Search Results (34)

Integrating Joint Source–Channel Coding (JSCC) with the LoRa Chirp Spread Spectrum (CSS) physical layer (PHY) presents a significant challenge due to the complexity of joint optimization, which remains underexplored despite the known advantages of JSCC. Traditional LoRa systems rely on decoupled source and channel coding, resulting in redundant overhead and limited adaptability under dynamic Wireless Body Area Network (WBAN) conditions. To address these limitations, we propose a novel LoRa–JSCC framework: a fully learned, end-to-end differentiable architecture that jointly optimizes source compression and channel redundancy. The proposed system integrates a Denoising Autoencoder (DAE) for non-linear source compression with learned neural channel encoder and decoder modules, trained via backpropagation to minimize reconstruction distortion under noisy channel conditions. Rigorous Monte Carlo simulations conducted under unified and reproducible channel conditions demonstrate consistent performance improvements across LoRa configurations. The proposed approach achieves an average 25–30% improvement in goodput across moderate-to-high SNR regimes, with gains exceeding 100% under noise-limited conditions. It further reduces Time on Air (ToA) by approximately 30–35%, enhancing spectral efficiency and lowering effective energy cost per delivered bit. In the transitional Bit Error Rate (BER) region, the proposed LoRa–JSCC framework exhibits an effective SNR gain of approximately 18–20 dB relative to conventional LoRa, corresponding to multiple orders-of-magnitude reduction in BER. These results indicate substantial improvements in reliability, coverage robustness, and energy efficiency for WBAN and IoT deployments. Full article

Wireless Body Area Networks (WBANs) enable real-time data collection for medical monitoring, sports tracking, and environmental sensing, driven by Internet of Things advancements. Their layered architecture supports efficient sensing, aggregation, and analysis, but energy constraints from transmission (over 60% of consumption), idle listening, and dynamic conditions like body motion hinder adoption. Challenges include minimizing energy waste while ensuring data reliability, Quality of Service (QoS), and adaptation to channel variations, alongside algorithm complexity and privacy concerns. This paper reviews recent power control mechanisms in WBANs, encompassing feedback control, dynamic and convex optimization, graph theory-based path optimization, game theory, reinforcement learning, deep reinforcement learning, hybrid frameworks, and emerging architectures such as federated learning and cell-free massive MIMO, adopting a systematic review approach with a focus on healthcare and IoT application scenarios. Achieving energy savings ranging from 6% (simple feedback control) to 50% (hybrid frameworks with emerging architectures), depending on method complexity and application scenario, with prolonged network lifetime and improved reliability while preserving QoS requirements in healthcare and IoT applications. Full article

The increasing demand for real-time, energy-efficient, and interference-resilient communication in smart healthcare environments has intensified interest in Biomedical Internet of Things (Bio-IoT) systems. However, ensuring reliable wireless connectivity for wearable and implantable biomedical sensors remains a challenge due to mobility, latency sensitivity, power constraints, and multi-user interference. This paper addresses these issues by proposing a reconfigurable massive multiple-input multiple-output (MIMO) antenna architecture, incorporating hybrid analog–digital beamforming and adaptive signal processing. The methodology combines conventional algorithms—such as Least Mean Square (LMS), Zero-Forcing (ZF), and Minimum Variance Distortionless Response (MVDR)—with a novel mobility-aware beamforming scheme. System-level simulations under realistic channel models (Rayleigh, Rician, 3GPP UMa) evaluate signal-to-interference-plus-noise ratio (SINR), bit error rate (BER), energy efficiency, outage probability, and fairness index across varying user loads and mobility scenarios. Results show that the proposed hybrid beamforming system consistently outperforms benchmarks, achieving up to 35% higher throughput, a 65% reduction in packet drop rate, and sub-10 ms latency even under high-mobility conditions. Beam pattern analysis confirms robust nulling of interference and dynamic lobe steering. This architecture is well-suited for next-generation Bio-IoT deployments in smart hospitals, enabling secure, adaptive, and power-aware connectivity for critical healthcare monitoring applications. Full article

Wireless body area networks (WBANs) are a pivotal solution for continuous health monitoring, but their energy constraints pose a significant challenge for long-term operation. This paper provides a comprehensive review of state-of-the-art energy-efficient mechanisms, critically evaluating solutions across various network layers. We focus on three key approaches: energy-aware MAC protocols that reduce idle listening and optimize duty cycling; energy-efficient routing protocols that enhance data transmission and network longevity; and emerging energy harvesting techniques that offer a path toward energy-autonomous WBANs. Furthermore, the paper provides a detailed analysis of the inherent trade-offs between energy efficiency and other critical performance metrics, such as latency, reliability, and security. It also explores the transformative potential of emerging technologies, such as AI and blockchain, for dynamic energy management and secure data handling. By synthesizing these findings, this work contributes to the development of sustainable WBAN solutions and outlines clear directions for future research. Full article

The adoption of wireless medical technologies in hospital environments is often limited by cellular coverage issues, especially in indoor areas with complex structures. This study presents a detailed radio spectrum measurement campaign conducted at the Cova da Beira University Hospital Center (CHUCB), using the NARDA SRM-3006 and R&S^®TSME6 equipment. The signal strength and quality of 5G NR, LTE, UMTS, and NB-IoT technologies were evaluated. Critical coverage gaps were identified, particularly at points 17, 19, and 21. Results revealed that operators MEO and NOS dominate coverage, with MEO providing better 5G NR coverage and NOS excelling in LTE signal quality. Based on the results, the localized installation of femtocells is proposed to improve coverage in these areas. The approach was designed to be scalable and replicable, with a planned application at Cumura Hospital (Guinea-Bissau), reinforcing the applicability of the solution in contexts with limited infrastructure. This work provides both technical and clinical contributions to achieving ubiquitous cellular coverage in healthcare settings. Full article

Mental health is an important aspect of an individual’s overall well-being. Positive mental health is correlated with enhanced cognitive function, emotional regulation, and motivation, which, in turn, foster increased productivity and personal growth. Accurate and interpretable predictions of mental disorders are crucial for effective intervention. This study develops a hybrid deep learning model, integrating CNN and BiLSTM applied to EEG data, to address this need. To conduct a comprehensive analysis of mental disorders, we propose a two-tiered classification strategy. The first tier classifies the main disorder categories, while the second tier classifies the specific disorders within each main disorder category to provide detailed insights into classifying mental disorder. The methodology incorporates techniques to handle missing data (kNN imputation), class imbalance (SMOTE), and high dimensionality (PCA). To enhance clinical trust and understanding, the model’s predictions are explained using local interpretable model-agnostic explanations (LIME). Baseline methods and the proposed CNN–BiLSTM model were implemented and evaluated at both classification tiers using PSD and FC features. On unseen test data, our proposed model demonstrated a 3–9% improvement in prediction accuracy for main disorders and a 4–6% improvement for specific disorders, compared to existing methods. This approach offers the potential for more reliable and explainable diagnostic tools for mental disorder prediction. Full article

Intrabody communication (IBC) establishes a wireless connection between devices in a Wireless Body Area Network (WBAN) by utilizing the human body as a transmission medium. The characteristics of the IBC channel are significantly influenced by the geometric and biological features of the human body and tissues. This paper analyzes a dataset with experimental real subjects’ data on signal loss in a galvanic IBC channel, models IBC identification using the K-Nearest Neighbors (KNN) algorithm, and proposes a novel IBC WBAN architecture incorporating an identification function. The analysis of the dataset revealed that the IBC channel gain exhibits a wide range of variations depending on individual human body characteristics such as height, weight, body mass index, and body composition. Consequently, biometric identification can be leveraged within the IBC WBAN paradigm. Through modeling IBC identification on cleaned and labeled data, we demonstrated an identification accuracy of 99.9% based on the results of our modeling. The proposed IBC WBAN architecture with an integrated identification function is anticipated to enhance the application scope and accelerate the development of IBC WBANs. Full article

This review provides a comprehensive analysis of the design, materials, fabrication techniques, and applications of flexible wearable antennas, with a primary focus on their roles in Wireless Body Area Networks (WBANs) and healthcare technologies. Wearable antennas are increasingly vital for applications that require seamless integration with the human body while maintaining optimal performance under deformation and environmental stress. Return loss, gain, bandwidth, efficiency, and the SAR are some of the most important parameters that define the performance of an antenna. Their interactions with human tissues are also studied in greater detail. Such studies are essential to ensure that wearable and body-centric communication systems perform optimally, remain safe, and are in compliance with regulatory standards. Advanced materials, including textiles, polymers, and conductive composites, are analyzed for their electromagnetic properties and mechanical resilience. This study also explores innovative fabrication techniques, such as inkjet printing, screen printing, and embroidery, which enable scalable and cost-effective production. Additionally, solutions for SAR optimization, including the use of metamaterials, electromagnetic band gap (EBG) structures, and frequency-selective surfaces (FSSs), are discussed. This review highlights the transformative potential of wearable antennas in healthcare, the IoT, and next-generation communication systems, emphasizing their adaptability for real-time monitoring and advanced wireless technologies, such as 5G and 6G. The integration of energy harvesting, biocompatible materials, and sustainable manufacturing processes is identified as a future direction, paving the way for wearable antennas to become integral to the evolution of smart healthcare and connected systems. Full article

The backoff algorithm employed by the medium access control (MAC) protocol of the IEEE 802.15.4 standard has a significant impact on the overall performance of the wireless sensor network (WSN). This algorithm helps the MAC protocol resolve the contention among multiple nodes in accessing the wireless medium. The standard binary exponent backoff (BEB) used by the IEEE 802.15.4 MAC protocol relies on an incremental method that doubles the size of the contention window after the occurrence of a collision. In a previous work, we proposed the adaptive backoff algorithm (ABA), which adapts the contention window’s size to the value of the probability of collision, thus relating the contention resolution to the size of the WSN in an indirect manner. ABA was studied and tested using contention window sizes of up to 256. However, the latter limit on the contention window size led to degradation in the network performance as the size of the network exceeded 50 nodes. This paper introduces the Improved ABA (I-ABA), an improved version of ABA. In the design of I-ABA we observe the optimal values of the contention window that maximize performance under varying probabilities of collision. Based on that, we use curve fitting techniques to derive a mathematical expression that better describes the adaptive change in the contention window. This forms the basis of I-ABA, which demonstrates scalability and the ability to enhance performance. As a potential area of application for I-ABA, we target wireless body area networks (WBANs) that are large-scale, that is, composed of hundreds of sensor nodes. WBAN is a major application area for the emerging Internet of Things (IoT) paradigm. We evaluate the performance of I-ABA based on simulations. Our results show that, in a large-scale WBAN, I-ABA can achieve superior performance to both ABA and the standard BEB in terms of various performance metrics. Full article

Short-range Internet of Things (IoT) sensor nodes operating at 2.4 GHz must provide ubiquitous wireless sensor networks (WSNs) with energy-efficient, wide-range output power (POUT). They must also be fully integrated on a single chip for wireless body area networks (WBANs) and wireless personal area networks (WPANs) using low-power Bluetooth (BLE) and Zigbee standards. The proposed fully integrated transmitter (TX) utilizes a digitally controllable current-mode class-D (CMCD) power amplifier (PA) with a second harmonic distortion (HD2) suppression to reduce VCO pulling in an integrated system while meeting harmonic limit regulations. The CMCD PA is divided into 7-bit slices that can be reconfigured between differential and single-ended topologies. Duty cycle distortion compensation is performed for HD2 suppression, and an HD2 rejection filter and a modified C-L-C low-pass filter (LPF) reduce HD2 further. Implemented in a 28 nm CMOS process, the TX achieves a wide P_OUT range of from 12.1 to −31 dBm and provides a maximum efficiency of 39.8% while consuming 41.1 mW at 12.1 dBm P_OUT. The calibrated HD2 level is −82.2 dBc at 9.93 dBm P_OUT, resulting in a transmitter figure of merit (TX_FoM) of −97.52 dB. Higher-order harmonic levels remain below −41.2 dBm even at 12.1 dBm P_OUT, meeting regulatory requirements. Full article

The design of the aperture-fed annular ring (AFAR) microstrip antenna is presented. This proposed design will ease the fabrication and usability of the 3D-printed and solderless 2D materials. This antenna consists of three layers: the patch, the slot within the ground plane as the power transfer medium, and the microstrip line as the feeding. The parameters of the proposed design are investigated using the finite element method FEM to achieve the 50 Ω impedance with the maximum front-to-back ratio of the radiation pattern. This study was performed based on four steps, each investigating one parameter at a time. These parameters were evaluated based on an initial design and prototype. The optimized design of 3D AFAR attained S₁₁ around 17 dB with a front-to-back ratio of more than 30 dB and a gain of around 3.3 dBi. This design eases the process of using a manufacturing process that involves 3D-printed and 2D metallic materials for antenna applications. Full article

In the current era of technology, the internet of things (IoT) plays a vital role in smart drug delivery systems. It is an emerging field that offers promising solutions for improving the efficacy, safety, and patient compliance of drug therapies. IoT-based drug delivery systems leverage advanced devices, sophisticated sensors, and smart tools to monitor and analyse the health matrices of the patient in real-time, allowing for personalised and targeted drug delivery. This technology is implemented through various types of devices, including wearable and implantable devices such as infusion pumps, smart pens, inhalers, and auto-injectors. However, the development and implementation of IoT-based drug delivery systems pose several challenges, such as ensuring data security and privacy, regulatory compliance, compatibility, and reliability. In this paper, the latest research on smart wearable devices and its analysis are addressed. It also focuses on the challenges of ensuring the safe and efficient use of this technology in healthcare applications. Full article

Intelligent telemedicine technology has been widely applied due to the quick development of the Internet of Things (IoT). The edge-computing scheme can be regarded as a feasible solution to reduce energy consumption and enhance the computing capabilities for the Wireless Body Area Network (WBAN). For an edge-computing-assisted intelligent telemedicine system, a two-layer network architecture composed of WBAN and Edge-Computing Network (ECN) was considered in this paper. Moreover, the age of information (AoI) was adopted to describe the time cost for the TDMA transmission mechanism in WBAN. According to the theoretical analysis, the strategy for resource allocation and data offloading in edge-computing-assisted intelligent telemedicine systems can be expressed as a system utility function optimizing problem. To maximize the system utility, an incentive mechanism based on contract theory (CT) was considered to motivate edge servers (ESs) to participate in system cooperation. To minimize the system cost, a cooperative game was developed to address the slot allocation in WBAN, while a bilateral matching game was utilized to optimize the data offloading problem in ECN. Simulation results have verified the effectiveness of the strategy proposed in terms of the system utility. Full article

Internet of things (IoT)-enabled wireless body area network (WBAN) is an emerging technology that combines medical devices, wireless devices, and non-medical devices for healthcare management applications. Speech emotion recognition (SER) is an active research field in the healthcare domain and machine learning. It is a technique that can be used to automatically identify speakers’ emotions from their speech. However, the SER system, especially in the healthcare domain, is confronted with a few challenges. For example, low prediction accuracy, high computational complexity, delay in real-time prediction, and how to identify appropriate features from speech. Motivated by these research gaps, we proposed an emotion-aware IoT-enabled WBAN system within the healthcare framework where data processing and long-range data transmissions are performed by an edge AI system for real-time prediction of patients’ speech emotions as well as to capture the changes in emotions before and after treatment. Additionally, we investigated the effectiveness of different machine learning and deep learning algorithms in terms of performance classification, feature extraction methods, and normalization methods. We developed a hybrid deep learning model, i.e., convolutional neural network (CNN) and bidirectional long short-term memory (BiLSTM), and a regularized CNN model. We combined the models with different optimization strategies and regularization techniques to improve the prediction accuracy, reduce generalization error, and reduce the computational complexity of the neural networks in terms of their computational time, power, and space. Different experiments were performed to check the efficiency and effectiveness of the proposed machine learning and deep learning algorithms. The proposed models are compared with a related existing model for evaluation and validation using standard performance metrics such as prediction accuracy, precision, recall, F1 score, confusion matrix, and the differences between the actual and predicted values. The experimental results proved that one of the proposed models outperformed the existing model with an accuracy of about 98%. Full article

In recent years, eHealth systems based on the Internet of Things (IoT) have attracted considerable attention. The wireless body area network (WBAN) is an essential technology of eHealth systems. A major challenge in WBAN is the design of the medium access control (MAC) protocol, which plays a significant role in avoiding collisions, enhancing the energy efficiency, maximizing the network life, and improving the quality of service (QoS) as well as the quality of experience (QoE). In this study, we apply the mobile edge computing (MEC) network architecture to an eHealth system and design a multi-channel MAC protocol for WBAN based on the Markov decision process (MDP). In this protocol, the channel condition and the reward value are considered. By continuously interacting with the environment, the optimal channel resource allocation strategy is generated. Simulation results indicate that the proposed WBAN MAC protocol can adaptively assign different channels to the sensor nodes for data transmission, thereby reducing the collision rate, decreasing the energy consumption, improving the channel utilization, and enhancing the system throughput and QoE. Full article