Search Results (9)

Background: This study aimed to analyze and compare the translucency and marginal adaptation of five resin-based materials used as occlusal sealants, both before and after simultaneous fatigue and thermocycling. Two null hypotheses were tested: (1) All tested materials allow the transillumination of sealed occlusal carious lesions. (2) There are no differences in marginal adaptation before and after simultaneous fatigue and thermocycling. Methods: Forty extracted human molars with early occlusal caries lesions were randomly divided into five equal groups. Near-infrared transillumination images of cleaned occlusal surfaces were captured before and after applying the following sealants: (I) OptiBond FL (adhesive alone), (II) OptiBond FL (primer and adhesive) (Kerr Corp., Brea, CA, USA), (III) Scotchbond Universal (3M, St. Paul, MN, USA) combined with OptiBond FL adhesive, (IV) Fissurit (VOCO GmbH, Cuxhaven, Germany), (V) Helioseal Clear (Ivoclar Vivadent AG, Schaan, Liechtenstein). A scanning electron microscope was used to assess marginal adaptation before and after simultaneous fatigue and thermocycling. The percentages of continuous margins (CMs) were quantified before and after the fatigue test and statistically compared (Shapiro–Wilk Normality test, two-way ANOVA with Fisher’s post hoc test). Results: Helioseal Clear and Fissurit were fully transparent under near-infrared transillumination. The percentage of closed margins significantly decreased after loading in one group: OptiBond FL primer application before adhesive application significantly reduced marginal adaptation. Conclusion: OptiBond FL (adhesive), Scotchbond Universal with OptiBond FL (adhesive), Fissurit, and Helioseal Clear provided excellent marginal adaptation. However, using OptiBond FL primer on enamel negatively impacted adaptation. Helioseal Clear and Fissurit, as transparent sealants, may allow lesion monitoring using an 850 nm transillumination camera. Full article

The aim of this randomized clinical trial was to evaluate the efficacy of two different remineralising toothpastes in preventing dental caries and promoting oral health. Patients aged 6–18 years old with healthy and fully erupted first permanent molars (C1 and C2 DIAGNOdent scores) were enrolled and randomized into two groups according to the home-hydroxyapatite-based remineralising treatment used: the Trial group used zinc carbonate hydroxyapatite-based treatment (Biorepair Total Protective Repair), while the Control group used magnesium strontium carbonate hydroxyapatite conjugated with chitosan toothpaste (Curasept Biosmalto Caries Abrasion & Erosion). Dental and periodontal parameters were measured over a six-month period, including the DIAGNOdent Pen Index (primary outcome), BEWE Index, Plaque Index, Bleeding Score, Schiff Air Index, and ICDAS assessed with DIAGNOcam. A total of 40 patients were equally allocated in the two groups and finally analyzed. A significant reduction in the DIAGNOdent Pen score was reported in the Trial group after 1 month of treatment, while in the Control group, no significant change was found. The Trial group also showed a significant reduction in plaque levels after 3 months of treatment, while in the Control group, it occurred after 1 month. However, the Bleeding Score and Schiff Air Index showed no significant differences between the groups, suggesting that additional measures may be required to address gingival inflammation and hypersensitivity. The ICDAS index also showed no statistically significant changes, due to the limited duration of this study. Overall, zinc-hydroxyapatite-based toothpaste was more effective than magnesium strontium carbonate hydroxyapatite toothpaste in enhancing enamel remineralisation in the short-term period. The assigned treatments did not result in significant improvements in the oral indexes assessed in this study. Full article

Technological improvements have introduced significant innovations in dentistry and broadened the array of tools and techniques in dental care. One technological development that has been widely researched over the past 20 years is the use of Near-Infrared Transillumination (NIRT) imaging for the diagnosis of dental caries. This paper aims to introduce a comprehensive collection of NIRT images, intended as a reference tool for routine dental examinations, dental research, pedagogical activities, and forensic odontology. The collection presents pairwise clinical and NIRT images categorized as follows: (a) healthy teeth, (b) carious teeth, (c) restored teeth, (d) enamel defects, and (e) diverse findings. This atlas could be a valuable tool for the dental community as it is designed as an identification guide of NIRT illustrated dental features. Full article

Poor oral health is an important concern for athletes, as it can affect both general health and athletic performance. The aim of this study is to investigate the effects of activity in chlorinated water on oral health in elite swimmers compared to non-swimming athletes. This cross-sectional study included 101 swimmers and 100 other athletes aged 13–26 years with a minimum training intensity of five hours per week (for at least the preceding two years). Oral health was assessed using the approximal plaque index (API) and the decayed/missing/filled teeth (DMFT) index. A DIAGNOcam was used to detect caries. Results show that swimmers were younger (15 years vs. 18 years), were more likely to be female (54% vs. 17%), and had a lower body mass index (20.1 kg/m² vs. 21.9 kg/m²) and a lower juice consumption (9% vs. 24%). Non-swimmers had significantly more decayed, missing, or filled teeth due to caries and plaque. In conclusion, by comparing elite swimmers and athletes competing in different sports, we have shown that competitive swimmers have a lower incidence of dental caries and plaque. Further research is needed to test our findings and to understand this relationship in greater detail. Full article

Background: The aim of this clinical study was to compare the occlusal caries detection (OCD) performance of the intraoral scanners (IOSs) Trios 4 (TIO, 3Shape) and Emerald S (EME, Planmeca) and the Diagnocam (DIA, KaVo) with the established visual (WHO) examination (VIS, reference method). Methods: Between 08/2022 and 02/2023, 60 children (mean age 9.6 ± 2.5 years) were examined as part of their regular dental checkups. OCD was performed at the tooth level, separately for primary and permanent unrestored teeth. Furthermore, two thresholds were analyzed: sound versus overall caries (pooled data of enamel and dentin caries, TH1) and pooled data of sound and enamel caries versus dentin caries (TH2). Results: The best agreement with the reference method (reliability) in both dentitions was obtained for DIA (ĸ = 0.829/ĸ = 0.846; primary/permanent teeth), followed by EME (ĸ = 0.827/ĸ = 0.837) and TIO (ĸ = 0.714/ĸ = 0.680). Similar results were shown for the diagnostic quality (sensitivity, specificity and area under the curve of the receiver operating characteristic curve), with higher values for TH1 than for TH2. Both IOSs and the DIA showed worse results than the reference method VIS. Conclusions: Currently, IOS should be used as an additional caries detection tool, especially for visualization, and cannot be recommended as a basic tool for diagnosis or invasive/noninvasive therapy decisions in OCD. Full article

The aim of this study was to assess the reliability of three diagnostic methods (near-infrared transillumination (NIRT), bitewing radiographs (BW), and clinical images (CI)) to detect occlusal carious lesions in a low caries risk population. This retrospective analysis included one hundred and eighty-eight occlusal surfaces, scored as sound surface, early lesion, or distinct lesion. We evaluated the agreement between and within the methods over time. Kappa statistics tested the correlation between the methods. Examiners detected occlusal early lesions more frequently with visual examination and NIRT and the same lesions were confirmed on the 2-year follow-up. Within the limitations of this study, we were able to establish that early occlusal lesions can be detected and monitored over time using NIRT and visual exam, while BW scores showed mostly sound surfaces at both examinations. NIRT combined with clinical examination can be considered appropriate to detect and monitor early enamel caries on the occlusal surface in low caries-risk populations. Full article

The aim of this in vitro study was to systematically investigate new caries diagnostic tools, including three intraoral scanners, and compare them to established diagnostic methods. For a standardized analysis of occlusal and proximal caries lesions, human permanent and primary teeth (n = 64) were embedded in models and investigated in a phantom head using six different caries diagnostic methods: visual examination, bitewing radiography, Diagnocam (KaVo, Biberach, Germany), Trios 4 (3Shape, Copenhagen, Denmark), iTero Element 5D (Align Technology, San José, CA, USA), and Planmeca Emerald S (Planmeca, Helsinki, Finland). The diagnostic methods were investigated and compared to reference µ-CT for permanent and primary teeth separately. For occlusal caries diagnostics in permanent teeth, the best agreement to the reference (reliability) was obtained for Planmeca Emerald S (ĸ = 0.700), whereas in primary teeth, for visual examination (ĸ = 0.927), followed by Trios 4 (ĸ = 0.579). Regarding proximal caries diagnostics, bitewing radiography, as the gold standard, exhibited the highest agreement for permanent (ĸ = 0.643) and primary teeth (ĸ = 0.871). Concerning the analysis of the diagnostic quality (sensitivity and specificity) using receiver operating characteristic (ROC) curve analysis, comparable findings were obtained for area under curve (AUC) values as for reliability. No diagnostic method could be identified that is generally suitable for occlusal and proximal lesions in both dentitions. Overall, caries diagnostics with intraoral scanners seem to be interesting tools that should be further investigated in clinical studies. Full article

Purposes: this clinical study evaluated the accuracy and execution time of a digital imaging fiber-optic transillumination (DIFOTI) technique for the detection of approximal caries in posterior teeth compared to intra-oral examination associated with bitewing radiographs. Methods: one hundred patients were selected and submitted to clinical inspection and bitewing radiographs. The outcomes of this process were converted into scores, according to the International Caries Detection and Assessment System (ICDAS): 0—sound tooth; 1, 2, and 3—carious lesion confined within enamel; 4, 5, and 6—dentin carious lesion. Subsequently, an independent investigator acquired digital images of the same teeth using a DIFOTI device (DIAGNOcam, Kavo Dental), which were also converted into ICDAS scores. The time required for executing diagnostic procedures was measured. The clinical sensitivity and specificity of DIFOTI were analyzed by receiver operating characteristic (ROC) curves. The time necessary to perform the diagnostic methods was evaluated by Mann–Whitney U (alfa = 0.05). Results: the overall test accuracy for the DIFOTI-based device ranged from 0.717 to 0.815 (area under the ROC curve) with p < 0.0001 for all ICDAS scores. Bitewing radiographs took almost twice the time required by DIFOTI (p < 0.001). Conclusions: the DIFOTI-based device DIAGNOcam provided accurate detection of approximal caries in posterior teeth, even at early stages. The technique employed for transillumination caries diagnosis by the same device took less time than conventional bitewing radiographs. Clinical Relevance: transillumination devices, such as DIAGNOcam, can be accurately used for caries diagnosis in approximal surfaces of posterior teeth, demanding less clinical time and without radiation-related risks. Full article

Objectives: The present study aimed to train deep convolutional neural networks (CNNs) to detect caries lesions on Near-Infrared Light Transillumination (NILT) imagery obtained either in vitro or in vivo and to assess the models’ generalizability. Methods: In vitro, 226 extracted posterior permanent human teeth were mounted in a diagnostic model in a dummy head. Then, NILT images were generated (DIAGNOcam, KaVo, Biberach), and images were segmented tooth-wise. In vivo, 1319 teeth from 56 patients were obtained and segmented similarly. Proximal caries lesions were annotated pixel-wise by three experienced dentists, reviewed by a fourth dentist, and then transformed into binary labels. We trained ResNet classification models on both in vivo and in vitro datasets and used 10-fold cross-validation for estimating the performance and generalizability of the models. We used GradCAM to increase explainability. Results: The tooth-level prevalence of caries lesions was 41% in vitro and 49% in vivo, respectively. Models trained and tested on in vivo data performed significantly better (mean ± SD accuracy: 0.78 ± 0.04) than those trained and tested on in vitro data (accuracy: 0.64 ± 0.15; p < 0.05). When tested in vitro, the models trained in vivo showed significantly lower accuracy (0.70 ± 0.01; p < 0.01). Similarly, when tested in vivo, models trained in vitro showed significantly lower accuracy (0.61 ± 0.04; p < 0.05). In both cases, this was due to decreases in sensitivity (by −27% for models trained in vivo and −10% for models trained in vitro). Conclusions: Using in vitro setups for generating NILT imagery and training CNNs comes with low accuracy and generalizability. Clinical significance: Studies employing in vitro imagery for developing deep learning models should be critically appraised for their generalizability. Applicable deep learning models for assessing NILT imagery should be trained on in vivo data. Full article