Search Results (17)

The process of manufacturing drug delivery systems (DDSs) by fused deposition modeling (FDM) with 3D printing requires the availability of a polymeric filament containing the drug of interest. This filament is fused in the printer heating system and used to print polymer/drug volumetric parts. Polymers with pH-dependent solubility are widely known in the literature for their controlled release and drug dissolution-enhancing properties, biocompatibility, and variety of release profiles. Given these characteristics, the study of pH-responsive 3D printing filaments appears as a potential alternative for the development of new 3D printing functional materials for healthcare area applications. In this sense, this work aimed at the preparation and characterization of pH-dependent filaments of the Eudragit E 100 copolymer (E100) containing the model drug Amlodipine (Aml) for potential application in the manufacturing of DDSs by 3D printing. The E100/Aml filaments with two distinct drug concentrations were produced by hot-melt extrusion at 105 °C. The posterior chemical protonation treatment of the filaments for 60 min provided a significant improvement in their flexibility. Microstructural analysis (SEM, XRD, FTIR, and DLS) and thermal studies by DSC proved the feasibility of producing the filaments by hot-melt extrusion without the degradation of their constituent materials. The in vitro dissolution profiles of the E100/Aml samples were evaluated in simulated gastric and intestinal fluids. The facilitated solubility of the polymer in an acidic medium (pH = 1.2) was preserved in the filament form, with rapid and reproducible drug release from the polymer matrix. The saturation of the drug concentration in the medium occurred after 30 min of testing for E100/Aml models. A customized 3D part with geometry and fill control was also printed from E100/Aml filaments as proof of concept. Full article

In this work, we report the use of the hot melt extrusion method in harsh extrusion conditions, i.e., screw rotation speed of 250 rpm, temperature above 100 °C, and two mixing zones, in order to obtain an amorphous dispersion of an active pharmaceutical ingredient (API) that is sparingly soluble in water. As a polymer matrix Eudragit EPO (E-EPO) and as an API ibuprofen (IBU) were used in the research. In addition, the plasticizer Compritol 888 ATO (COM) was tested as a factor potentially improving processing parameters and modifying the IBU release profile. In studies, 25% by weight of IBU, 10% of COM and various extrusion temperatures, i.e., 90, 100, 120, 130, and 140 °C, were used. Hot melt extrusion (HME) temperatures were selected based on the glass transition temperature of the polymer matrix (T_g = 42 °C) and the melting points of IBU (T_m = 76 °C) and COM (T_m = 73 °C), which were tested by differential scanning calorimetry (DSC). The thermal stability of the tested compounds, determined on the basis of measurements carried out by thermogravimetric analysis (TGA), was also taken into account. HME resulted in amorphous E-EPO/IBU solid dispersions and solid dispersions containing a partially crystalline plasticizer in the case of E-EPO/IBU/COM extrudates. Interactions between the components of the extrudate were also studied using infrared spectroscopy (FTIR-ATR). The occurrence of such interactions in the studied system, which improve the stability of the obtained solid polymer dispersions, was confirmed. On the basis of DSC thermograms and XRPD diffractograms, it was found that amorphous solid dispersions were obtained. In addition, their stability was confirmed in accelerated conditions (40 °C, 75% RH) for 28 days and 3 months. The release profiles of prepared tablets showed the release of 40% to 63% of IBU from the tablets within 180 min in artificial gastric juice solution, with the best results obtained for tablets with E-EPO/IBU extrudate prepared at a processing temperature of 140 °C. Full article

Luliconazole is a broad-spectrum topical antifungal agent that acts by altering the synthesis of fungi cell membranes. Literature suggests that the recurrence of fungal infection can be avoided by altering the pH of the site of infection. Studies have also suggested that fungi thrive by altering skin pH to be slightly acidic, i.e., pH 3–5. The current study is aimed to design, develop, characterize, and evaluate an alkaline pH-based antifungal spray solution for antifungal effects. Luliconazole was used as an antifungal agent and an alkaline spray was formulated for topical application by using Eudragit RS 100, propylene glycol (PG), water, sodium bicarbonate, and ethanol via solubilization method. Herein, sodium bicarbonate was used as an alkalizing agent. Based on DSC, FTIR, PXRD, scanning electron microscopy (SEM), and rheological analysis outcomes, the drug (luliconazole) and polymer were found to be compatible. F-14 formulation containing 22% Eudragit RS 100 (ERS), 1.5% PG, and 0.25% sodium bicarbonate was optimized by adopting the quality by design approach by using design of experiment software. The viscosity, pH, drying time, volume of solution post spraying, and spray angle were, 14.99 ± 0.21 cp, 8 pH, 60 s, 0.25 mL ± 0.05 mL, and 80 ± 2, respectively. In vitro drug diffusion studies and in vitro antifungal trials against Candida albicans revealed 98.0 ± 0.2% drug diffusion with a zone of inhibition of 9 ± 0.12 mm. The findings of the optimized luliconazole topical film-forming solution were satisfactory, it was compatible with human skin, and depicted sustained drug release that suggests promising applicability in facilitated topical antifungal treatments. Full article

The aim of this research was the production of extrudates for the treatment of hypertension and heart failure and the investigation of the degradation of the peptidomimetic drug enalapril maleate (EM) during hot-melt extrusion (HME). A fast HPLC method was developed to quantify enalapril maleate and possible degradation products. Screening experiments revealed that the diketopiperazine derivative (Impurity D) was the main degradation product. Hot-melt extrusion of enalapril maleate with the polymer Soluplus^® enabled extrusion at 100 °C, whereas a formulation with the polymer Eudragit^® E PO could be extruded at only 70 °C. Extrusion at 70 °C prevented thermal degradation. A stabilizing molecular interaction between enalapril maleate and Eudragit^® E PO was identified via FT-IR spectroscopy. Dissolution studies were carried out to study the influence of the formulation on the dissolution behavior of enalapril maleate. These promising results can be transferred to other thermo-sensitive and peptidomimetic drugs to produce extrudates which can be used, for instance, as feedstock material for the production of patient-specific dosage forms via Fused Deposition Modeling (FDM) 3D printing. Full article

In this study, mucoactive self-emulsifying drug delivery systems (SEDDSs) based on sustained release of N-acetylcysteine (NAC) were developed for providing effective intestinal mucopermeation. Polymeric ionic complexes of NAC were formed with polyethyleneimine (PEI), Eudragit E 100, and Eudragit RS 100 and loaded into a novel SEDDS. The SEDDSs exhibited a stable average size of 75 ± 12 nm (polydispersity index (PDI) < 0.3) and showed a rise in the zeta potential from −17.31 mV to −7.72 mV. On Caco-2 cells, SEDDSs at 1–3% were non-cytotoxic. An average of 91.8 ± 5.4% NAC was released from SEDDSs containing Eudragit E 100 (p ≤ 0.05) and Eudragit RS 100 (p ≤ 0.001) complexes at a significantly slower rate within 80 min, whereas the SEDDS containing PEI released NAC in a matter of seconds. Similarly, the SEDDS complexes revealed a time-dependent reduction in mucus dynamic viscosity of 52.6 ± 19.9%. Consequently, as compared with a blank SEDDS, mucodiffusion revealed about 2- and 1.8-fold significantly greater mucopermeation of SEDDSs anchoring Eudragit E 100–NAC and RS 100–NAC complexes (p ≤ 0.05), respectively. The mucoactive SEDDSs, which steadily released NAC while permeating the mucus, were linked to a significantly increased mucopermeation in vitro as a result of optimal mucolytic targeting. Full article

The preparation of the metal surface before coating application is fundamental in determining the properties of the coatings, particularly the roughness, adhesion, and corrosion resistance. In this work, chitosan/Eudragit E 100 (chit/EE100) were fabricated by electrophoretic deposition (EPD) and both their microstructure and properties were investigated. The present research is aimed at characterizing the effects of the surface pretreatment of titanium substrate, applied deposition voltage, and time on physical, mechanical, and electrochemical properties of coatings. The coating’s microstructure, topography, thickness, wettability, adhesion, and corrosion behavior were examined. The applied process parameters influenced the morphology of the coatings, which affected their properties. Coatings with the best properties, i.e., uniformity, proper thickness and roughness, hydrophilicity, highest adhesion to the substrate, and corrosion resistance, were obtained after deposition of chit/EE100 coating on nanotubular oxide layers produced by previous electrochemical oxidation. Full article

Pharmacomagnetography involves the simultaneous assessment of solid dosage forms (SDFs) in the human gastrointestinal (GI) tract and the drug plasmatic concentration, using a biomagnetic technique and pharmacokinetics analysis. This multi-instrumental approach helps the evaluation, as GI variables can interfere with the drug delivery processes. This study aimed to employ pharmacomagnetography to evaluate the influence of omeprazole on the drug release and absorption of metronidazole administered orally in magnetic-coated tablets. Magnetic-coated tablets, coated with Eudragit^® E-100 (E100) and containing 100 mg of metronidazole, were produced. For the in vivo experiments, 12 volunteers participated in the two phases of the study (placebo and omeprazole) on different days to assess the bioavailability of metronidazole. The results indicated a shift as the pH of the solution increased and a delay in the dissolution of metronidazole, showing that the pH increase interferes with the release processes of tablets coated with E100. Our study reinforced the advantages of pharmacomagnetography as a tool to perform a multi-instrumental correlation analysis of the disintegration process and the bioavailability of drugs. Full article

Hot-melt extrusion (HME) has great advantages for the preparation of solid dispersion (SD), for instance, it does not require any organic solvents. Nevertheless, its application to high-melting-point and thermosensitive drugs has been rarely reported. In this study, thermally unstable curcumin (Cur) was used as a drug model. The HME process was systematically studied by adjusting the gradient temperature mode and residence time, with the content, crystallinity and dissolution of Cur as the investigated factors. The effects of barrel temperature, screw speed and cooling rate on HME were also examined. Solubility parameters and the Flory–Huggins method were used to evaluate the miscibility between Cur and carriers. Differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, equilibrium solubility and in vitro and in vivo experiments were used to characterize and evaluate the results. An amorphous Cur SD was successfully obtained, increasing the solubility and release of Cur. In the optimal process, the mass ratio of Cur to Eudragit^® E PO (EPO) was 1:4 and the barrel temperature was set at a gradient heating mode (130 °C–135 °C–140 °C–145 °C–150 °C–155 °C–160 °C) at 100 rpm. Related pharmacokinetic test results also showed the improved bioavailability of the drug in rats. In a pharmacodynamic analysis of Sprague–Dawley rats, the Cmax and the bioavailability of the Cur-EPO SD were 2.6 and 1.5 times higher than those of Cur, respectively. The preparation of the amorphous SD not only provided more solubility but also improved the bioavailability of Cur, which provides an effective way to improve the bioavailability of BCS II drugs. Full article

Currently, a significant problem is the production of coatings for titanium implants, which will be characterized by mechanical properties comparable to those of a human bone, high corrosion resistance, and low degradation rate in the body fluids. This paper aims to describe the properties of novel chitosan/Eudragit E 100 (chit/EE100) coatings deposited on titanium grade 2 substrate by the electrophoretic technique (EPD). The deposition was carried out for different parameters like the content of EE100, time of deposition, and applied voltage. The microstructure, surface roughness, chemical and phase composition, wettability, mechanical and electrochemical properties, and degradation rate at different pH were examined in comparison to chitosan coating without the addition of Eudragit E 100. The applied deposition parameters significantly influenced the morphology of the coatings. The chit/EE100 coating with the highest homogeneity was obtained for Eudragit content of 0.25 g, at 10 V, and for 1 min. Young’s modulus of this sample (24.77 ± 5.50 GPa) was most comparable to that of human cortical bone. The introduction of Eudragit E 100 into chitosan coatings significantly reduced their degradation rate in artificial saliva at neutral pH while maintaining high sensitivity to pH changes. The chit/EE100 coatings showed a slightly lower corrosion resistance compared to the chitosan coating, however, significantly exceeding the substrate corrosion resistance. All prepared coatings were characterized by hydrophilicity. Full article

A variety of neuroactive flavonoids can be found in the species of the Passiflora genus; however, their difficulty in crossing the blood–brain barrier limits their in vivo neuropharmacological activity. In this study, cationic nanoparticles were developed as a novel nanocarrier for improving the antidepressant activity of Passiflora edulis f. flavicarpa leaf extract. Formulations obtained using Eudragit E PO polymethylmethacrylate copolymer, as polymeric matrix had their physicochemical properties investigated. The analytical content of the flavonoids vicenin-2, orientin, isoorientin, vitexin, and isovitexin was determined in the plant extract. Small-sized and spherical nanoparticles loaded with Passiflora edulis f. flavicarpa were obtained with positive zeta potential and high encapsulation efficiency. In addition, the nanosystems were shown to be stable for at least 6 months. The antidepressant activity of P. edulis extract (50 and 100 mg/kg) as well as the extract-loaded nanoparticles (5 mg/kg) were investigated in mice using the forced swimming test, where the latter increased the potency of the former by 10-fold. In addition, histopathological and biochemical analysis confirmed the biocompatibility of the extract-loaded nanoparticles. This study demonstrated that the Eudragit cationic nanoparticles were able to improve the antidepressant activity of P. edulis in the central nervous system of mice. Full article

The development of advanced probiotic delivery systems, which preserve bacteria from degradation of the gastrointestinal tract and achieve a targeted release mediated by pH-independent swelling, is of great interest to improve the efficient delivery of probiotic bacteria to the target tissue. Gram-positive and Gram-negative bacteria models (Lactobacillus acidophilus (Moro) Hansen and Mocquot (ATCC® 4356™) and Escherichia coli S17, respectively) have been successfully encapsulated for the first time in pH-independent microparticulate polymethacrylates (i.e., Eudraguard biotic) used for the targeted delivery of nutraceuticals to the colon. These bacteria have also been encapsulated within the mucoadhesive polymethacrylate Eudragit RS 100 widely used as targeted release formulation for active pharmaceutical ingredients. The enteric microparticles remained unaltered under simulated gastric conditions and released the contained viable microbial cargo under simulated intestinal conditions. Buoyancies of 90.2% and 57.3% for Eudragit and Eudraguard microparticles, respectively, and long-term stability (5 months) for the encapsulated microorganisms were found. Cytotoxicity of the microparticles formulated with both polymers was evaluated (0.5–20 mg/mL) on Caco-2 cells, showing high cytocompatibility. These results underline the suitability of the synthesized materials for the successful delivery of probiotic formulations to the target organ, highlighting for the first time the potential use of Eudraguard biotic as an effective enteric coating for the targeted delivery of probiotics. Full article

A scalable low-shear membrane emulsification process was used to produce microencapsulated Escherichia coli-phages in a solid oral dosage form. Uniform pH-responsive composite microparticles (mean size ~100 µm) composed of Eudragit^® S100 and alginate were produced. The internal microstructure of the gelled microcapsules was studied using ion-milling and imaging, which showed that the microparticles had a solid internal core. The microencapsulation process significantly protected phages upon prolonged exposure to a simulated gastric acidic environment. Encapsulated phages that had been pre-exposed to simulated gastric acid were added to actively growing bacterial cells using in vitro cell cultures and were found to be effective in killing E. coli. Encapsulated phages were also shown to be effective in killing actively growing E. coli in the presence of human epithelial cells. Confocal microscopy images showed that the morphology of encapsulated phage-treated epithelial cells was considerably better than controls without phage treatment. The encapsulated phages were stable during refrigerated storage over a four-week period. The process of membrane emulsification is highly scalable and is a promising route to produce industrial quantities of pH-responsive oral solid dosage forms suitable for delivering high titres of viable phages to the gastrointestinal tract. Full article

In the last few years, essential oils (EOs) derived from plants have aroused great interest due to their well-known antimicrobial activity. Unfortunately, they present several limitations in their use, such as photosensitivity, temperature sensitivity, high volatility, and poor water solubility. The encapsulation technique represents a good solution to these problems and ensures protection of the functional properties of essential oils. In this work, bergamot essential oil (BEO) and sweet orange essential oil (OEO) loaded-Eudragit^® RS 100 (EuRS100) nanoparticles (NPs) were prepared by using the nanoprecipitation technique. We obtained nanoparticles characterized by a mean diameter of 57 to 208 nm and a positive surface charge (39 to 74 mV). The antibacterial activity of the obtained systems against Escherichia coli was in vitro investigated. We demonstrated that both orange and bergamot essential oils were successfully encapsulated and our nanoparticles have good antibacterial activity. Finally, in order to evaluate the potential applicability of OEONps to prolong fresh orange juice shelf-life, survival of E. coli during a storage period of one week at 25 °C was investigated: Orange essential oil-loaded nanoparticles (OEONPs) have been able to prolong the orange juice shelf life. Full article

The commercial copolymers Eudragit^® E 100 and Eudragit^® PO are widely used materials in the pharmaceutical field as coating systems. Such materials derived from amino-methacrylate groups under acidulated conditions may acquire an ionisable fraction or undergo hydrolytic degradation of the polymeric structure. This work focused on establishing the chemical, physical, and surface changes of two reprocessed polymeric materials, here named as EuCl-E-100 and EuCl-E-PO, which were obtained from the commercial Eudragit^® E 100 and Eudragit^® E PO, respectively. The commercial materials were exposed to extreme acid conditions, where the polymers were solubilised and subsequently dried by the refractance window method. The materials obtained were chemically characterised by potentiometric titration, nuclear magnetic resonance spectroscopy (¹H NMR and ¹³C NMR) in one and two dimensions (COSY, HSQC, and HMBC), infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry. Changes in the physical properties of the materials were evaluated through studies of flowability, compactability, and their ability to gain and lose humidity. Surface thermodynamic studies were carried out through contact angle measurements using the sessile drop method. The results showed that the processed polymeric materials acquired a substantial degree of ionisation without undergoing hydrolysis of the esterified groups. Furthermore, such changes improved the flow characteristics of the material and the solubility in aqueous media at pH > 5, while also maintaining the hydrophobicity degree of the polymeric surface. Full article

Topical monotherapy of nail infection is limited by poor drug permeability into the human nail plate. Numerous substances and methods are applied to improve the antifungal agent delivery across the nail plate. This work aimed to evaluate the effect of chemical and physical enhancers on the accumulation and permeation of amorolfine hydrochloride through human nail clippings. Polymeric nail lacquers with Eudragit E100 were developed as a potentially suitable delivery system for amorolfine hydrochloride. Incorporating thioglycolic acid and urea into formulations provided increased accumulation of antifungal agent in nail layers of up to 100% and 57%, respectively. Structural changes of nail barrier, induced by fractional CO₂ laser, were visualized by microscopy. The permeation of amorolfine hydrochloride through the nail increased twofold when thioglycolic acid-containing formulation was applied and the nail was pretreated with a fractional CO₂ laser. The results suggest that this novel combination of enhancers has the potential to be an effective option for topical drug delivery through the nail, and increased the efficacy of treatment. Full article