Search Results (87)

The Eastern Carpathians are thrust to the east and north over their Eastern European foreland, tectonically covering it over an area several hundred kilometers across. Information about the nature of the underthrust part of the Carpathian foreland can be obtained from the rock fragments preserved in the sedimentary successions of the Carpathian fold and thrust belt, specifically in the Outer Dacides and the Moldavides. Fragments of felsic rocks occurring within the sedimentary units of the Upper Cretaceous successions of the Moldavides have long been attributed to the Cuman Cordillera—an intrabasinal ridge in the Eastern Outer Carpathians. This work is the first complex geochemical and geochronological study on the exotic igneous clasts of the Cuman Cordillera. Igneous clasts from the southern part of the Moldavides (Variegated clay nappe/formation) are investigated here. They include mainly granites and rhyolites. Phaneritic rocks are composed of cumulus plagioclase, albite, amphibole and biotite, and intercumulus quartz and potassium feldspar, with apatite, magnetite, sphene, and zircon as main accessories, while the porphyritic rocks have a mineral assemblage similar to that mentioned above, displayed in a porphyritic texture with a usually crystallized groundmass. SHRIMP U-Pb zircon dating indicated the 583–597 Ma age interval for magma crystallization. Based on calcareous nannofossils, the depositional age of the investigated igneous clasts is Cenomanian to Maastrichtian, implying that the Cuman Cordillera was an emerged piece of land, herein an active source of sediments in the flysch basin for at least 40 Ma, from the Early Cretaceous (Aptian) to the Late Cretaceous (Maastrichtian). The intrusive and subvolcanic rocks show similar trends for trace and major elements, evincing their comagmatic nature. The enrichment in LILE and LREE relative to HFSE and HREE, as well as the element anomalies (e.g., negative Nb, Ta, and Eu and positive Rb, Ba, K, and Pb) suggest a convergent continental plate margin tectonic setting. Mineral chemistry suggests magma crystallization in relatively oxic conditions (magnetite series), during ascent within a depth of 15 km to 5 km. The igneous rocks attributed to the Cuman ridge display compositional and geochronological features similar to Brno and Thaya batholiths in the Brunovistulian terrane, which could be a piece of the Carpathian foreland not covered by the Tertiary thrusts. Our data confirm the non-Carpathian origin of the igneous clasts, revealing a Neoproterozoic history of the Carpathian foreland units, which include a Cadomian/Pan-African continental arc, exposed mainly during the Late Cretaceous as an intrabasinal island of the Alpine Tethys, traditionally known as the Cuman Cordillera. Full article

In recent years, major breakthroughs have been achieved in oil and gas exploration within China’s complex thrust–fault zones in the western region, confirming their significant potential. The northern piedmont zone of the Turpan–Hami Basin, a classic thrust–fold belt formed by the Bogda Orogenic belt’s overthrusting, has seen the discovery of several Jurassic–Cretaceous hydrocarbon fields, yet exploration at its thrust-front margins remains relatively underdeveloped. This study focuses on the central piedmont segment at Qialekan and Kekeya, integrating 3D seismic data with fault-related folding theory and balanced cross-section restoration to systematically analyze the area’s tectonic evolution. We specifically examine the formation and modification of wedge structures and assess their petroleum geological significance. Our results indicate that the wedge bodies formed in the Late Jurassic, along with their subsequent basinward insertion, critically controlled the present-day structural framework. In the Qialekan area, wedge formation coincided with the main hydrocarbon expulsion phase of underlying Permian source rocks. Type I faults acted as effective migration pathways, while later tectonic reworking was limited, favoring for hydrocarbon preservation. In contrast, in the Kekeya area, wedge structures underwent intense modification by Type II faults, which pierced the wedge and facilitated vertical hydrocarbon migration, creating a mixed-source accumulation pattern. The findings of this study provide new theoretical insights and practical guidance for future exploration in the northern piedmont zone and also offer a valuable reference for hydrocarbon exploration in structurally similar foreland basins. Full article

The Sanandaj–Sirjan Zone and Zagros Fold–Thrust Belt in Iran host numerous Mediterranean-type karst bauxite deposits; however, their formation mechanisms and critical raw material potential remain ambiguous. This study combines mineralogical and geochemical analyses to explore (1) the formation of authigenic minerals, (2) the role of microbial organic processes in Fe cycling, and (3) the assessment of their critical raw materials potential. Mineralogical analyses of the Late Cretaceous Daresard and Middle–Late Permian Yakshawa bauxites reveal distinct horizons reflecting their genetic conditions: Yakshawa exhibits a vertical weathering sequence (clay-rich base → ferruginous oolites → nodular massive bauxite → bleached cap), while Daresard shows karst-controlled profiles (breccia → oolitic-pisolitic ore → deferrified boehmite). Authigenic illite forms via isochemical reactions involving kaolinite and K-feldspar dissolution. Scanning electron microscopy evidence demonstrates illite replacing kaolinite with burial depth enhancing crystallinity. Diaspore forms through both gibbsite transformation and direct precipitation from aluminum-rich solutions under surface conditions in reducing microbial karst environments, typically associated with pyrite, anatase, and fluorocarbonates under neutral–weakly alkaline conditions. Redox-controlled Fe-Al fractionation governs bauxite horizon development: (1) microbial sulfate reduction facilitates Fe³⁺ → Fe²⁺ reduction under anoxic conditions, forming Fe-rich horizons, while (2) oxidative weathering (↑Eh, ↓moisture) promotes Al-hydroxide/clay enrichment in upper profiles, evidenced by progressive total organic carbon depletion (0.57 → 0.08%). This biotic–abiotic coupling ultimately generates stratified, high-grade bauxite. Finally, both the Yakshawa and Daresard karst bauxite ores are enriched in critical raw materials. It is worth noting that the overall enrichment appears to be mostly driven by the processes that led to the formation of the ores and not by the chemical features of the parent rocks. Divergent bauxitization pathways and early diagenetic processes—controlled by paleoclimatic fluctuations, redox shifts, and organic matter decay—govern critical raw material distributions, unlike typical Mediterranean-type deposits where parent rock composition dominates critical raw material partitioning. Full article

The Sredogriv greenschist facies rocks belong to the Western Balkan Zone in northwestern Bulgaria. The low-grade rocks consist of clastic-tuffaceous precursors and presumably olistostromic magmatic bodies. We present U-Pb LA-ICP-MS zircon age constraints for the Sredogriv metaconglomerate, intruding metaalbitophyre and a breccia-conglomerate of the sedimentary cover. Detrital zircons in the Sredogriv metaconglomerate yield a maximum depositional age of 523 Ma, with a prominent NeoproterozoicEarly Cambrian detrital zircon age clusters derived from igneous sources. The metaalbitophyre crystallized at 308 Ma and contains the same age clusters of inherited zircons. A 263 Ma maximum age of deposition is defined for a breccia-conglomerate of the Smolyanovtsi Formation from the sedimentary cover that recycled material from the Sredogriv metamorphics and Carboniferous–Permian magmatic rocks. The depositional setting of the Sredogriv sedimentary succession is characterized by proximity to Cadomian island arc sources and provenance from the northern periphery of Gondwana. The timing of the Variscan greenschist facies metamorphism of the Sredogriv metamorphics is bracketed between 308 Ma and the depositional age of 272 Ma of another adjacent clastic formation. These results constrain the timing of the Cadomian sedimentary history and the Variscan magmatic and tectono-metamorphic evolution in this part of the Western Balkan Zone. Full article

In the Posušje region of the External Dinarides (Bosnia and Herzegovina), bauxite deposits are hosted along a Late Cretaceous–Paleogene forebulge unconformity that records an extended emersion phase of the Adriatic Carbonate Platform. Historically, open-pit mining has targeted surface and shallow subsurface bauxite bodies, but ongoing exploration must now focus on deeper structurally preserved deposits. To address this challenge, we integrate remote sensing, geological mapping, borehole data, and 3D structural modeling to assess the distribution and structural controls of bauxite deposits. Balanced and restored cross-sections reveal a complex interplay between inverted normal faults, fold structures, and foredeep burial, which collectively influenced bauxite accumulation and preservation. Statistical analyses of deposit size, shape, and orientation indicate that larger bauxite bodies are concentrated in the footwalls of inverted normal faults, where prolonged or repeated exposure enhanced karst development and bauxite accumulation. Additionally, the predominant NW–SE elongation of bauxite bodies suggests that pre-existing structural lineaments played a key role in paleokarst morphology, supporting the influence of syn-depositional extensional faulting on bauxite distribution. These findings demonstrate that bauxite exploration in fold–thrust belts requires an integrated structural approach, where 3D geological modeling can delineate prospective areas prior to costly geophysical surveys and drilling campaigns. Insights from the Posušje region can refine mineral exploration strategies in other orogenic settings, highlighting the importance of structural inheritance in karst bauxite accumulation and preservation. Full article

The sandstone sections in the Upper Jurassic red beds of the Yongjin area in the central Junggar Basin are important oil and gas reservoirs. The debate over whether red beds are of primary depositional or secondary diagenetic origin persists, leading to uncertainties in the interpretation of reservoir sedimentary facies. This study uses core samples and employs thin section microscope observations, scanning electron microscopy, X-ray diffraction, and major and trace element analyses to investigate the formation period and paleoclimate conditions of red beds and explore the origin of red sandstone. The Upper Jurassic red beds are mainly deposited in arid delta plain environments. The framework grains of the red sandstone are composed of quartz (averaging 22.6%), feldspar (averaging 16.3%), and rock fragments (averaging 36.7%). The rock fragments in the sandstone are mainly composed of intermediate basic volcanic rocks and cryptocrystalline acid volcanic rocks, which are rich in mafic silicate minerals such as olivine, pyroxene, ilmenite, and magnetite. In situ hematitization of ilmenite is observed in the rock fragments, suggesting that the in situ alteration of mafic silicate minerals in the parent rock is the main source of iron ions for hematite. Tiny hematite crystals (2.1 μm) are observed in clay mineral micropores via SEM. Abundant mixed-layer illite/smectite clay indicates early smectite transformation, providing a minor source of iron ions for hematite. Hematite in the red sandstone occurs as a grain-coating type, predating quartz overgrowth, feldspar overgrowth, and (ferroan) calcite and (ferroan) dolomite precipitation. Residual hematite coatings between detrital grain point contacts indicate that hematite is a product of syn-sedimentary or very early diagenetic precipitation, ruling out the possibility that red sandstone formation was caused by later atmospheric water leaching during the fold and thrust belt stage. The average chemical index of alteration (CIA) for the red sandstone is 52.2, whereas the CIA for the red mudstone averages 59.5, and the chemical index of weathering (CIW) reached a maximum of 69. These values indicate that the rocks have undergone mild chemical weathering in arid climates. Additionally, the ratios of trace elements indicate that the water bodies were in an oxidizing state during the sedimentary period. The arid climate and oxidative water conditions were ideal for hematite preservation, thus facilitating red bed formation. The red bed sediments in the study area represent a direct response to the Late Jurassic aridification event and can be compared to global climate change. The results have important implications for stratigraphic correlation and interpretation of reservoir sedimentary facies in the study area while also providing a valuable case study for global research on red beds. Full article

A multidisciplinary analysis of the Pennsylvanian Castelo Branco pluton of Central Iberian Zone (Iberian Variscan belt) was made, focusing on its magnetic behavior and fabric, microstructures, microfractures, and radiometric and gravimetric anomalies. The findings reveal that the Castelo Branco pluton is an ilmenite-type granite, characterized by low magnetic susceptibility values. The petrographic observations and high-temperature solid-state deformation indicate that pluton was emplaced during the latest compression phase (D₃) of the Variscan tectonic regime. Magnetic fabric and gravimetric data show that the Castelo Brano pluton has a flat-shaped geometry with a depth of approximately 2–3 km, a feeding zone corresponding to NE-SW-trending regional faults, and that its fabric is oriented parallel to the NW-SE-trending regional foliation of the host rocks. The concentric magnetic foliation in the Alcains granite suggests an earlier ascent and emplacement compared to the Rio de Moinhos and S. Miguel da Acha granites, with Alcains demonstrating a laccolithic shape indicative of significant upward force. The ascent pathways of the different granites seem to have occurred along pre-existing NE-SW faults. The Castelo Branco pluton displays zoned nesting, with fluid inclusion planes indicating NNE-SSW to NE-SW and ENE-WSW trends in biotite-rich granites, and NNE-SSW to NE-SW and ESE-WNW trends in two-mica granites. Structural alignments in the study area show both NE-SW and NW-SE trends. The NE-SW faults and thrust faults are supported by residual gravimetric anomaly data, and NW-SE alignments are evident in magnetic fabric and regional folded structures. These findings enhance our understanding of the geodynamic processes influencing the Variscan plutonism in the Central Iberian Zone, positioning the Castelo Branco pluton as a key component in this geological puzzle. Full article

Constraining the collision timing of India and Asia requires reliable information from the coeval geological record along the ~2400 km long collisional margin. This study provides insights into the India–Asia collision at the westernmost margin of the Indian Plate using combined U-Pb geochronological data and sandstone petrography. The study area is situated in the vicinity of Fort Munro, Pakistan, along the western margin of the Indian Plate, and consists of the Paleocene Dunghan Formation and Eocene Ghazij Formation. The U-Pb ages of detrital zircons from the Dunghan Formation are mainly clustered between ~453 and 1100 Ma with a second minor cluster between ~1600 and 2600 Ma. These ages suggest that the major source contributing to the Dunghan Formation was likely derived from basement rocks and the cover sequence exposed mainly in Tethyan Himalaya (TH), Lesser Himalaya (LH), and Higher Himalayan (HH). Petrographic results suggest that the quartz-rich samples from the Dunghan Formation are mineralogically mature and have likely experienced log-distance transportation, which is possible in the case of an already established and well-developed river system delivering the sediments from the Craton Interior provenance. Samples of the overlying Ghazij Formation show a major detrital zircon age clustered at ~272–600 Ma in the lower part of the formation, comparable to the TH. In the middle part, the major cluster is at ~400–1100 Ma, and a minor cluster at ~1600–2600 Ma similar to the age patterns of TH, LH, and HH. However, in the uppermost part of the Ghazij Formation, ages of <100 Ma are recorded along with 110–166 Ma, ~400–1100 Ma, and ~1600–2600 Ma clusters. The <100 Ma ages were mainly attributed to the northern source, which was the Kohistan-Ladakh arc (KLA). The ~110–166 Ma ages are possibly associated with the TH volcanic rocks, ophiolitic source, and Karakoram block (KB). The Paleozoic to Archean-aged zircons in the Ghazij Formation represent an Indian source. This contrasting provenance shift from India to Asia is also reflected in the sandstone petrography, where the sample KZ-09 is plotted in a dissected arc field. By combining the U-Pb ages of the detrital zircons with sandstone petrography, we attribute this provenance change to the Asia–India collision that caused the provenance shift from the southern (Indian Craton) provenance to the northern (KLA and KB) provenance. In view of the upper age limit of the Ghazij Formation, we suggest the onset of Asian–Indian collision along its western part occurred at ca. 50–48 Ma, which is younger than the collision ages reported from central and northwestern segments of the Indian plate margin with 70–59 Ma and 56 Ma, respectively. Full article

The Longmen Shan fold and thrust belt, situated on the eastern margin of the Qinghai–Tibet Plateau, is prone to disasters like earthquakes and debris flows. Thus, applying rapid assessment methods for emergency water sources in disaster-affected areas is crucial for local populations and ensuring an effective response to disasters. In this study, we employed electrical resistivity tomography (ERT) to investigate groundwater resources in post-disaster regions. By integrating the results from ERT profiles with geological and borehole information, we determined the lithology and depth of aquifers. Additionally, we analyzed groundwater recharge and discharge patterns relative to surface water during various precipitation periods and generated a hydrogeological profile for the region. Borehole information confirmed our inferred lithology and aquifer depth, thereby ensuring a reliable water supply during emergencies. This study demonstrates the feasibility of ERT for rapidly identifying water resources in geologically complex environments, providing a scientific foundation for water resource management in disaster-prone regions. Full article

The Ahdeb oil field is located in the southwestern part of the Zagros fold deformation zone. The study of the model of the formation of the oil reservoir in this field will be helpful to deepen the pattern of hydrocarbon distribution in this zone. In this paper, we use the seismic data of the Ahdeb oil field to recover the tectonic evolution history of the field. Under neotectonic movement, the oil field formed in the early stage, migrated to the high point in the late stage, and finally entered the present formation. From here, for the oil-bearing inclusions within the reservoir, the photometric absorption values of the organic matter groups were measured by infrared spectroscopy. Their ratios were used to evaluate the maturity, thus discovering two phases of oil charging. Finally, using the hydrocarbon generation history and tectonic evolution history, combined with the oil and gas transportation periods in the reservoir, we deduce that the reservoir formation mode in the area is a two-phase gathering and final adjustment formation mode. This understanding of the hydrocarbon formation patterns will promote oil and gas exploration in this zone. Full article

The Tian Shan is a typical active intracontinental orogenic belt that is driven by the ongoing indentation of India into Eurasia. However, the geological features of Quaternary deformation, especially in the easternmost sector near Harlik Mountain, remain elusive. Field observations, topographic analysis, and Electron Spin Resonance (ESR) dating were employed to comprehensively assess the deformation features and evaluate the deformation pattern for this region during the Quaternary period. The results disclose evidence of deformation in the northern and southern foreland basins of Harlik Mountain. In the Barkol Basin to the north, crustal shortening results in the formation of surface scarps and folds, indicating north-directed thrusting, with a shortening rate of ~0.15 mm/yr. In the Hami Basin, the north-directed thrust elevates the granites, which offset the alluvial fans, with a shortening rate of ~0.18 mm/yr. Together with the shortening along the boundary fault, the aggregated north–south shortening rate is approximately 0.69 mm/yr in the easternmost Tian Shan, corresponding with the differential motion rate between the north and south Harlik Mountain revealed by the GPS velocity. These findings imply that, distal to the collision zone, tectonic strain in the eastern Tian Shan is primarily accommodated through the reactivation of pre-existing strike–slip faults, with crustal shortening concentrated at the overlapping position of parallel northeast-trending left-lateral strike–slip faults. Full article

The Qiulitage fold and thrust belt (QFTB) is situated in the Kuqa Depression, exhibiting spectacular salt structures with well-defined geometric and kinematic characteristics and thereby playing a significant role in advancing the study of salt structures worldwide. This research, based on regional geology, well logging, and newly acquired three-dimensional seismic data, applies principles of salt-related fault structures to interpret seismic data and restore structural equilibrium in the Qiulitage fold and thrust belt within the Kuqa Depression by conducting quantitative studies on structural geometry and kinematics. Results indicate clear differences in salt structures between the eastern and western segments of it, vertically divided into upper salt, salt layer, and lower salt and horizontally into four parts. The Dina segment features a single-row basement-involved thrust fault, the East QFTB segment displays detachment thrust faults involving cover layers, the Central QFTB segment exhibits detachment thrust faults involving multiple rows of cover layers, the leading edge forms structural wedges, and the West QFTB segment develops blind-thrust faults. During the deposition of the Kangcun formation, the eastern profile experiences an 18% shortening rate, 14% in the central part, and 9% in the western part. For the Kuqa formation, the eastern profile experiences a 10% shortening rate, 9% in the central part, and 3% in the western part, indicating more significant deformation in the east than in the west. Quantitative statistical analysis reveals that different types of detachments, paleogeomorphology, and northeast-directed compressive stress exert control over the Qiulitage fold-thrust belt. Full article

The Xujiashan Sb deposit located at the Mufushan fold thrust belt of the Yangtze block is one of the most important Sb deposits in this district. Stibnite in this deposit contains high and various contents of Se, but research on the distribution and enrichment of Se in stibnite remains limited. This paper conducts geochemical composition, C-H-O isotopic composition, and scanning electron microscopy morphology of the Xujiashan deposit to discuss the sources of ore-forming materials and fluid, as well as the distribution and enrichment mechanisms of selenium in stibnite. The results showed that the ores have trace element compositions comparable with the wall rocks, and Sb and Se contents are significantly higher than the average carbonate rocks. The δ¹³C_PDB values of calcite and quartz range from −12.8‰ to 5.5‰, the δ¹⁸O_SMOW values range from 20.4‰ to 24‰, and the δD_V-SMOW values range from −57.8‰ to −86.9‰. Trace element and isotope compositions indicate that the ore-forming materials were mainly derived from the wall rocks (sedimentary–metamorphic rocks) that S, Se, and Sb dissolved during fluid–rock interactions. The ore-forming fluids were metamorphic water produced by metamorphism, which had experienced multistage mixing with meteoric water and organic-rich fluids. Selenium substitutes for sulfur in the stibnite crystal lattice, causing rhythmically distributed Se contents in stibnite, which resulted from multistage physicochemical changes in ore-forming fluids during crystallization. The varied patterns of Se contents are the result of different cross-sections of the stibnite. Full article

On 14 November 2021, a doublet earthquake, each event of which had an Mw of 6.1, struck near Fin in the Simply Folded Belt (SFB) in southern Iran. The first quake occurred at 12:07:04 UTC, followed by a second one just a minute and a half later. The SFB is known for its blind thrust faults, typically not associated with surface ruptures. These earthquakes are usually linked to the middle and lower layers of the sedimentary cover. Identifying the faults that trigger earthquakes in the region remains a significant challenge and is subject to high uncertainty. This study aims to identify and determine the fault(s) that may have caused the doublet earthquake. To achieve this goal, we utilized the DInSAR method using Sentinel-1 to detect deformation, followed by finite-fault inversion and magnetic interpretation to determine the location, geometry, and slip distribution of the fault(s). Bayesian probabilistic joint inversion was used to model the earthquake sources and derive the geometric parameters of potential fault planes. The study presents two potential fault solutions—one dipping to the north and the other to the south. Both solutions showed no significant difference in strike and fault location, suggesting a single fault. Based on the results of the seismic inversion, it appears that a north-dipping fault with a strike, dip, and rake of 257°, 74°, and 77°, respectively, is more consistent with the geological setting of the area. The fault plane has a width of roughly 3.6 km, a length of 13.4 km, and a depth of 5.6 km. Our results revealed maximum displacements along the radar line of sight reaching values of up to −360 mm in the ascending orbit, indicating an unknown fault with horizontal displacements at the surface ranging from −144 to 170 mm and maximum vertical displacements between −204 and 415 mm. Aeromagnetic data for Iran were utilized with an average flight-line spacing of 7.5 km. The middle of the data observation period was considered to apply the RTP filter, and the DRTP method was used. We calculated the gradient of the residual anomaly in the N-S direction due to the direction of the existing faults and folds. The gradient map identified the fault and potential extension of the observed anomalies related to a fault with an ENE-WSW strike, which could extend to the ~ E-W. We suggest that earthquakes occur in the sedimentary cover of the SFB where subsurface faulting is involved, with Hormuz salt acting as an important barrier to rupture. The multidisciplinary approach used in this study, including InSAR and magnetic data, underscores the importance of accurate fault characterization. These findings provide valuable insights into the seismic hazard of the area. Full article

Regional-scale swarms of subparallel linear topographic features, known as lineament domains, are a common feature of planetary surfaces. Lineament domains are superficial manifestations of the crustal stress field trajectory. Notably, one of the effects of active tectonics is seismicity. Italy is one of the most seismically active regions in the Mediterranean, with many destructive earthquakes that have occurred in past centuries. Here, we assess the seismic meaning of the main lineament domain in the tectonically active region of Central Italy. We describe the use of an automated analysis of satellite imagery coupled with spatial grid analysis to identify three lineament domains of the Central Apennines. Spatial and azimuthal comparisons of the main lineament domain (i.e., the Apennine Domain), with the known locations of earthquakes (moment magnitude of Mw > 5.5) that occurred during the past century, revealed the most seismically active tectonic areas and their spatial distributions. Further, we present a conceptual seismo-geodynamic model for the Central Apennines, which is characterized by regional arching and explains the presence of an extensional tectonic regime in the upper crustal layer of the active Apennines fold-and-thrust belt. Full article