NEC) was achieved by the NEC radical addition. Due to the major difference in microwave absorption between the carbon nanoparticles and organic species such as NEC, the nanoparticles could be selectively heated via microwave irradiation to enable the hydrogen abstraction in NEC to generate NEC radicals, followed by in situ additions of the radicals to the nanoparticles. The resulting NEC-CDots were characterized by microscopy and spectroscopy techniques including quantitative proton and ¹³C NMR methods. The optical spectroscopic properties of the dot sample were found to be largely the same as those of CDots from other organic functionalization schemes. The high structural stability of NEC-CDots benefiting from the radical addition functionalization is highlighted and discussed. Full article

The effects of two different metal oxide catalysts, SnO and Li₂O, on the dehydrogenation temperature of Carbazole and N-Ethylcarbazole (NE), respectively, were investigated by the Thermogravimetric analyzer and Differential Scanning Calorimetry. Thermogravimetric experiments were performed with 10wt% SnO and Li₂O added to Carbazole and N-Ethylcarbazole, respectively, and compared to pure Carbazole and N-Ethylcarbazole. The results showed that the dehydrogenation temperature of N-Ethylcarbazole was lower than that of Carbazole, and the dehydrogenation temperature of N-Ethylcarbazole +SnO was the lowest, and SnO is an ideal dehydrogenation catalyst for N-Ethylcarbazole. Experiments using Differential Scanning Calorimetry and a Thermogravimetric analyzer showed that with the addition of catalyst, the activation energy of the mixture was more significant and stable, and the thermal hazard was reduced, whereas the relative dehydrogenation temperature was increased. This study provides important information for improving the design of dehydrogenation catalysts for organic liquid hydrogen storage processes. Full article

Hydrogen energy is considered to be a desired energy storage carrier because of its high-energy density, extensive sources, and is environmentally friendly. The development of hydrogen storage material, especially liquid organic hydrogen carrier (LOHC), has drawn intensive attention to address the problem of hydrogen utilization. Hydrogen carrier is a material that can reversibly absorb and release hydrogen using catalysts at elevated temperature, in which LOHC mainly relies on the covalent bonding of hydrogen during storage to facilitate long-distance transportation and treatment. In this review, the chemical properties and state-of-the-art of LOHCs were investigated and discussed. It reviews the latest research progress with regard to liquid organic hydrogen storage materials, namely N-ethylcarbazole, and the recent progress in the preparation of efficient catalysts for N-ethylcarbazole dehydrogenation by using metal multiphase catalysts supported by carbon–nitrogen materials is expounded. Several approaches have been considered to obtain efficient catalysts such as increasing the surface area of the support, optimizing particle size, and enhancing the porous structure of the support. This review provides a new direction for the research of hydrogen storage materials and considerations for follow-up research. Full article

Hydrogen storage in the form of liquid organic hydrides, especially N-ethylcarbazole, has been regarded as a promising technology for substituting traditional fossil fuels owing to its unique merits such as high volumetric, gravimetric hydrogen capacity and safe transportation. However, unsatisfactory dehydrogenation has impeded the widespread application of N-ethylcarbazole as ideal hydrogen storage materials in hydrogen energy. Therefore, designing catalysts with outstanding performance is of importance to address this problem. In the present work, for the first time, we have synthesized Pd nanoparticles immobilized on carbon nanotubes (Pd/CNTs) with different palladium loading through an alcohol reduction technique. A series of characterization technologies, such as X-ray diffraction (XRD), inductively coupled plasma-atomic emission spectrometer (ICP-AES), X-ray photoelectron spectroscopy (XPS) and transmission electron spectroscopy (TEM) were adopted to systematically explore the structure, composition, surface properties and morphology of the catalysts. The results reveal that the Pd NPs with a mean diameter of 2.6 ± 0.6 nm could be dispersed uniformly on the surface of CNTs. Furthermore, Pd/CNTs with different Pd contents were applied in the hydrogen release of dodecahydro-N-ethylcarbazole. Among all of the catalysts tested, 3.0 wt% Pd/CNTs exhibited excellent catalytic performance with the conversion of 99.6% producing 5.8 wt% hydrogen at 533 K, low activation energy of 43.8 ± 0.2 kJ/mol and a high recycling stability (>96.4% conversion at 5th reuse). Full article

Three carbazole-based conjugated polymers (poly(3,6-di(2-thienyl)carbazole) (PDTC), poly(2,7-bis(carbazol-9-yl)-9,9-spirobifluorene) (PS2CBP), and poly(3,6-bis(N-carbazole)-N-ethylcarbazole) (PCEC)) are synthesized using electrochemical polymerization. The spectroelectrochemical studies indicate that the PDTC, PS2CBP, and PCEC films show reversible electrochromic behaviors in their redox states, and the PS2CBP film shows a distinct color transition with four various colors (gray at 0 V, grayish-green at 1.0 V, moss green at 1.2 V, and foliage green at 1.4 V). The maximum optical contrast of the PS2CBP and PCEC films is 39.83% at 428 nm and 32.41% at 420 nm, respectively, in an ionic liquid solution. Dual-type electrochromic devices (ECDs) that employ PDTC, PS2CBP, or PCEC film as an anodic layer, and PProDOT-Et₂ film as a cathodic layer, were constructed. The as-prepared PCEC/PProDOT-Et₂ ECD shows high optical contrast (38.25% at 586 nm) and high coloration efficiency (369.85 cm² C⁻¹ at 586 nm), and the PS2CBP/PProDOT-Et₂ ECD shows high optical contrast (34.45% at 590 nm), good optical memory, and good long-term cycling stability. Full article

We report single crystal X-ray diffraction (hereafter, SCXRD) analyses of derivatives featuring the electron-donor N-ethylcarbazole or the (4-diphenylamino)phenyl moieties associated with a -CN group attached to a double bond. The compounds are (2Z)-3-(4-(diphenylamino)-phenyl)-2-(pyridin-3-yl)prop-2-enenitrile (I), (2Z)-3-(4-(diphenylamino)phenyl)-2-(pyridin-4-yl)-prop-2-enenitrile (II) and (2Z)-3-(9-ethyl-9H-carbazol-3-yl)-2-(pyridin-2-yl)enenitrile (III). SCXRD analyses reveal that I and III crystallize in the monoclinic space groups P2/c with Z’ = 2 and C2/c with Z’ = 1, respectively. Compound II crystallized in the orthorhombic space group Pbcn with Z’ = 1. The molecular packing analysis was conducted to examine the pyridine core effect, depending on the ortho, meta- and para-positions of the nitrogen atom, with respect to the optical properties and number of independent molecules (Z’). It is found that the double bond bearing a diphenylamino moiety introduced properties to exhibit a strong π-π-interaction in the solid state. The compounds were examined to evaluate the effects of solvent polarity, the role of the molecular structure, and the molecular interactions on their self-assembly behaviors. Compound I crystallized with a cell with two conformers, anti and syn, due to interaction with solvent. DFT calculations indicated the anti and syn structures of I are energetically stable (less than 1 eV). Also electrochemical and photophysical properties of the compounds were investigated, as well as the determination of optimization calculations in gas and different solvent (chloroform, cyclohexane, methanol, ethanol, tetrahydrofuran, dichloromethane and dimethyl sulfoxide) in the Gaussian09 program. The effect of solvent by PCM method was also investigated. The frontier HOMO and LUMO energies and gap energies are reported. Full article

Lithium, used in conjunction with sodium metal, produces a high yield of carbazole when reacted with phenothiazine-5-oxide or phenothiazine-5,5-dioxide. A high yield of 9-ethylcarbazole is also produced when these reagents react with 10-ethylphenothiazine, 10-ethylphenothiazine-5-oxide, and 10-ethylphenothiazine-5,5-dioxide. Degassed Raney nickel produces carbazole in high yield when reacted with phenothiazine and phenothiazine-5-oxide. A moderate yield of 9-ethylcarbazole is produced when n-butyllithium is reacted with 10-ethylphenothiazine-5-oxide. Full article