Search Results (19)

Objectives: Previous literature has already discussed the effects of age and sex on the diagnosis and treatment of malocclusion problems. However, this effect varies among different ethnic groups. These differences have not yet been investigated in many populations, such as Arab orthodontic patients and residents of Israel. Therefore, it is crucial to understand such variations in specific populations for better diagnosis and treatment. The main aim of this study is to provide novel knowledge concerning skeletal classes I and II among a cohort of Arab patients who are citizens of Israel. We used parameters obtained from lateral cephalograms to understand the variations among different sex and age subgroups. We also examined the correlations and performed principal component analysis (PCA). Methods: This study was based on the coded records of 394 Arab patients diagnosed with skeletal Class I occlusion (SCIO) or skeletal Class II malocclusion (SCIIMO), according to the individualized ANB (Calculated_ANB) of Panagiotidis and Witt. Results: Among patients with SCIO, males had a significantly more horizontal growth pattern (PFH/AFH) and anterior mandible rotation (ML-NSL) than females. Regarding patients with SCIIMO, female adults had more hyperdivergent jaw bases than adolescents (ML-NL) and a more posteriorly rotated mandible (ML-NSL). Spearman’s analysis revealed many significant correlations, like Calculated_ANB, ANB angle, and Wits appraisal. The PCA results showed a remarkable ability to explain 88.6% of the sample variance using four principal components. Conclusions: This research revealed new information regarding Arab orthodontic patients diagnosed with skeletal class I or II. The results demonstrate the differences between the two classes. In addition, this study demonstrated the variation and correlation of cephalometric parameters among different sex and age subgroups in skeletal class I and II Arab patients, especially considering Calculated_ANB. Therefore, this study highlights the need to consider these differences when diagnosing patients and to distinguish the differences across different sex and age subgroups in the diagnosis and treatment process. Furthermore, the PCA results showed the importance of ML-NSL, SN-Pg, PFH/AFH ratio, and NL-ML in explaining the data variance. Full article

Background/Objectives: This cross-sectional analytical study investigated the relationship between the craniofacial morphology, condylar displacement, and degenerative changes in the temporomandibular joints (TMJs) in adult patients with class II skeletal malocclusion. To compare cephalometric variables, joint space dimensions, and centric slide measurements between patients with and without CBCT-confirmed TMJ degenerative alterations. Methods: Sixty adults with class II malocclusion were divided into two equal groups (n = 30) based on the presence or absence of TMJ degenerative changes on CBCT. Joint spaces were measured, condylar displacement was evaluated using a condylar position indicator (CPI), and cephalometric analysis was performed in both maximal intercuspation and centric relation. Statistical comparisons were performed using t-tests, chi-squared tests, and Pearson’s correlation analysis. Significance was set at p < 0.05. Results: Patients with degenerative TMJ changes exhibited significantly greater overjet (p = 0.0001) and a trend toward increased ANB angles (p = 0.055). The superior joint space was reduced on the right side (p = 0.031). Condylar displacements ≥ 2 mm were more frequent in the affected group and correlated with sagittal cephalometric discrepancies (45% vs. 24% in controls). Conclusions: Aggravated skeletal class II malocclusion with increased overjet could be associated with TMJ degenerative changes. CR-based cephalometry and CBCT evaluation may aid in diagnostic assessment, but longitudinal studies are needed to confirm the clinical relevance. Full article

Background/Objectives: This study aims to investigate the correlation between facial soft tissues, teeth, and skeletal growth patterns in order to provide an accurate diagnosis and orthodontic treatment plan using digital examination of lateral cephalograms. Achieving the best orthodontic outcome begins with an accurate, timely, and thorough diagnosis before starting the treatment phase. Methods: This cross-sectional study investigated the correlation between facial soft tissues, dental hard tissues, and skeletal growth patterns in 100 Romanian orthodontic patients (52 females, 48 males; median age 26 years) using digital lateral cephalograms. The measurements included skeletal parameters (ANB angle, FMA, Wits appraisal), dental parameters (inclinations of upper and lower incisors, interincisal angle), and soft tissue parameters (nasolabial angle, upper and lower lip positions relative to E-plane), all assessed using the AI-powered WEBCEPH software. Statistical analysis was conducted using RStudio (version 4.3.1). Results: A total of 100 subjects (52% female; median age, 26 years [range, 19–32 years]) were evaluated. No significant gender-based differences were found across cephalometric, soft tissue, or dental parameters. When stratified by ANB classification (Class I, 41%; Class II, 48%; Class III, 11%), significant differences emerged in the interincisal angle (p = 0.047), L1-to-LOP measurement (p < 0.001), lip-to-E-plane distances (p ≤ 0.009), Wits appraisal (p < 0.001), and the ANB angle itself (p < 0.001). Furthermore, stratification by FMA classification revealed expected differences in FMA values (p < 0.001) and a significant variation in the distribution of ANB classes (p = 0.042). All other cephalometric and soft tissue parameters remained comparable across FMA categories. Conclusions: The study highlights the importance of integrating hard and soft tissue analyses in orthodontic diagnosis and treatment planning to achieve optimal aesthetic and functional outcomes. Full article

Background: Class II Division 1 malocclusion is often characterized by an increased overjet, which has traditionally been considered a negative predictor of aesthetic outcomes, treatment efficacy, and long-term stability. Although early two-phase treatment is generally perceived as less effective than a single-stage pubertal peak intervention, it may be beneficial in cases with concerns such as trauma risk or bullying. This study aimed to assess the relationship between initial overjet and sagittal correction (as measured by the ANB and WITS indices) to identify a threshold beyond which two-phase treatment might be more effective. Methods: A retrospective analysis was conducted on 58 patients (mean age: 9.01 years), all of whom were treated consecutively with the Manni Telescopic Herbst Appliance. Lateral cephalograms taken at the start (T0) and end (T1) of Herbst treatment were analyzed to evaluate changes in skeletal and dental parameters. Results: A significant positive correlation was found between higher initial overjet and increased skeletal sagittal correction. Specifically, for every 1 mm increase in overjet, there was a 0.65 mm reduction in the WITS index and a 0.30° decrease in the ANB angle (p < 0.01). These effects were more pronounced when the initial overjet exceeded 8.0 mm. Conclusions: The Manni Telescopic Herbst Appliance demonstrated enhanced skeletal correction in patients with larger initial overjet values, particularly when the overjet exceeded 8.0 mm. This suggests that early two-phase treatment may be especially beneficial in such cases. Full article

Background/Objectives: Jaw deformities affect not only facial aesthetics but also various oral functions. While previous studies have demonstrated that mandibular prognathism (MP) alters masticatory-induced brain blood flow (BBF), the temporal characteristics of these hemodynamic changes have remained unclear. In this cross-sectional observational study, we investigated the following two specific objectives: (1) whether food hardness affects not only the magnitude but also the temporal patterns of BBF changes during mastication and (2) how malocclusion is associated with these temporal hemodynamic responses. Methods: Twenty-six participants with normal occlusion (NORM) and twenty patients with MP participated in this study. BBF was measured using functional near-infrared spectroscopy, while participants chewed soft paraffin or hard gummy candy. Maximum oxygenated hemoglobin (oxy-Hb) values and time-to-peak BBF were analyzed. Results: While food hardness did not significantly affect maximum oxy-Hb within groups, the MP group showed significantly lower responses during hard gummy candy mastication compared to the NORM group. The occlusal contact area exhibited significant positive correlation with maximum oxy-Hb values, while the ANB angle, an indicator of intermaxillary skeletal relationship, showed no significant correlation with BBF parameters. The hard gummy candy/paraffin ratio of maximum oxy-Hb was significantly higher in the NORM group compared to the MP group. Time-to-peak BBF was approximately twice as long for hard gummy candy compared to paraffin in both groups, with no significant differences between groups. Conclusions: These findings reveal that while MP attenuates the magnitude of masticatory-induced BBF, particularly during hard food mastication, the temporal adaptation to increased food hardness is preserved. This dissociation between magnitude and timing effects suggests that intact basic neurovascular coupling mechanisms would be maintained even in the condition of altered masticatory function in a MP subject, which is providing new insights for rehabilitation strategies in orthognathic surgery cases. Full article

Objective: To evaluate mandibular kinematics in an orthodontic population using the Modjaw^® optical jaw tracking system. Materials and methods: A total of 154 orthodontic patients underwent mandibular kinematic analysis using the Modjaw^® system. ANB values determined skeletal classification, while dental classification was assessed on digital casts. The Modjaw^® records were taken as instructed by the manufacturer, and data collected from the readings included the discrepancy between centric occlusion and maximum intercuspation, maximum opening, Bennett angles, and sagittal condylar guidance. The presence or absence of temporomandibular disorders was determined by the DC-TMD questionnaires. Non-parametric tests and Spearman correlations were applied for the statistical analysis. Results: Significant differences in mandibular kinematics were observed between skeletal classes, particularly in CO-MI discrepancies, Bennett angles, and maximum opening (p < 0.05). TMD symptoms were associated with higher absolute CO-MI discrepancies but did not significantly alter other kinematic parameters. Weak correlations were found between sagittal condylar guidance and anterior guidance variables. Conclusions: Mandibular kinematics differ by skeletal classification, with Class III patients demonstrating distinct patterns. While TMD symptoms impact CO-MI discrepancies, overall mandibular dynamics remain consistent. Full article

Introduction: Cephalometric analysis is an essential tool used in orthodontic diagnosis and treatment planning. Aim: The aim of this study was to compare the measurement reliabilities (repeatability and reproducibility) of the Tau and Yen angles and compare them to the results obtained for the ANB angle. Methods: Repeatability and reliability assessments for the seven points (N, A, B, S, W, M, G) used in the analysis of ANB, Yen and Tau angles were performed twice with an interval of 7 days by 22 orthodontists. The measurement results for ANB, Yen and Tau angles were assessed using the Bland–Altman formula, Dahlberg formula, intraclass correlation coefficients (ICCs), R² coefficients and R&R. In order to assess the number of individual skeletal classes of sagittal discrepancy, the Pearson chi-squared test was used. With common parameters of df = 4, p < 0001, for the ANB angle, the result was χ² = 9104; for the Tau angle, χ² = 4556; and for the Yen angle, χ² = 4207. In order to determine the inter-rater reliability based on two-way ANOVA analysis without repetitions, the ICC (2,2) was used. The ICC (2,2) index at the 95% confidence level was 0.998 for the ANB angle, 0.997 for Tau and 0.998 for Yen. High values of the ICC index close to 1 indicate the agreement of the measurements and their high reliability. Results: The orthodontists in the study measured sagittal discrepancy significantly more accurately using the ANB angle compared to the Yen and Tau angles. Using a Bland–Altman plot, the bias and range of agreement within which 95% of the differences between measurements were accounted for were determined. For the ANB angle, the mean difference between measurements was 0.07 with a confidence interval of −1.55 to +1.69; for the Tau angle, the mean difference between measurements was 0.19 with a confidence interval of −2.92 to 3.30; and for the Yen angle, the mean difference was 0.09 with a confidence interval of −2.71 to +2.89. Using regression analysis, the measurements were assessed using the R2 index, which for the ANB angle was 0.952 (p < 0.001); for the Tau angle, R2 = 0.928 (p < 0.001), and for the Yen angle, R2 = 0.942 (p < 0.001). Conclusions: The obtained results of the assessment of the ANB, Tau and Yen angles confirm the thesis of the highest reliability, including repeatability and reproducibility, in the assessment of sagittal discrepancy in orthodontic diagnostics using the ANB angle, previously considered the gold standard. One of the basic factors attributed to the poorer repeatability and reproducibility of Tau and Yen measurements is human error related to the precision of determining new anthropometric points. Further studies to assess the usefulness of using the new Tau and Yen angle measurements in orthodontic diagnostics for sagittal discrepancy should be correlated with other measurements used so far, depending on the type of defects in the vertical dimension. It is necessary to consider enlarging the study group and performing longitudinal studies. Full article

Background and Objectives: The main objectives of our study were to assess sexual dimorphism and to compare the facial height, as well as the anteroposterior width of the upper airway, within adult Caucasians diagnosed with skeletal Class I and skeletal Class III malocclusion, based on a number of angular and linear cephalometric parameters. Materials and Methods: One hundred lateral cephalograms were selected from orthodontic adult Caucasian patients from western Romania. Several angular parameters (SNA, SNB, ANB, FMA, Y–FH, Ba–S–PNS and NL–ML angles) and linear parameters (total, upper and lower anterior facial height—TAFH, UAFH, LAFH; total posterior facial height—TPFH) were analysed for each case. The upper airway width parameters included the width of the nasopharynx, as well as the upper, middle and lower pharyngeal airway width (UPAW, MPAW and LPAW). Results: Distinct sexual dimorphism was observed regarding the vertical cephalometric parameters within both Class I and Class III groups, with males exhibiting significantly larger facial height parameters, while females demonstrated larger nasopharyngeal depth angles (Ba–S–PNS). The Y–FH angle had significantly higher values in Class I than in Class III subjects, regardless of sex. Upper airway dimensions showed sexual dimorphism specifically in Class III subjects, with females exhibiting larger UPAW values than males. The inter-class comparisons showed larger values for LPAW, especially in females. Correlation analyses revealed no statistically significant relationships between the vertical and the upper airway parameters in Class I subjects. UPAW showed a tendency to decrease in Class III subjects as TAFH and LAFH increased. Ba–S–PNS showed consistent negative correlations with the vertical dimensions in both groups. Conclusions: These findings suggest that skeletal Class I and Class III malocclusions exhibit not only different sagittal relationships, but also distinctive, sex-related vertical skeletal patterns within each group, and therefore it would be advised that male and female patients should be diagnosed and treated according to separate protocols. In our population, Class III males are more likely to require orthognathic surgery, in addition to orthodontic treatment, with a more reserved prognosis and they might have a higher risk of OSA or other respiratory disorders in comparison with Class III females. Full article

The ANB angle, the cephalometric parameter of choice for assessing the anteroposterior relationship between the maxilla and mandible, is subject to several limitations, prompting the investigation of alternative parameters. Objective: This study aimed to investigate the ABwise measurement as an alternative to the ANB angle for evaluating maxillomandibular relationships in orthodontics, particularly addressing the impact of skeletal discrepancies on conventional methods. Methods: A retrospective analysis was performed on a CBCT dataset of patients attending the University of Milan’s Department of Orthodontics and Maxillofacial Surgery, selected based on high-quality imaging, a full-cranium field of view, and a slice thickness between 150 and 300 μm. Eight craniofacial landmarks were annotated using the 3D Slicer software to calculate the ANB values and the new ABwise measurement. Statistical analyses included Spearman’s correlation (ρ), linear regression, and inter-rater agreement (Cohen’s κ score), with data classified into skeletal Classes I, II, and III based on defined thresholds. Results: 354 CBCT were selected and analyzed (mean age: 18.6 years). ABwise showed a strong correlation with the ANB angle (ρ = 0.805) and new normative ranges for ABwise were established: Class I (−1.4 ± 2.3 mm), Class II (>0.9 mm), and Class III (<−3.7 mm). Moderate agreement was observed between the ABwise and ANB classifications (κ = 0.527). ABwise effectively addressed limitations associated with divergence and vertical discrepancies, providing a more reliable assessment of skeletal sagittal relationships. Conclusions: ABwise presents a viable alternative to the ANB angle for three-dimensional cephalometric analysis, offering improved accuracy and alignment with radioprotection principles by reducing the CBCT field of view needed for its measurement. Further research is required in order to validate these findings across diverse populations and clinical scenarios. Full article

Background/Objectives: This study aimed to compare the associations of digital measurements obtained from orthopantomographies (OPGs) or panoramic radiographs and lateral cephalograms in evaluating facial asymmetry in patients with different skeletal classes. The sample consisted of 128 Romanian patients (67 females, 61 males) who sought orthodontic treatment. These measurements are an essential diagnostic tool for evaluating facial asymmetry in order to treat them. Methods: Lateral cephalograms and OPGs were obtained for each patient, and digital tracing was performed using the WebCeph program. Angular measurements (ANB, FMA, gonial angles) and linear measurements (ramus height, mandibular body length) were assessed on both imaging modalities. Results: Strong positive correlations were found between the gonial angle and ramus height measurements obtained from lateral cephalograms and OPGs (rs range: 0.800–0.946; p < 0.001). However, the mandibular body length showed weaker correlations between the two methods. Significant sex differences were observed, with males exhibiting larger craniofacial measurements compared to females (p < 0.05). The study population was quite young, as seen by the cohort’s median age of 21 years and interquartile range (IQR) of 16 to 29 years. Lateral Ceph: the FMA angle median value of 22° (IQR: 17–25), gonial angle median of 121° (IQR: 116–127), mandibular ramus height median value of 44 mm (IQR: 41–48 mm), and mandibular body length median value of 70 mm (IQR of 65 to 76 mm). OPG: gonial angles on the right and left sides yield medians of 121° (IQR: 116–127) and 122° (IQR: 117–127); the mandibular ramus height on the right and left sides shows medians of 44.0 mm (IQR: 40.0–47.0 mm) and 43 mm (IQR: 40–48 mm); and the mandibular body on the right side presents a median of 71 mm (IQR: 67–76 mm) and the left side has a median of 71 mm (IQR: 67–75 mm). Conclusions: The findings suggest that OPGs can be reliably used to measure the gonial angle and ramus height, providing results comparable to lateral cephalograms. However, caution should be exercised when predicting horizontal measurements from OPGs. The standardization of the OPG recording process and further research with larger sample sizes are required to establish standard panoramic norms for OPG parameters in the assessment of facial asymmetry. Full article

The aim of the current study was to evaluate the pharyngeal airway dimensions of individuals with different skeletal patterns in a cohort of the Emirati population. The specific aim was to assess the relationship between pharyngeal airway dimensions and anterior facial height in relation to different skeletal patterns. This retrospective study was conducted on a sample of 103 CBCT scans of adult Emirati subjects categorized into three groups according to their skeletal classification as indicated by the ANB angle: Class I (n = 35), Class II (n = 46), and Class III (n = 22). All CBCT scans were taken using an i-CAT CBCT imaging machine (Imaging Sciences, Hatfield, PA, USA). The age range of the patients was 19 to 68 years (62 women and 41 men). ANOVA, t-tests, Kruskal–Wallis, and Mann–Whitney tests were employed for comparing means among groups. The correlation coefficient was used to evaluate the association between variables. A p-value of less than 0.05 was considered statistically significant. This study revealed significant associations between various airway parameters and cephalometric measurements. Positive correlations were observed between nasal cavity volume and nasopharynx volume, as well as anterior facial height. Oropharynx volume exhibited positive correlations with hypopharynx volume and total airway volume, and negative correlations with overjet, ANB angle, and patient age. Hypopharynx volume correlated positively with total airway volume and the most constricted area of the airway (MCA). Total airway volume showed positive correlations with MCA and anterior facial height. MCA had negative correlations with ANB angle and patient age. Nasopharynx volume was significantly larger in the skeletal Class I group than in the Class II or Class III groups, while the other airway parameters showed no significant differences among the groups (p > 0.05). Several airway parameters showed a correlation with anterior facial height among the different skeletal patterns. Nasopharyngeal airway volume was significantly larger in the skeletal Class I group than in Class II and III groups in the studied sample. Full article

Background: The present study aimed to investigate developmental changes in the female pharyngeal airway from adolescence to adulthood, considering variations in the anatomical structures related to the airway dimensions. Methods: Lateral cephalograms of 214 females were analyzed and categorized into five developmental stages: early adolescence (10–13 years), middle adolescence (14–17 years), late adolescence (18–21 years), early adulthood (22–30 years), and middle adulthood (31–50 years). The focus of the analysis included the point A-Nasion-point B (ANB) angle, tongue pharyngeal airway space (TPS), epiglottis pharyngeal airway space (EPS), soft palate airway space (SPS), and the horizontal and vertical positions of the hyoid bone. Results: The ANB angle exhibited significant variation across groups, being significantly larger in the early-adolescence group (4.22°) compared to the middle-adolescence, late-adolescence, and early-adulthood groups. The TPS and EPS were significantly shorter in the early-adolescence group. Negative correlations were observed between the ANB angle and the lengths of the pharyngeal airway spaces (SPS, TPS, and EPS). The horizontal and vertical positions of the hyoid bone remained stable after middle adolescence. Conclusion: The maturation of the ANB angle and pharyngeal airway in females seems nearly completed during middle adolescence (14–17 years). Additionally, a significant and negative correlation was identified between the ANB angle and the lengths of various pharyngeal airway spaces (SPS, TPS, and EPS). The horizontal and vertical positions of the hyoid bone showed stability after middle adolescence. Full article

Background and Objectives: The aim of this study was to evaluate the correlation between the mandibular arch shape and the vertical skeletal pattern in growing patients. Materials and Methods: A total of 73 Caucasian patients (33 males and 40 females; mean age 9.4) were retrospectively enrolled from a pool of patients treated in chronological order at the Department of Orthodontics, University of Foggia, Italy, from April 2018 to December 2021. Each patient received a laterolateral radiograph and a digital scan of the dental arch. Eight cephalometric parameters (lower gonial angle, intermaxillary angle, divergence angle, Wits index, Jarabak ratio, OP-MP angle, PP-OP angle, and ANB) and five dental measurements (posterior mandibular arch width, anterior mandibular arch width, mandibular occlusal angle, posterior width on distobuccal molar cusps, and molar angle) were analyzed and then compared. A Spearman’s rho correlation test between the cephalometric measurements and the dental measurements was performed. Statistical significance was set at p < 0.05. Results: A negative statistically significant correlation was found between the Jarabak ratio and the intermolar angle; a statistically significant correlation was also observed between the Wits index, the posterior mandibular width, and the occlusal mandibular angle; the ANB angle and the occlusal mandibular angle; the intermaxillary angle (PP-PM) and the mandibular occlusal angle, posterior mandibular width on the disto-vestibular cusp, and the intermolar angle; and the OP-MP angle and mandibular occlusal angle and the posterior mandibular width on the disto-vestibular cusp. Conclusions: The mandibular arch form may be related to certain predisposing features in craniofacial morphology, such as jaw divergence, the Jarabak ratio, and the intermaxillary angle. Full article

Background: Cephalometric analysis is an essential tool used in orthodontic diagnosis and treatment planning. The aim of this study was to evaluate the reliability and repeatability of new cephalometric points introduced in Tau angle analysis, in contrast to the gold standard, which is the analysis of the ANB angle. For this purpose, an attempt was made to assess the repeatability and reliability of the introduction of anthropometric points by evaluating both inter- and intraobserver parameters, as well as the agreement among the orthodontists participating in the study. Methods: Repeatability and reliability assessments for all six anthropometric points (N, A, B, T, M, G) used in the analysis of the ANB and Tau angles were conducted individually by 29 orthodontists. This assessment was performed in triplicate on the day of the study, on the day following the first study, and on the seventh day after the second study. Measurement errors for the ANB and Tau angles were evaluated using the Dahlberg formula and intraclass correlation coefficients (ICCs). Results: The orthodontists in the study measured sagittal discrepancy significantly more accurately using the ANB angle compared to the Tau angle (p < 0.001). The Dahlberg error for measuring the Tau angle was three times greater than that for the ANB angle (p < 0.001). Additionally, the ICC for the Tau angle was more than 3.5 times smaller than that for the ANB angle, while the R&R error for Tau measurement was more than three times greater than that for the ANB angle (p < 0.001). Conclusions: The results of ANB angle measurements exhibit fewer errors in comparison to Tau angle measurements. Full article

Impacted canines, which play an important role in smile aesthetics and functional occlusion, can lead to dental and skeletal malocclusions. In this study the aim was to evaluate the relationship between impacted maxillary canines and malocclusion. A total of 151 patients comprising 101 females and 50 males aged between 13 and 33 years were included. The groups were divided based on age, gender, skeletal and dental classification, and sector classification. Angular and linear measurements were performed on lateral cephalometric and panoramic radiographs. In panoramic radiographs, the vertical distance of the impacted canine to the occlusal plane and the angle between it and the bicondylar plane were measured and sector classification was performed according to its relationship with the root of the lateral incisor. Skeletal classification was performed according to the ANB angle on lateral cephalometric radiographs and dental classification by molar relationship via the intraoral photographs. The Chi-square test analyzed independent qualitative and quantitative data using Kruskal–Wallis and Man–Whitney U tests. The statistical significance level was accepted as p < 0.05. According to the intraclass correlation test, an excellent positive correlation was found with 0.985 for canine distance and 0.993 for canine angle between the repeated measurements. The impaction of the maxillary right canine was significantly highest in females and lowest in males. The impacted canine angle was significantly highest in sector 1 and lowest in sector 4. Distance to the occlusal plane was significantly higher in dental Class II and sector 4. It was observed that there was a considerable relationship between impacted maxillary canines and malocclusion; bilateral impacted canines were more frequent in skeletal Class III, and the distance of impacted canines to the occlusal plane increased while their angles decreased both in dental Class II and from sectors 1 to 4. Full article