Search Results (10)

This study presents numerical analyses of the thermal, metallurgical, and mechanical processes involved in welding. The temperature fields were computed by solving the transient heat transfer equation using the ABAQUS/Standard 2024 finite element solver. Two types of moving heat sources were applied: a surface Gaussian distribution and a volumetric model, both implemented via DFLUX subroutines to simulate welding on butt-jointed plates. The simulation accounted for key welding parameters, including current, voltage, welding speed, and plate dimensions. The thermophysical properties of the INC 738 LC nickel superalloy were used in the model. Solidification characteristics, such as dendritic arm spacing, were estimated based on cooling rates around the weld pool. The model also calculated transverse residual stresses and applied a hot cracking criterion to identify regions vulnerable to cracking. The peak transverse stress, recorded in the heat-affected zone (HAZ), reached 1.1 GPa under Goldak’s heat input model. Additionally, distortions in the welded plates were evaluated for both heat source configurations. Full article

Defining an accurate friction model without having the mesh distortion in an optimized computational time has always been a significant challenge for modelling solid-state natural processes. The presented paper proposes an Eulerian frictional-based solid static model for the accurate modeling of sliding and sticking conditions for the friction stir additive manufacturing process (FSAM). For the frictional behavior, a modified friction model is proposed to investigate the sliding and sticking conditions during the process. The magnesium alloy is selected as the workpiece material and AZ31B-F is employed as the filler material. Two different subroutines, Dflux and Sfilm, are used in order to simulate the heat flux during the process. The convection and emission during the process are determined using the Goldak double ellipsoidal model. DC3D8 and C3D8R elements are employed as the thermal and mechanical models, respectively. The results indicated that the temperature sharply increased up to 870 °C in the first and the second layers. After that, the increasing rate becomes slower with a maxim temperature of 1310 °C. A linear cooling behavior is obtained at the cooling step. The stress results indicated that the tool and the filler material pressure play a significant role in increasing the stress at the center of the workpiece. On the sides of the workpiece, a peak stress is also obtained due to the clamping force. At the cooling phase for the center of the workpiece, the longitudinal residual stress of 5 MP and transverse residual stress of 7 MPa (compression) are achieved. The distortion of the workpiece is also investigated and a maximum value of 0.13 mm is obtained. To wrap up, it should be noted that by implementing an accurate sliding/sticking condition in a frictional based model, a more comprehensive investigation about frictional interactions and their influence on thermal and mechanical behavior can be carried out. Full article

This study investigates the Inconel 718 alloy coated with NiCrBSi powder using the ABAQUS software. An accurate conical heat source model is constructed based on the three-dimensional Fourier heat conduction law. The heat source subroutine Dflux.for is successfully integrated to achieve a highly realistic simulation of the welding heat source. Using this model, the analysis focuses on the temperature distribution in electron beam melting. Furthermore, the accuracy and reliability of the simulation are validated through actual coating experiments. By examining the impact of various procedural factors on the temperature distribution, it is found that optimal coating results and a tightly formed elliptical molten zone are attained at an electron beam current of 18 mA, and the scanning speed is 300 mm/min. The peak temperature in the melt pool in the coating area is 5087 K, while the lowest temperature on the isothermal in the heat-affected zone is 1409 K. Over time, there is a swift rise in temperature for the data points taken along both the X and Z trajectories, followed by rapid cooling after rapid heating. Coating experiments conducted under the optimal parameters demonstrate a dense coating layer and good bonding with the substrate, thereby validating the accuracy of the simulation. Full article

This paper investigates the distribution of the sunshine temperature field in bridge structures. To implement thermodynamic boundary conditions on the structure under the influence of sunshine, this study utilized the FILM and DFLUX subroutines provided by ABAQUS. Based on this method, the sunshine temperature field of the concrete box girder of a cable-stayed bridge was analyzed. The results showed that the simulated temperature values were in good agreement with the measured values. The temperature difference between the internal and external surfaces of the box girder under the influence of sunshine was significant, with the maximum negative temperature difference appearing around 6:00 a.m. and the maximum positive temperature difference appearing around 2:00 p.m. The temperature gradient of the box girder section calculated by the method presented a C-shaped distribution pattern, which differs from the double-line distribution pattern specified in the current “General Specifications for Design of Highway Bridges and Culverts” in China (JTG D60-2015). Furthermore, a sensitivity analysis of thermal parameters using the proposed simulation method for the sunshine temperature field of the concrete box girder was conducted, and the results indicated that the solar radiation absorption coefficient had a significant impact on the temperature field. A 30% increase or decrease in the solar radiation absorption coefficient caused the maximum temperature change on the surface of the structure to exceed 10 °C. This paper provides an accurate simulation of the sunshine temperature field of the concrete box girder of a cable-stayed bridge, and the research results are significant for controlling bridge alignment and stress state during the construction period, ensuring the reasonable initial operating state of the bridge, and enhancing the sustainability of the structure. Full article

This paper forms a set of three-dimensional temperature field simulation methods considering the influence of sunshine shadow based on the DFLUX subroutine and FILM subroutine interface provided by the Abaqus platform to simulate the three-dimensional temperature field of concrete bridge towers and study its distribution law. The results show that the method has high accuracy for shadow recognition and temperature field calculation. The maximum difference between the shadow recognition results and the theoretical calculation value was only 19.1 mm, and the maximum difference between the simulated temperature and the measured temperature was 3.3 °C. The results of analyzing the temperature field of the concrete bridge tower using this algorithm show that the temperature difference between the opposite external surface of the tower column can reach 11.6 °C, which is significantly greater than the recommended temperature difference value of 5 °C in the specifications. For the concrete bridge tower, in the thickness direction of the tower wall, the temperature change was obvious only at a range of 0.3 m from the external surface of the tower wall, and the temperature change in the remaining range was small. In addition, the temperature gradient distribution of the sunshine temperature field in the direction of wall thickness conformed to the exponential function T(x) = T₀e^−αx + C. Additionally, the data fitting results indicate that using the temperature data at a distance of 0.8 m from the external surface as the calculation parameter in the function can achieve the ideal fitting result. Full article

The paper presents a numerical model based on the finite element method (FEM) to predict deformations and residual stresses in socket welding of different diameter stainless steel pipes made of X5CrNi18-10 steel. The next part of the paper concerns the determination of strength properties of a welded joint in terms of a shear test. A thermo-elastic–plastic numerical model is developed using Abaqus FEA software in order to determine the thermal and mechanical phenomena of the welded joint. This approach requires the implementation of moveable heat source power intensity distribution based on circumferentially moving Goldak’s heat source model. This model is implemented in the additional DFLUX subroutine, written in Fortran programming language. The correctness of the assumed model of thermal phenomena is confirmed by examinations of the shape and size of the melted zone. The strength of the welded joint subjected to shear is verified by performing a compression test of welded pipes as well as computer simulations with validation of the computational model using the Dantec 3D image correlation system. Full article

This study involves the validating of thermal analysis during TIG Arc welding of 1.4418 steel using finite element analyses (FEA) with experimental approaches. 3D heat transfer simulation of 1.4418 stainless steel TIG arc welding is implemented using ABAQUS software (6.14, ABAQUS Inc., Johnston, RI, USA), based on non-uniform Goldak’s Gaussian heat flux distribution, using additional DFLUX subroutine written in the FORTRAN (Formula Translation). The influences of the arc current and welding speed on the heat flux density, weld bead geometry, and temperature distribution at the transverse direction are analyzed by response surface methodology (RSM). Validating numerical simulation with experimental dimensions of weld bead geometry consists of width and depth of penetration with an average of 10% deviation has been performed. Results reveal that the suggested numerical model would be appropriate for the TIG arc welding process. According to the results, as the welding speed increases, the residence time of arc shortens correspondingly, bead width and depth of penetration decrease subsequently, whilst simultaneously, the current has the reverse effect. Finally, multi-objective optimization of the process is applied by Derringer’s desirability technique to achieve the proper weld. The optimum condition is obtained with 2.7 mm/s scanning speed and 120 A current to achieve full penetration weld with minimum fusion zone (FZ) and heat-affected zone (HAZ) width. Full article

The performance and service life of the nuclear emergency diesel engine shaft made of 12CrNi2 alloy steel is very important for the safety of nuclear power. Laser melting deposition (LMD) is a challenging camshaft-forming technology due to its high precision, rapid prototyping, and excellent parts performance. However, LMD is an unsteady process under the local action of laser, especially for curved surface forming, which is more likely to generate large residual stress on components, resulting in cracks and other defects. At present, the stress research on LMD curved surface forming is relatively insufficient. In the present paper, material parameter testing, high-temperature mechanical properties analysis, single-track sample preparation, and heat source checks are conducted. At the same time, the ABAQUS software and the DFLUX heat source subroutine are used to compile the curved double-ellipsoidal moving heat source, and the effects of the temperature-dependent thermophysical parameters and phase change latent heat on the temperature field are considered. A three-dimensional finite element model is established to analyze the thermal stress evolution and residual stress distribution of multi-track multi-layer on a curved surface by LMD, and the effect of the scanning method and interlayer cooling time on the residual stress of the formed components is studied. The results show that with the increase in temperature, the strength of the material reduces, and the fracture morphology of the material gradually transitions from ductile fracture to creep fracture. The material parameters provide a guarantee for the simulation, and the errors of the width and depth of the melt pool are 4% and 9.6%, respectively. The simulation and experiment fit well. After cooling, the maximum equivalent stress is 686 MPa, which appears at the junction of the substrate and the deposited layer. The larger residual stress is mainly concentrated in the lower part of the deposited layer, where the maximum circumferential stress and axial stress are the tensile stress. Compared with the axial parallel lap scanning method, the arc copying lap scanning method has a relatively smaller maximum thermal stress and residual stress after cooling. The residual stress in the deposited layer is increased to some extent with the increase in the interlayer cooling time. Full article

Finite element (FE) analysis of welding residual stress and deformation is one of the essential stages in the manufacturing process of mechanical structures and parts. It aids in reducing the production cost, minimizing errors, and optimizing the manufactured component. This paper presents a numerical prediction of residual stress and deformation induced by two-pass TIG welding of Al 2219 plates. The FE model was developed using ABAQUS and FORTRAN packages, Goldak’s heat source model was implemented by coding the nonuniform distributed flux (DFLUX) in user subroutine to represent the ellipsoidal moving weld torch, having front and rear power density distribution. Radiation and convection heat losses were taken into account. The mechanical boundary condition was applied to prevent the model from rotation and displacement in all directions while allowing material deformation. The FE model was experimentally validated and the compared results show good agreement with average variations of 18.8% and 17.4% in residual stresses and deformation, respectively. Full article

Surface cracking seriously affects the quality of beam blanks, a relatively new blank in the continuous casting in China. In order to study the mechanism of the initiation and propagation of surface cracks, this study established a 2D micro-segmented model of the solidification process for a beam blank in the mold, with a user subroutine DFLUX written in Fortran. Using a contact algorithm, the stress in the shell of the beam was analyzed considering the mechanical properties of the material (Q235B), thermal stress, surface friction force and ferrostatic pressure. The results showed that at the center of the web, surface longitudinal cracks were most likely to initiate at a height of 180 mm from the meniscus; at the fillet, surface longitudinal cracks were most likely to initiate at a height of 200 mm from the meniscus. Moreover, the casting speed showed a greater effect on surface crack initiation than the pouring temperature did. This study reveals the cause of longitudinal crack initiation, and the most likely positions of cracks on the strand. Thus, it is instructive for controlling surface cracks in production. Full article