Search Results (43)

The near-surface air temperature lapse rate (SATLR) is a crucial parameter in climate, hydrology, and ecology research conducted in mountainous regions. However, existing research has difficulty characterizing its dynamic changes on an hourly scale. Obtaining data with high spatiotemporal resolution in complex terrains using existing methods poses challenges. This study introduces a hierarchical method for estimating SATLR at high spatiotemporal resolutions based on Fengyun-4A (FY-4A) Advanced Geostationary Radiation Imager (AGRI) land surface temperature (LST) data and machine learning techniques. Based on reconstructed FY-4A AGRI LST data, this study downscales the 4 km resolution data to a 1 km resolution using machine learning. It then estimates the spatial distribution of near-surface air temperature (SAT) and normalized near-surface air temperature (nSAT) by integrating station observations. Subsequently, high spatiotemporal resolution SATLRs are estimated, and their spatial and temporal distribution characteristics in the Beijing–Tianjin–Hebei mountainous region are analyzed. The results indicate that the SATLR exhibits a predominant distribution of 2~6 °C/km annually across the study area. However, in specific regions such as Taihang Mountains in the southwest, Damajun Mountain in the northwest, and certain areas of central Beijing City, the SATLR exceeds 6 °C/km in depth. Conversely, in Chengde City in the northeast and Huapiling in Damajun Mountain in the northwest, the SATLR is shallower than 2 °C/km. Seasonally, the average SATLR displays significant variation, with 3~5 °C/km being prevalent in spring, summer, and autumn, and 2~4 °C/km in winter. Moreover, the diurnal SATLR patterns from the second to fifth altitude grades exhibit consistency throughout the year and across seasons, albeit with varying overall values at different altitudes. Notably, the SATLR of the first altitude grade demonstrates stability within a day at lower elevations. Full article

Retrieving LST from infrared spectral observations is challenging because it needs separation from emissivity in surface radiation emission, which is feasible only when the state of the surface–atmosphere system is known. Thanks to its high spectral resolution, the Infrared Atmospheric Sounding Interferometer (IASI) instrument onboard Metop polar-orbiting satellites is the only sensor that can simultaneously retrieve LST, the emissivity spectrum, and atmospheric composition. Still, it cannot penetrate thick cloud layers, making observations blind to surface emissions under cloudy conditions, with surface and atmospheric parameters being flagged as voids. The present paper aims to discuss a downscaling–fusion methodology to retrieve LST missing values on a spatial field retrieved from spatially scattered IASI observations to yield level 3, regularly gridded data, using as proxy data LST from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) flying on Meteosat Second Generation (MSG) platform, a geostationary instrument, and from the Advanced Very High-Resolution Radiometer (AVHRR) onboard Metop polar-orbiting satellites. We address this problem by using machine learning techniques, i.e., Gradient Boosting, Random Forest, Gaussian Process Regression, Neural Network, and Stacked Regression. We applied the methodology over the Po Valley region, a very heterogeneous area that allows addressing the trained models’ robustness. Overall, the methods significantly enhanced spatial sampling, keeping errors in terms of Root Mean Square Error (RMSE) and bias (Mean Absolute Error, MAE) very low. Although we demonstrate and assess the results primarily using IASI data, the paper is also intended for applications to the IASI follow-on, that is, IASI Next Generation (IASI-NG), and much more to the Infrared Sounder (IRS), which is planned to fly this year, 2025, on the Meteosat Third Generation platform (MTG). Full article

The ever-increasing capacity of numerical weather prediction (NWP) models requires accurate flow information at higher spatial and temporal resolutions. The atmospheric motion vectors (AMVs) extracted from the Advanced Geostationary Radiation Imager (AGRI) mounted on the Fengyun-4A (FY-4A) satellite can provide information about atmospheric flow fields on small scales. This study focused on the assimilation of FY-4A AMVs and its impact on forecasts in the regional NWP system of the China Meteorological Administration—Beijing (CAM-BJ). The statistical characterization of FY-4A AMVs was firstly analyzed, and an optimal observation error in each vertical level was obtained. Three groups of retrospective runs over a one-month period were conducted, and the impact of assimilating the AMVs with different strategies on the forecasts of the CMA-BJ system were compared and evaluated. The results suggested that the optimal observation errors reduced the standard deviation of the background departures for U and V wind, leading to an improvement in the standard deviation in the corresponding analysis departures of about 8.3% for U wind and 7.3% for V wind. Assimilating FY-4A AMV data with a quality indicator (QI) above 80 and the optimal observation errors reduced the error of upper wind forecast in the CMA-BJ system. A benefit was also obtained in the error of surface wind forecast after 6 h of the forecasts, although it was not significant. For rainfall forecast with different thresholds, the score skills increased slightly after 6 h of the forecasts. There was an overall improvement for the overprediction of 24 h accumulated precipitation forecast including the AMVs, even when conventional observations were relatively rich. The application of FY-4A AMVs with a QI > 80 and adjustment to observation errors has a positive impact on the upper wind forecast in the CMA-BJ system, improving the score skill of rainfall forecasting. Full article

Extreme weather events like typhoons have become more frequent due to global climate change. Current typhoon monitoring methods include manual monitoring, mathematical morphological methods, and artificial intelligence. Manual monitoring is accurate but labor-intensive, while AI offers convenience but requires accuracy improvements. Mathematical morphology methods, such as brightness temperature perturbation (BTP) and a spatio-temporally consistent (STC) Scale-Invariant Feature Transform (SIFT), remain mainstream for typhoon positioning. This paper enhances BTP and STC SIFT methods for application to Fengyun 4A (FY-4A) Advanced Geosynchronous Radiation Imager (AGRI) L1 data, incorporating parallax correction for more accurate surface longitude and latitude positioning. The applicability of these methods for different typhoon intensities and monitoring time resolutions is analyzed. Automated monitoring with one-hour observation intervals in the northwest Pacific region demonstrates high positioning accuracy, reaching 25 km or better when compared to best path data from the China Meteorological Administration (CMA). For 1 h remote sensing observations, BTP is more accurate for typhoons at or above typhoon intensity, while STC SIFT is more accurate for weaker typhoons. In the current era of a high temporal resolution of typhoon monitoring using geostationary satellites, the method presented in this paper can serve the national meteorological industry for typhoon monitoring, which is beneficial to national pre-disaster prevention work as well as global meteorological research. Full article

Global dust events have become more frequent due to climate change and increased human activity, significantly impacting air quality and human health. Previous studies have mainly focused on determining atmospheric dust pollution levels through atmospheric parameter simulations or AOD values obtained from satellite remote sensing. However, research on the quantitative description of dust intensity and its cross-regional transport characteristics still faces numerous challenges. Therefore, this study utilized Fengyun-4A (FY-4A) satellite Advanced Geostationary Radiation Imager (AGRI) imagery, Cloud-Aerosol Lidar, and Infrared Pathfinder Satellite Observation (CALIPSO) lidar, and other auxiliary data, to conduct three-dimensional spatiotemporal monitoring and a cross-regional transport analysis of two typical dust events in the Beijing–Tianjin–Hebei (BTH) region of China using four dust intensity indices Infrared Channel Shortwave Dust (Icsd), Dust Detection Index (DDI), dust value (DV), and Dust Strength Index (DSI)) and the HYSPLIT model. We found that among the four indices, DDI was the most suitable for studying dust in the BTH region, with a detection accuracy (POCD) of >88% at all times and reaching a maximum of 96.14%. Both the 2021 and 2023 dust events originated from large-scale deforestation in southern Mongolia and the border area of Inner Mongolia, with dust plumes distributed between 2 and 12 km being transported across regions to the BTH area. Further, when dust aerosols are primarily concentrated below 4 km and PM10 concentrations consistently exceed 600 µg/m³, large dust storms are more likely to occur in the BTH region. The findings of this study provide valuable insights into the sources, transport pathways, and environmental impacts of dust aerosols. Full article

Near-surface air temperature (T_a) estimation by geostationary meteorological satellites is mainly carried out under clear-sky conditions. In this study, we propose an all-weather T_a estimation method utilizing FY-4A Advanced Geostationary Radiation Imager (AGRI) and the Global Forecast System (GFS), along with additional auxiliary data. The method includes two neural-network-based T_a estimation models for clear and cloudy skies, respectively. For clear skies, AGRI LST was utilized to estimate the T_a (T_a,clear), whereas cloud top temperature and cloud top height were employed to estimate the T_a for cloudy skies (T_a,cloudy). The estimated T_a was validated using the 2020 data from 1211 stations in China, and the RMSE values of the T_a,clear and T_a,cloudy were 1.80 °C and 1.72 °C, while the correlation coefficients were 0.99 and 0.986, respectively. The performance of the all-weather T_a estimation model showed clear temporal and spatial variation characteristics, with higher accuracy in summer (RMSE = 1.53 °C) and lower accuracy in winter (RMSE = 1.88 °C). The accuracy in southeastern China was substantially better than in western and northern China. In addition, the dependence of the accuracy of the T_a estimation model for LST, CTT, CTH, elevation, and air temperature were analyzed. The global sensitivity analysis shows that AGRI and GFS data are the most important factors for accurate T_a estimation. The AGRI-estimated T_a showed higher accuracy compared to the ERA5-Land data. The proposed models demonstrated potential for T_a estimation under all-weather conditions and are adaptable to other geostationary satellites. Full article

The Advanced Geostationary Radiation Imager (AGRI) sensor on board the geostationary satellite Fengyun-4B (FY-4B) is capable of capturing particles in different phases in the atmospheric environment and acquiring aerosol observation data with high spatial and temporal resolution. To understand the quality of the Land Aerosol (LDA) product of AGRI and its application prospects, we conducted a comprehensive evaluation of the AGRI LDA AOD. Using the 550 nm AGRI LDA AOD (550 nm) of nearly 1 year (1 October 2022 to 30 September 2023) to compare with the Aerosol Robotic Network (AERONET), MODIS MAIAC, and Himawari-9/AHI AODs. Results show the erratic algorithmic performance of AGRI LDA AOD, the correlation coefficient (R), mean error (Bias), root mean square error (RMSE), and the percentage of data with errors falling within the expected error envelope of $\pm (0.05+0.15\times {\mathrm{AOD}}_{AERONET})$ (within EE15) of the LDA AOD dataset are 0.55, 0.328, 0.533, and 34%, respectively. The LDA AOD appears to be overestimated easily in the southern and western regions of China and performs poorly in the offshore areas, with an R of 0.43, a Bias of 0.334, a larger RMSE of 0.597, and a global climate observing system fraction (GCOSF) percentage of 15% compared to the inland areas (R = 0.60, Bias = 0.163, RMSE = 0.509, GCOSF = 17%). Future improvements should focus on surface reflectance calculation, water vapor attenuation, and more suitable aerosol model selection to improve the algorithm’s accuracy. Full article

The Fengyun-4B (FY-4B) satellite is currently the primary operational geostationary meteorological satellite in China, replacing the previous FY-4A satellite. The advanced geostationary radiation imager (AGRI) aboard the FY-4B satellite provides an operational sea surface temperature (SST) product with a high observation frequency of 15 min. This paper conducts the first data quality assessment of operational SST products from the FY-4B/AGRI using quality-controlled measured SSTs from the in situ SST quality monitor dataset and foundation SSTs produced by the operational sea surface temperature and sea ice analysis (OSTIA) system from July 2023 to January 2024. The FY-4B/AGRI SST product provides a data quality level flag on a pixel-by-pixel basis. Accuracy evaluations are conducted on the FY-4B/AGRI SST product with different data quality levels. The results indicate that the FY-4B/AGRI operational SST generally has a negative mean bias compared to in situ SST and OSTIA SST, and that the accuracy of the FY-4B/AGRI SST, with an excellent quality level, can meet the needs of practical applications. The FY-4B/AGRI SST with an excellent quality level demonstrates a strong correlation with in situ SST and OSTIA SST, with a correlation coefficient R exceeding 0.99. Compared with in situ SST, the bias, root mean square error (RMSE), and unbiased RMSE (ubRMSE) of the FY-4B/AGRI SST with an excellent quality level are −0.19, 0.66, and 0.63 °C in daytime, and −0.15, 0.70, and 0.68 °C at night, respectively. Compared with OSTIA SST, the bias, RMSE, and ubRMSE of the FY-4B/AGRI SST with an excellent data quality level are −0.10, 0.64, and 0.63 °C in daytime, and −0.13, 0.68, and 0.67 °C at night. The FY-4B/AGRI SST tends to underestimate the sea water temperature in mid–low-latitude regions, while it tends to overestimate sea water temperature in high-latitude regions and near the edges of the full disk. The time-varying validation of FY-4B/AGRI SST accuracy shows weak fluctuations with a period of 3–4 months. Hourly accuracy verification shows that the difference between the FY-4B/AGRI SST and OSTIA SST reflects a diurnal effect. However, FY-4B/AGRI SST products need to be used with caution around midnight to avoid an abnormal accuracy. This paper also discusses the relationships between the FY-4B/AGRI SST and satellite zenith angle, water vapor content, wind speed, and in situ SST, which have an undeniable impact on the underestimation of the FY-4B/AGRI operational SST. The accuracy of the FY-4B/AGRI operational SST retrieval algorithm still needs to be further improved in the future. Full article

Accurate cloud detection is a crucial initial stage in optical satellite remote sensing. In this study, a daytime cloud mask model is proposed for the Advanced Geostationary Radiation Imager (AGRI) onboard the Fengyun 4A (FY-4A) satellite based on a deep learning approach. The model, named “Convolutional and Attention-based Cloud Mask Net (CACM-Net)”, was trained using the 2021 dataset with CALIPSO data as the truth value. Two CACM-Net models were trained based on a satellite zenith angle (SZA) < 70° and >70°, respectively. The study evaluated the National Satellite Meteorological Center (NSMC) cloud mask product and compared it with the method established in this paper. The results indicate that CACM-Net outperforms the NSMC cloud mask product overall. Specifically, in the SZA < 70° subset, CACM-Net enhances accuracy, precision, and F1 score by 4.8%, 7.3%, and 3.6%, respectively, while reducing the false alarm rate (FAR) by approximately 7.3%. In the SZA > 70° section, improvements of 12.2%, 19.5%, and 8% in accuracy, precision, and F1 score, respectively, were observed, with a 19.5% reduction in FAR compared to NSMC. An independent validation dataset for January–June 2023 further validates the performance of CACM-Net. The results show improvements of 3.5%, 2.2%, and 2.8% in accuracy, precision, and F1 scores for SZA < 70° and 7.8%, 11.3%, and 4.8% for SZA > 70°, respectively, along with reductions in FAR. Cross-comparison with other satellite cloud mask products reveals high levels of agreement, with 88.6% and 86.3% matching results with the MODIS and Himawari-9 products, respectively. These results confirm the reliability of the CACM-Net cloud mask model, which can produce stable and high-quality FY-4A AGRI cloud mask results. Full article

The Tibetan Plateau vortex (TPV), as an α-scale mesoscale weather system, often brings severe weather conditions like torrential rain and severe convective storms. Based on the detections from the Global Precipitation Measurement (GPM) Core Observatory’s Dual-frequency Precipitation Radar (DPR) and the FY-4A satellite’s Advanced Geostationary Radiation Imager (AGRI), combined with ERA5 reanalysis data, the precipitation characteristics of a TPV moving eastward during 8–13 July 2021 at different developmental stages are explored in this study. It was clear that the near-surface precipitation rate of the TPV during the initial stage at the eastern Tibetan Plateau (TP) was below 1 mm·h⁻¹, implying overall weak precipitation dominated by stratiform clouds. After moving out of the TP, the radar reflectivity factor (Ze), precipitation rate, and normalized intercept parameter (dBNw) significantly increased, while the proportion of convective clouds gradually rose. Following the TPV movement, the distribution range and vertical thickness of Ze, mass-weighted mean diameter (Dm), and dBNw tended to increase. The high-frequency region of Ze appeared at 15–20 dBZ, while Dm and dBNw occurred at around 1 mm and 33 mm⁻¹·m⁻³, respectively. Near the melting layer, Ze was characterized by a significant increase due to the aggregation and melting of ice crystals. The precipitation rate of convective clouds was generally greater than that of stratiform clouds, whilst both of them increased during the movement of the TPV. Particularly, at 01:00 on 12 July, there was a significant increase in the precipitation rate and Dm of convective clouds, while dBNw noticeably decreased. These findings could provide valuable insights into the three-dimensional structure and microphysical characteristics of the precipitation during the movement of the TPV, contributing to a better understanding of cloud precipitation mechanisms. Full article

The Advanced Geostationary Radiation Imager (AGRI) carried by the FengYun-4A (FY-4A) satellite enables the continuous observation of local weather. However, FY-4A/AGRI infrared satellite observations are strongly influenced by clouds, which complicates their use in all-sky data assimilation. The presence of clouds leads to increased uncertainty, and the observation-minus-background (O−B) differences can significantly deviate from the Gaussian distribution assumed in the variational data assimilation theory. In this study, we introduce two cloud-affected (Ca) indices to quantify the impact of cloud amount and establish dynamic observation error models to address biases between O−B and Gaussian distributions when assimilating all-sky data from FY-4A/AGRI observations. For each Ca index, we evaluate two dynamic observation error models: a two-segment and a three-segment linear model. Our findings indicate that the three-segment linear model we propose better conforms to the statistical characteristics of FY-4A/AGRI observations and improves the Gaussianity of the O−B probability density function. Dynamic observation error models developed in this study are capable of handling cloud-free or cloud-affected FY-4A/AGRI observations in a uniform manner without cloud detection. Full article

The distribution and variation of top-of-atmosphere longwave cloud radiative forcing (LCRF_TOA) has drawn a significant amount of attention due to its importance in understanding the energy budget. Advancements in sensor and data processing technology, as well as a new generation of geostationary satellites, such as the FengYun-4A (FY-4A), allow for high spatiotemporal resolutions that are crucial for real-time radiation monitoring. Nevertheless, there is a distinct lack of official top-of-atmosphere outgoing longwave radiation products under clear-sky conditions (OLR_clear). Consequently, this study addresses the challenge of constructing LCRF_TOA data with high spatiotemporal resolution over the full disk region of FY-4A. After simulating the influence of atmospheric parameters on OLR_clear based on the SBDART radiation transfer model (RTM), we developed a model for estimating OLR_clear using infrared channels from the advanced geosynchronous radiation imager (AGRI) onboard the FY-4A satellite. The OLR_clear results showed an RMSE of 5.05 W/m² and MBE of 1.59 W/m² compared to ERA5. The corresponding RMSE and MBE value compared to CERES was 6.52 W/m² and 2.39 W/m². Additionally, the calculated LCRF_TOA results were validated against instantaneous, daily average, and monthly average ERA5 and CERES LCRF_TOA products, supporting the validity of the algorithm proposed in this paper. Finally, the changes in LCRF_TOA due to varied cloud heights (high, medium, and low cloud) were analyzed. This study provides the basis for comprehensive studies on the characteristics of top-of atmosphere radiation. The results suggest that high-height clouds exert a greater degree of radiative forcing more frequently, while low-height clouds are more frequently found in the lower forcing range. Full article

Surface upward longwave radiation (SULR) is one of the four components of surface net radiation. Geostationary satellites can provide high temporal but coarse spatial resolution SULR products. Downscaling coarse SULR to a higher resolution is important for fine-scale thermal condition monitoring. Statistical regression downscaling is widely used due to its simplicity and is built on the assumption that the thermal parameter like land surface temperature (LST) or SULR has a relationship with the related surface factors like the normalized difference vegetation index (NDVI), and the relationship remains unchanged in any scales. In this study, to establish the relationship between SULR and the related surface factors, we chose the multiple linear regression (MLR) model and five surface factors (i.e., the modified normalized difference water index (MNDWI), normalized difference built-up and soil index (NDBSI), NDVI, normalized moisture difference index (NMDI), and urban index (UI)) to drive the downscaling process. Additionally, a step-by-step downscaling strategy was applied to reach the 100-fold increase in spatial resolution, transitioning the estimated SULR from 4 km of the advanced geostationary radiation imager (AGRI) onboard FengYun-4B (FY-4B) satellite to 40 m of the visual and infrared multispectral imager (VIMI) in infrared spectrum onboard GaoFen5-02 (GF5-02). Finally, we evaluated the downscaling results by comparing the downscaled SULR values with the in situ measured SULR and GF5-02-calculated SULR, and the root mean square errors (RMSEs) were 19.70 W/m² and 24.86 W/m², respectively. Throughout this MLR-based step-by-step downscaling method (high-frequency data from FY-4B and high spatial resolution data from GF5-02), high spatiotemporal SULR (15 min temporal resolution, 40 m spatial resolution) were successfully generated instead of coarse spatial resolution ones from the FY-4B satellite or a coarse temporal resolution one from the GF5-02 satellite, relieving the above-mentioned conflict to some extent. Full article

The Advanced Meteorological Image (AMI) onboard GEOKOMPSAT 2A (GK-2A) enables the retrieval of dust aerosol optical depth (DAOD) from geostationary satellites using infrared (IR) channels. IR observations allow the retrieval of DAOD and the dust layer altitude (24 h) over surface properties, particularly over deserts. In this study, dust events in northeast Asia from 2020 to 2021 were investigated using five GK-2A thermal IR bands (8.7, 10.5, 11.4, 12.3, and 13.3 μm). For the dust cloud, the brightness temperature differences (BTDs) of 10.5 and 12.3 μm were consistently negative, while the BTD of 8.7 and 10.5 μm varied based on the dust intensity. This study exploited these optical properties to develop a physical approach for DAOD lookup tables (LUTs) using IR channels to retrieve the DAOD. To this end, the characteristics of thermal radiation transfer were simulated using the forward model; dust aerosols were explained by BTD (10.5, 12.3 μm)—an intrinsic characteristic of dust aerosol. The DAOD and dust properties were gained from a brightness temperature (BT) of 10.5 μm and BTD of 10.5, 12.3 μm. Additionally, the cumulative distribution function (CDF) was employed to strengthen the continuity of 24-h DAOD. The CDF was applied to the algorithm by calculating the conversion value coefficient for the DAOD error correction of the IR, with daytime visible aerosol optical depth as the true value. The results show that the DAOD product can be successfully applied during the daytime and nighttime to continuously monitor the flow of yellow dust from the GK-2A satellite in northeast Asia. In particular, the validation results for IR DAOD were similar to the active satellite product (CALIPSO/CALIOP) results, which exhibited a tendency similar to that for IR DAOD at night. Full article

Cloud detection is an essential preprocessing step when using satellite-borne infrared hyperspectral sounders for data assimilation and atmospheric retrieval. In this study, we propose a cloud detection algorithm based solely on the sensitivity and detection characteristics of the FY-4A Geostationary Interferometric Infrared Sounder (GIIRS), rather than relying on other instruments. The algorithm consists of four steps: (1) combining observed radiation and clear radiance data simulated by the Community Radiative Transfer Model (CRTM) to identify clear fields of view (FOVs); (2) determining the number of clouds within adjacent 2 × 2 FOVs via a principal component analysis of observed radiation; (3) identifying whether there are large observed radiance differences between adjacent 2 × 2 FOVs to determine the mixture of clear skies and clouds; and (4) assigning adjacent 2 × 2 FOVs as a cloud cluster following the three steps above to select an appropriate classification threshold. The classification results within each cloud detection cluster were divided into the following categories: clear, partly cloudy, or overcast. The proposed cloud detection algorithm was tested using one month of GIIRS observations from May 2022 in this study. The cloud detection and classification results were compared with the FY-4A Advanced Geostationary Radiation Imager (AGRI)’s operational cloud mask products to evaluate their performance. The results showed that the algorithm’s performance is significantly influenced by the surface type. Among all-day observations, the highest recognition performance was achieved over the ocean, followed by land surfaces, with the lowest performance observed over deep inland water. The proposed algorithm demonstrated better clear sky recognition during the nighttime for ocean and land surfaces, while its performance was higher for partly cloudy and overcast conditions during the day. However, for inland water surfaces, the algorithm consistently exhibited a lower cloud recognition performance during both the day and night. Moreover, in contrast to the GIIRS’s Level 2 cloud mask (CLM) product, the proposed algorithm was able to identify partly cloudy conditions. The algorithm’s classification results departed slightly from those of the AGRI’s cloud mask product in areas with clear sky/cloud boundaries and minimal convective cloud coverage; this was attributed to the misclassification of clear sky as partly cloudy under a low-resolution situation. AGRI’s CLM products, temporally and spatially collocated to the GIIRS FOV, served as the reference value. The proportion of FOVs consistently classified as partly cloudy to the total number of partly cloudy FOVs was 40.6%. In comparison with the GIIRS’s L2 product, the proposed algorithm improved the identification performance by around 10%. Full article