Search Results (9)

A variety of variables, such as organic matter input, redox conditions, depositional rates, and terrigenous input, affect the deposition of black shale. Furthermore, because of the significant regional variations in paleodepositional environments, these factors have a complex role in organic matter enrichment. Global geological events influenced sedimentary conditions, organic enrichment, and the development of organic-enriched shales during the Late Ordovician to Early Silurian. The Wufeng–Longmaxi Formation black shales in Southeastern Chongqing were analyzed for X-ray diffraction (XRD), major and trace element geochemistry, and total organic carbon (TOC) data; this led to further analysis of the relationship between the depositional environment and organic matter aggregation and rock type evolution. The primary minerals found in the Wufeng–Longmaxi shale are quartz, feldspar, carbonatite (calcite and dolomite), and clay. The high index of compositional variability (ICV) values (>1) and the comparatively low chemical index of alteration (CIA) values (52.6–72.8) suggest that the sediment source rocks are juvenile and are probably experiencing weak to moderate chemical weathering. The selected samples all show negative Eu anomalies, flat heavy rare earth elements, and mildly enriched light rare earth elements. The ratios of La/Th, La/Sc, Th/Sc, ΣREE-La/Yb, TiO₂-Ni, and La/Th-Hf suggest that acidic igneous rocks were the main source of sediment, with minor inputs from ancient sedimentary rocks. The correlations of paleoclimate proxies (Sr/Cu, CIA), redox proxies (V/Cr, V/Ni, V/(V + Ni), Ni/Co, U/Th), paleoproductivity proxies (Ba_xs, Cu_EF, Ni_EF), and water mass restriction proxies (Mo/TOC, U_EF, Mo_EF) suggest a humid–semiarid, anoxic, moderate–high paleoproductivity, and moderate–strongly restricted environment. On the basis of the aforementioned interpretations, the paleoenvironment of the Wufeng–Longmaxi Formations was established, with paleoredox conditions and restricted water masses likely being the primary factors contributing to organic matter enrichment. Full article

In recent years, the development of environmentally friendly, lead-free ferroelectric films with prominent electrostrictive effects have been a key area of focus due to their potential applications in micro-actuators, sensors, and transducers for advanced microelectromechanical systems (MEMS). This work investigated the enhanced electrostrictive effect in lead-free sodium bismuth titanate-based relaxor ferroelectric films. The films, composed of (Bi_0.5Na_0.5)_0.8−xBa_xSr_0.2TiO₃ (BNBST, x = 0.02, 0.06, and 0.11), with thickness around 1 μm, were prepared using a sol-gel method on Pt/TiO₂/SiO₂/Si substrates. By varying the Ba²⁺ content, the crystal structure, morphology, and electrical properties, including dielectric, ferroelectric, strain, and electromechanical performance, were investigated. The films exhibited a single pseudocubic structure without preferred orientation. A remarkable strain response (S > 0.24%) was obtained in the films (x = 0.02, 0.06) with the coexistence of nonergodic and ergodic relaxor phases. Further, in the x = 0.11 thick films with an ergodic relaxor state, an ultrahigh electrostrictive coefficient Q of 0.32 m⁴/C² was achieved. These findings highlight the potential of BNBST films as high-performance, environmentally friendly electrostrictive films for advanced microelectromechanical systems (MEMS) and electronic devices. Full article

In the present paper, composite thin films of barium strontium titanate (Ba_xSr_1−xTiO₃) with an acceptor modifier (magnesium oxide—MgO) were deposited on metal substrates (stainless steel type) using the sol–gel method. The composite thin films feature Ba_xSr_1−xTiO₃ ferroelectric solid solution as the matrix and MgO linear dielectric as the reinforcement, with MgO concentrations ranging from 1 to 5 mol%. Following thermal treatment at 650 °C, the films were analyzed for their impedance response. Experimental impedance spectra were modeled using the Kohlrausch–Williams–Watts function, revealing stretching parameters (β) in the range of approximately 0.78 to 0.89 and 0.56 to 0.90 for impedance and electric modulus formalisms, respectively. Notably, films modified with 3 mol% MgO exhibited the least stretched relaxation function. Employing the electric equivalent circuit method for data analysis, the “circle fit” analysis demonstrated an increase in capacitance from 2.97 × 10⁻¹² F to 5.78 × 10⁻¹⁰ F with the incorporation of 3 mol% MgO into BST-based thin films. Further analysis based on Voigt, Maxwell, and ladder circuits revealed trends in resistance and capacitance components with varying MgO contents, suggesting non-Debye-type relaxation phenomena across all tested samples. Full article

Multilayer ceramic capacitors (MLCCs) prepared using Ba_1−xSr_xTiO₃ (BST) ceramics exhibit high dielectric constants (~1000), low dielectric loss (<0.01), and high breakdown voltage, with particularly significant tunability in dielectric properties (>50%) and with poor temperature stability. Doping-dominated temperature stability improvements often result in unintended loss of dielectric properties. A non-doping method has been proposed to enhance the temperature stability of BST capacitors. The composite gradient multilayer (CGML) ceramic capacitors with Ba_xSr_1−xTiO₃, where 0.5 < x < 0.8, as the dielectric, were prepared using a tape-casting method and sintered at 1250 °C. There exists a dense microstructure and continuous interface between the Ba_xSr_1−xTiO₃ thick film and the Pt electrodes. CGML ceramic capacitors feature a high dielectric constant at 1270, a low dielectric loss of less than 0.007, and excellent frequency and temperature stability. The capacitor showcases remarkable dielectric properties with a substantial tunability of 68% at 100 kV/cm, along with a notably consistent tunability ranging from 20% to 28% at 15 kV/cm across temperatures spanning from 30 to 100 °C, outperforming single-component BST-MLCCs in dielectric performance. Full article

The aim of this work is to predict suitable chemical compositions for the development of new ceramic oxygen gas separation membranes, avoiding doping with toxic cobalt or expensive rare earths. For this purpose, we have chosen the system Sr_1−xBa_x(Ti_1−y−zV_yFe_z)O_3−δ (cubic perovskite-type phases). We have evaluated available experimental data, determined missing crystallographic information using bond-valence modeling and programmed a Python code to be able to generate training data sets for property predictions using machine learning. Indeed, suitable compositions of cubic perovskite-type phases can be predicted in this way, allowing for larger electronic conductivities of up to σ_e = 1.6 S/cm and oxygen conductivities of up to σ_i = 0.008 S/cm at T = 1173 K and an oxygen partial pressure p_O2 = 10⁻¹⁵ bar, thus enabling practical applications. Full article

Ferroelectric samples Sr_1−xBa_xTiO₃ (BST), where x = 0, 0.2, 0.4, 0.6, 0.8 and 1, were prepared using the tartrate precursor method and annealed at 1200 °C for 2 h. X-ray diffraction, “XRD”, pattern analysis verified the structure phase. The crystallite size of the SrTiO₃ phase was calculated to be 83.6 nm, and for the TiO₂ phase it was 72.25 nm. The TEM images showed that the crystallites were agglomerated, due to their nanosize nature. The AC resistivity was measured as temperature dependence with different frequencies 1 kHz and 10 kHz. The resistivity was decreased by raising the frequency. The dielectric properties were measured as the temperature dependence at two frequencies, 1 kHz and 10 kHz. The maximum amount of dielectric constant corresponded to the Curie temperature and the transformation from ferroelectric to paraelectric at 1 kHz was sharp at 10 kHz. Polarization–electric field hysteresis loops for BST samples were measured using a Sawer–Tawer modified circuit. It was shown that the polarization decreased with increasing temperature for all samples. Full article

Bilayer coatings of barium strontium titanate (Ba_xSr_(1−x)TiO₃)/poly [(vinylidenefluoride-co-trifluoroethylene] (PVDF-TrFE) were integrated on silicon Si (100) for pyroelectric devices. Pyroelectric properties of the composite were determined for different electrode materials (silver and aluminum) and different electrodes configurations creating an electric field in parallel and in-plane direction in the ferroelectric coating. For this purpose, parallel-plate and planar interdigital capacitors were fabricated. Anisotropy in the pyroelectric response was noted for the different directions of the measured electrical potential. The dynamic method was used to evaluate the pyroelectric properties in the temperature range of 22 to 48 °C. Pyroelectric response with a higher value was observed at the one plate’s configuration of interdigital electrodes. The voltage response was the strongest when silver contacts were used. At temperatures near room temperature, the voltage increased by 182 µV at resolution of 7 µV/°C for the in-plain device configuration, vs. 290 µV at a resolution of 11 µV/°C for the out-of-plain configuration. A relationship between the surface morphology of the ferroelectric oxide and oxide/polymer coating and the pyroelectric voltage was also found, proving the smoothening effect of the introduction of polymer PVDF-TrFE over the BaSrTiO₃ grains. Full article

Highly textured Ba_0.5Sr_0.5TiO₃ and Ba_0.6Sr_0.4TiO₃ thin films have been successfully processed using chemical solution deposition (CSD) techniques and annealed at different temperatures to investigate the influence on crystal growth. Microstructure and texture have been evaluated using SEM and XRD techniques. The films showed a homogeneous thickness of ~120 nm and the grain growth seemed to be highly influenced by the annealing temperature. Moreover, by tuning the deposition and annealing conditions, an almost epitaxial growth of Ba_0.6Sr_0.4TiO₃ on the platinized silicon substrate has been achieved. Nevertheless, the samples showed severe cracking due to the strain imposed by the substrate or due to the growing direction. Full article

The combined effect on the variation of the in-situ deposition temperature and the variation of the applied power on the deposition rate (DR), gap energy (E_g), and resistivity (ρ) in barium strontium titanate thin films, deposited into RF (radio frequency)–magnetron cosputtering equipment, are presented in this research. The simultaneous action of two magnetrons (BaTiO₃ and SrTiO₃) is explained using the first and second derivative of Boltzmann’s sigmoidal equation. This found that a deposition gradient is a very novel analysis. Using the color-code lines built through MATLAB^® and analyzing the trend information, taking into account the influence of the calculated “x” parameter, by means of the Boltzmann’s sigmoidal equation fit, we propose a method to set up an RF–magnetron cosputtering system to predict the DR(x,T), E_g(x,T), and ρ(x,T) values of Ba_xSr_1−xTiO₃ solid solutions with 0 ≤ x ≤ 1 for amorphous and crystalline phases. This method can be a versatile tool to optimize the deposition process with, or without, in situ deposition temperature. Full article