Search Results (37)

Future smart cities will consist of a heterogeneous environment, including UGVs (Unmanned Ground Vehicles) and UAVs (Unmanned Aerial Vehicles), used for different applications such as last mile delivery. Considering the vulnerabilities of GNSS (Global Navigation System Satellite) in urban environments, a resilient PNT (Position, Navigation, Timing) solution is needed. A key research question within the PNT community is the capability to deliver a robust and resilient time solution to multiple devices simultaneously. The paper is proposing an innovative time dissemination framework, based on IQuila’s SDN (Software Defined Network) and quantum random key encryption from Quantum Dice to multiple users. The time signal is disseminated using a wireless IEEE 802.11ax, through a wireless AP (Access point) which is received by each user, where a KF (Kalman Filter) is used to enhance the timing resilience of each client into the framework. Each user is equipped with a Jetson Nano board as CC (Companion Computer), a GNSS receiver, an IEEE 802.11ax wireless card, an embedded RTC (Real Time clock) system, and a Pixhawk 2.1 as FCU (Flight Control Unit). The paper is presenting the performance of the fusion framework using the MUEAVI (Multi-user Environment for Autonomous Vehicle Innovation) Cranfield’s University facility. Results showed that an alternative timing source can securely be delivered fulfilling last mile delivery requirements for aerial platforms achieving sub millisecond offset. Full article

The increasing deployment of IEEE 802.11ax (Wi-Fi 6) networks necessitates an accurate assessment of radiofrequency electromagnetic field (RF-EMF) exposure under realistic usage scenarios. This study investigates the duty cycle (DC) and corresponding exposure levels of Wi-Fi 6 in controlled laboratory conditions, focusing on bandwidth variations, multi-user scenarios, and application types. DC measurements reveal significant variability across internet services, with FTP upload exhibiting the highest mean DC (94.3%) under 20 MHz bandwidth, while YouTube 4K video streaming showed bursts with a maximum DC of 89.2%. Under poor radio conditions, DC increased by up to 5× for certain applications, emphasizing the influence of degraded signal-to-noise ratio (SNR) on retransmissions and modulation. Weighted exposure results indicate a reduction in average electric-field strength by up to 10× when incorporating DC, with maximum weighted exposure at 4.2 V/m (6.9% of ICNIRP limits) during multi-user scenarios. These findings highlight the critical role of realistic DC assessments in refining exposure evaluations, ensuring regulatory compliance, and advancing the understanding of Wi-Fi 6’s EMF exposure implications. Full article

This article describes the design, implementation, and evaluation of an indoor localization system based on Received Signal Strength Indicator (RSSI) measurements in wireless sensor networks. While the majority of the literature uses the IEEE 802.15 standard for this type of system, all of the measurements in this study were performed using a test bench operating under the IEEE 802.11ax standard in the 2.4 GHz band. RSSI is widely used due to its simplicity and availability; however, its accuracy is limited by signal attenuation, electromagnetic interference, and environmental variability. To mitigate these limitations, the present work proposes the implementation of advanced techniques, including weighted averages and positioning algorithms such as Min–Max, Maximum Likelihood, and trilateration, aiming to achieve an accuracy of 2 m in controlled conditions. The design also included a specialized test bench to calculate the coordinates and estimate the location of unknown nodes using anchor node positioning. This approach combines the simplicity of RSSI with optimized algorithms, providing a robust and practical solution for indoor localization. The results validate the system’s effectiveness and highlight its potential for future applications in real-world environments, opening new possibilities for optimizing wireless sensor networks and addressing the current challenges in localization systems. Full article

The advent of Sixth Generation (6G) wireless technologies introduces challenges and opportunities for Mobile Ad Hoc Networks (MANETs) and Vehicular Ad Hoc Networks (VANETs), necessitating a reevaluation of traditional routing protocols. This paper introduces the Multi-Metric Scoring Dynamic Source Routing (MMS-DSR), a novel enhancement of the Dynamic Source Routing (DSR) protocol, designed to meet the demands of 6G-enabled MANETs and the dynamic environments of VANETs. MMS-DSR integrates advanced technologies and methodologies to enhance routing performance in dynamic scenarios. Key among these is the use of a CNN-LSTM-based beamforming algorithm, which optimizes beamforming vectors dynamically, exploiting spatial-temporal variations characteristic of 6G channels. This enables MMS-DSR to adapt beam directions in real time based on evolving network conditions, improving link reliability and throughput. Furthermore, MMS-DSR incorporates a multi-metric scoring mechanism that evaluates routes based on multiple QoS parameters, including latency, bandwidth, and reliability, enhanced by the capabilities of Massive MIMO and the IEEE 802.11ax standard. This ensures route selection is context-aware and adaptive to changing dynamics, making it effective in urban settings where vehicular and mobile nodes coexist. Additionally, the protocol uses machine learning techniques to predict future route performance, enabling proactive adjustments in routing decisions. The integration of dynamic beamforming and machine learning allows MMS-DSR to effectively handle the high mobility and variability of 6G networks, offering a robust solution for future wireless communications, particularly in smart cities. Full article

Stopes suffer from unreliable wireless communication due to their harsh environment. There is a lack of confidence within industry regarding the effectiveness of existing solutions in providing reliable high-bandwidth performance in hard rock stopes. This work proposes that Wi-Fi6 is a good candidate for reliable high-bandwidth communications in underground hard rock stopes. Experiments in a tunnel and mine stope were conducted to evaluate the performance of Wi-Fi6 in terms of latency, jitter, and throughput. Different criteria, such as multi-hop systems, varying multipath, mesh routing protocols, and frequencies at different bandwidths, were used to evaluate performance. The results show that Wi-Fi6 performance is greater in stopes compared to tunnels. Signal quality evaluations were conducted using the Asus RT-AX53U running OpenWrt, and an additional experiment was conducted on the nrf7002dk running Zephyr OS to evaluate the power consumption of Wi-Fi6 against the industry standard for low-powered wireless communications, IEEE 802.15.4. Wi-Fi6 was found to be more power-efficient than IEEE 802.15.4 for Mbps communications. These experiments highlight the signal robustness of Wi-Fi6 in stope environments and also highlights its low-powered nature. This work also highlights the performance of the two most widely used open-source mesh routing protocols for Wi-Fi. Full article

A novel modification of IP networks integrated optimization method for heterogeneous networks, for example, the seamless Wi-Fi network serving simultaneously mobile users and wireless sensors, has been developed in this article. The mutual influence of signal reception, frequency-territorial planning, and routing procedures in heterogeneous networks have been analyzed in the case of simultaneous data transmission by both mobile users and wireless sensors. New principles for the listed procedures interaction and the basic functions for their describing are formulated. A novel modification of the integrated optimization method and its algorithm have been developed. The developed method's effectiveness has been analyzed for the IEEE 802.11ax network segment. Its result showed that the network load was decreased by an average of 20%, the data rate over the network as a whole increased for users and sensors by an average of 25% and 40%, respectively, and the sensors’ lifetime increased by an average of 20% compared to the novel modification of the Collective Dynamic Routing method. Full article

This paper presents a novel frequency reconfigurable antenna design for sub-6 GHz applications, featuring a unique combination of antenna elements and control mechanisms. The antenna is composed of an outer split-ring resonator loaded with an inner spiral resonator, which can be adjusted through the remote control of PIN diode or Single Pole Double Throw (SPDT) switches. The compact antenna, measuring 22 × 16 × 1.6 mm³, operates in broadband, or tri-band mode depending on the ON/OFF states of switches. The frequency reconfigurability is achieved using two BAR64−02V PIN diodes or two CG2415M6 SPDT switches acting as RF switches. SPDT switches are controlled remotely via Arduino unit. Additionally, the antenna demonstrates an omni-directional radiation pattern, making it suitable for wireless communication systems. Experimental results on an FR-4 substrate validate the numerical calculations, confirming the antenna’s performance and superiority over existing alternatives in terms of compactness, wide operating frequency range, and cost-effectiveness. The proposed design holds significant potential for applications in Wi-Fi (IEEE 802.11 a/n/ac), Bluetooth (5 GHz), ISM (5 GHz), 3G (UMTS), 4G (LTE), wireless backhaul (4G and 5G networks), WLAN (IEEE 802.11 a/n/ac/ax), 5G NR n1 band, and Wi-Fi access points due to its small size and easy control mechanism. The antenna can be integrated into various devices, including access points, gateways, smartphones, and IoT kits. This novel frequency reconfigurable antenna design presents a valuable contribution to the field, paving the way for further advancements in wireless communication systems. Full article

The increase in channel bandwidth and peak-to-average power ratio (PAPR) of modern communication standards poses a serious challenge to performing channel power (CP) and complementary cumulative distribution function (CCDF) measurements in real-time using standard measurement solutions based on spectrum analyzers (SA). Recently, Software Defined Radio (SDR) technology has become a viable alternative to the conventional real-time spectrum monitoring approach based on SA due to its reduced cost. Therefore, in this paper, we propose a novel, innovative, agile and cost-effective solution to enable both CP and CCDF measurements on a state-of-the-art SDR platform. The proposed solution exploits the ability of the SDR equipment to access signal samples in the time domain and defines both CP and CCDF-type measurements. The two measurement functions are software implemented in GNU Radio by designing customized blocks and integrated into a graphical user interface. The proposed system was first tested and parameterized in a controlled environment using emitted signals specific to the IEEE 802.11ax family of wireless local area networks. After parameterization, the SDR-based system was used for over-the-air measurements of signals emitted in the 4G+, 5G and 802.11ax communication standards. By performing the measurement campaign, we have demonstrated the capabilities of the measurement system in performing real-time measurements on broadband channels (up to 160 MHz for IEEE 802.11ax). Altogether, we have proved the usability of CP and CCDF measurement functions in providing valuable insights into the power distribution characteristics of signals emitted by the latest communication standards. By exploiting the versatility of SDR technology, we have enabled a cost-effective solution for advanced real-time statistical measurements of modern broadband signals. Full article

To improve the quality of service (QoS) on the internet of medical things, a cognitive radio (CR) protocol based on orthogonal frequency division multiple access (OFDMA) is proposed, named CR-OFDMA. In this protocol, we divide a complete channel into multiple orthogonal subchannels and enhance the subchannel assignment scheme, which achieves QoS improvement under consideration of priority and fairness. Furthermore, we improve spectrum resource utilization by fully utilizing the remaining subchannels, feedback slots, and backoff slots. Then, a two-dimensional Markov model is established to describe the dynamic characteristics of the protocol operation, where the backoff stage and the backoff counter value constitute the system state. By establishing the traffic conservation equations for the system operation, the transmission probability and collision probability are calculated, and expressions of system throughput, channel utilization, and fairness index are derived. Finally, numerical results validate the advantages of CR-OFDMA. Full article

This paper presents an analysis of the IEEE 802.11ax networks’ coexistence with legacy stations, namely IEEE 802.11ac, IEEE 802.11n, and IEEE 802.11a. The IEEE 802.11ax standard introduces several new features that can enhance network performance and capacity. The legacy devices that do not support these features will continue to coexist with newer devices, creating a mixed network environment. This usually leads to a deterioration in the overall performance of such networks; therefore, in the paper, we want to show how we can reduce the negative impact of legacy devices. In this study, we investigate the performance of mixed networks by applying various parameters to both the MAC and PHY layers. We focus on evaluating the impact of the BSS coloring mechanism introduced to the IEEE 802.11ax standard on network performance. We also examine the impact of A-MPDU and A-MSDU aggregations on network efficiency. Through simulations, we analyze the typical performance metrics such as throughput, mean packet delay, and packet loss of mixed networks with different topologies and configurations. Our findings indicate that implementing the BSS coloring mechanism in dense networks can increase throughput by up to 43%. We also show that the presence of legacy devices in the network disrupts the functioning of this mechanism. To address this, we recommend using an aggregation technique, which can improve throughput by up to 79%. The presented research revealed that it is possible to optimize the performance of mixed IEEE 802.11ax networks. Full article

In this paper, the design, simulation, fabrication, and characterization study of a low-cost and directional hybrid four-element (2 × 2 configuration) Minkowski–Sierpinski fractal antenna array (MSFAA) for the high-efficiency IEEE 802.11ax WLANs (Wi-Fi 6E) and the sub-6 GHz 5G wireless system is presented. Each element of the array is separated by 0.7 λ₀. The complete four-element fractal antenna array system includes designing the single-element Minkowski–Sierpinski fractal antenna using two different substrates for performance comparison and an equal-split Wilkinson power divider (WPD) to achieve power division and to form a feed network. The single-element antenna, four-element fractal antenna array, and WPDs are fabricated using a flame-resistant (FR4) glass epoxy substrate with a dielectric constant (ε_r) of 4.3 and thickness (h) of 1.66 mm. For performance comparison, a high-end Rogers thermoset microwave material (TMM4) substrate is also used, having ε_r = 4.5 and h = 1.524mm, respectively. The designed four-element fractal antenna array operates at the dual-band frequencies of 4.17 and 5.97 GHz, respectively. The various performance parameters of the antenna array, such as return loss, bandwidth, gain, and 2D and 3D radiation patterns, are analyzed using CST Microwave Studio. The fabricated four-element antenna array provides the bandwidth and gain characteristic of 85 MHz/4.19 dB and 182 MHz/9.61 dB at 4.17 and 5.97 GHz frequency bands, respectively. The proposed antenna array design gives an improvement in the bandwidth, gain, and radiation pattern in the boresight at both frequencies. In the IEEE 802.11 ax WLANs (Wi-Fi 6E) deployments and the upcoming 5G wireless and satellite communication systems, it is critical to have directional antenna arrays to focus the radiated power in any specific direction. Therefore, it is believed that the proposed dual-band four-element fractal antenna array with directional radiation patterns can be an ideal candidate for the high-efficiency IEEE 802.11ax WLANs (Wi-Fi 6E) and the upcoming 5G wireless and satellite communication systems. Full article

Metaheuristic optimization techniques have successfully been used to solve the Optimal Power Flow (OPF) problem, addressing the shortcomings of mathematical optimization techniques. Two of the most popular metaheuristics are the Genetic Algorithm (GA) and Particle Swarm Optimization (PSO). The literature surrounding GA and PSO OPF is vast and not adequately organized. This work filled this gap by reviewing the most prominent works and analyzing the different traits of GA OPF works along seven axes, and of PSO OPF along four axes. Subsequently, cross-comparison between GA and PSO OPF works was undertaken, using the reported results of the reviewed works that use the IEEE 30-bus network to assess the performance and accuracy of each method. Where possible, the practices used in GA and PSO OPF were compared with literature suggestions from other domains. The cross-comparison aimed to act as a first step towards the standardization of GA and PSO OPF, as it can be used to draw preliminary conclusions regarding the tuning of hyper-parameters of GA and PSO OPF. The analysis of the cross-comparison results indicated that works using both GA and PSO OPF offer remarkable accuracy (with GA OPF having a slight edge) and that PSO OPF involves less computational burden. Full article

Multiple input multiple output (MIMO) technology combined with orthogonal frequency division multiple access (OFDMA) is an enabling technology used in WiFi 6/6E (IEEE 802.11ax) to increase the throughput. With the addition of WiFi 6/6E and taking advantage of MIMO and OFDMA, many applications of wearable WiFi can be imagined. For example, WiFi can be used for tracking and fall detection. Wearable devices, such as those used in gaming, vital sign monitoring, and tracking, can also take advantage of wearable MIMO antennas. In this paper, a wearable small dual-band antenna is proposed that can be fabricated on felt or denim substrate. In the proposed antenna, a conductive layer is used as a reflector to improve the gain and reduce the sensitivity of the antenna performance to the body loading effects. The details of the design and its performance in a sample indoor MIMO setting are provided. The MIMO antenna is proposed for WiFi tracking and sensing applications. The performance of the MIMO antenna in an indoor setting is examined. Full article

Orthogonal frequency-division multiple access (OFDMA) has attracted great attention as a key technology for uplink enhancement for Wi-Fi, since it can effectively reduce network congestion and channel access delay. Unfortunately, the traditional random access protocol of Wi-Fi seldom allows these benefits to be achieved, especially in dense network environments, as the access point (AP) rarely gains the channel access needed to trigger OFDMA uplink transmissions due to severe frame collisions. To address this problem, we propose a new channel access scheme called Contention-Free Channel Access for 802.11ax (CFX). In the proposed scheme, users can access the channel without contention, since they are guaranteed a transmission opportunity immediately after another user’s transmission. To realize CFX on top of the existing Buffer Status Report/BSR Poll (BSR/BSRP) exchange protocol of 802.11ax, we develop an additional scheme based on shared channel access that helps the AP to obtain the buffer status of users and manage a contention-free channel access schedule. In addition, in order to appropriately utilize the savings from the reduced frame collisions, we conduct sum throughput maximization using an actor-critic proximal policy optimization (PPO)-based deep reinforcement learning approach. The results of an extensive evaluation show that CFX not only significantly improves the uplink performance of Wi-Fi in terms of throughput and channel access delay but can also dynamically adjust the parameters in response to changes in the network status. Full article

The widespread use of the Internet of Things makes it relevant to use public IP networks for simultaneous access by both users and wireless sensors. To achieve this, a significant reduction in the subscriber devices’ energy consumption is required. This paper analyzes the application features of the collective dynamic routing method both with and without the use of a robust method for estimating the channel data rate for sensors’ communication in wireless public networks. Based on the analysis, a novel modification of the collective dynamic routing method has been developed that reduces the sensors’ energy consumption while keeping a high data rate and short delivery time for users. An analysis of the network load, the total data transfer rate over the network, and the parameters affecting the sensors’ energy consumption was carried out for a segment of a seamless IEEE 802.11ax network. The simulation demonstrated a high efficiency of using a novel modification of the collective dynamic routing method for access to users and wireless sensors. Full article