Search Results (12)

Plant U-box E3 ubiquitin ligases (PUBs) serve as crucial regulators of protein degradation and are fundamentally involved in plant developmental processes and stress response mechanisms. Despite their well-characterized roles in model plant species, the PUB gene family in the hybrid poplar (Populus alba × P. tremula var. glandulosa) remains poorly understood. By conducting a comprehensive genome-wide analysis, we identified 152 PUB genes in poplar and phylogenetically classified them into five distinct clades based on a comparative analysis with Arabidopsis thaliana and tomato PUB homologs. The structural characterization revealed that numerous PagPUB proteins possess additional functional domains, including ARM and WD40 repeats, which are indicative of potential functional diversification. Genomic distribution and synteny analyses demonstrated that the expansion of the PUB gene family predominantly resulted from whole-genome duplication (WGD) events, with evolutionary constraint analyses (Ka/Ks ratios < 1) suggesting strong purifying selection. An examination of the promoter region uncovered an abundance of stress-responsive cis-elements, particularly ABRE and MYB binding sites associated with abiotic stress and hormonal regulation. Transcriptome profiling demonstrated both tissue-specific expression patterns and dynamic regulation under diverse stress conditions, including drought, salinity, temperature extremes, and pathogen infection. Our findings provide the first systematic characterization of the PUB gene family in poplar and establish a valuable framework for elucidating their evolutionary history and functional significance in environmental stress adaptation. Full article

Background: Despite the rapid development of nanoemulsions in recent years, no method has been established for the preparation of milbemycin oxime nanoemulsions. Milbemycin oxime is a widely used macrolide antibiotic in veterinary medicine, particularly for treating parasitic infections in animals such as dogs. However, its poor solubility in water limits its bioavailability and therapeutic efficacy. Developing a nanoemulsion formulation can enhance its solubility, stability, and bioavailability, offering a more effective treatment option. Methods: In this experiment, oil-in-water (O/W) milbemycin oxime nanoemulsions were successfully prepared by the phase inversion composition (PIC) method using ethyl butyrate as the oil phase, Tween-80 as the surfactant, and anhydrous ethanol as the co-surfactant. The region of O/W nanoemulsions was identified by constructing a pseudo-ternary phase diagram and, based on this, was screened by determining the droplet size, polydispersity coefficient, and zeta potential of each preparation. Results and Conclusions: The finalized formulation had a 2:1 ratio of surfactant to co-surfactant and a 7:3 ratio of mixed surfactant to oil, and its droplet size, polydispersity index (PDI), and zeta potential were 12.140 ± 0.128 nm, 0.155 ± 0.015, and −4.947 ± 0.768 mV, respectively. Transmission electron microscopy confirmed the spherical uniform distribution of droplets, and the nanoemulsions passed thermodynamic stability tests. The in vitro release of milbemycin oxime nanoemulsions followed first-order kinetic equations. In conclusion, nanoemulsions are an interesting option for the delivery of poorly water-soluble molecules such as milbemycin oxime. Full article

The purified yeast strain H4, identified as W. anomalus through morphological, genetic, and phylogenetic analyses, was characterized and compared to a commercial Saccharomyces cerevisiae strain X16. W. anomalus H4 exhibited distinct morphological features. It demonstrated notable tolerance to 11% ethanol, 220 g/L glucose, and 200 mg/L octanoic acid, similar to X16, except for having a lower tolerance to SO₂. Survival analysis under various stress conditions revealed that ethanol and octanoic acid had the most detrimental effects, with 56% cell mortality at 13% ethanol and 400 mg/L octanoic acid. Transcriptomic analysis under octanoic acid stress showed that at 200 mg/L, 3369 differentially expressed genes (DEGs) were induced, with 1609 being upregulated and 1760 downregulated, indicating broad transcriptional reprogramming. At 400 mg/L, only 130 DEGs were detected, suggesting a more limited response. KEGG pathway analysis indicated that most DEGs at 200 mg/L were associated with the “ribosome” and “proteasome” pathways, reflecting disruptions in protein synthesis and turnover. At 400 mg/L, the DEGs were primarily related to “DNA replication” and “pyruvate metabolism”. These findings highlight the adaptive mechanisms of W. anomalus H4 to environmental stresses, particularly octanoic acid, and its potential for use in brewing and fermentation processes. Full article

On the basis of the test results of nine steel-fiber high-strength concrete corbel specimens subjected to a vertical load, the influence of the steel fiber content on the shear performance of corbels was analyzed. The softened strut-and-tie model (SSTM) was used to analyze the shear strength of steel-fiber high-strength concrete corbels, taking into consideration the shear contribution of steel fibers. A calculation model for the shear strength of steel-fiber high-strength concrete corbels is proposed, and a database for 26 steel-fiber high-strength concrete corbels was created by using the model. The results obtained according to the codes ACI318-19, EC2, CSA A23.3-19 and the softened strut-and-tie model were compared with the experimental values to verify the rationality of the model. The findings showed that steel fiber can effectively limit the crack width and improve the crack morphology. The overall average value of the ratio between the experimental and the predicted strengths of the model was 1.082, and the variance was 0.004. The values predicted with the proposed calculation model were closer to the experimental values than those calculated according to the codes. This study provides a definite mechanical model that can reveal the shear mechanism of steel-fiber high-strength concrete. It can reasonably predict the shear strength of steel-fiber high-strength concrete corbels. Full article

The regulatory role of microRNAs (miRNAs) in HBV-associated HCC pathogenesis has been reported previously. This study aimed to investigate the association between serum miR-125b and liver fibrosis progression in chronic hepatitis B (CHB) patients after nucleos(t)ide analog (NA) treatment. Baseline serum miR-125b levels and other relevant laboratory data were measured for 124 patients who underwent 12-month NA therapy. Post-12-month NA therapy, serum miR-125, platelet, AST, and ALT levels were measured again for post-treatment FIB-4 index calculation. Univariate and multivariate logistic regression analyses were performed to identify independent risk factors for a higher post-treatment FIB-4 index. Results showed that baseline miR-125b levels were inversely correlated with the post-treatment FIB-4 index (ρ = −0.2130, p = 0.0082). In logistic regression analyses, age (OR = 1.17, p < 0.0001), baseline platelet level (OR = 0.98, p = 0.0032), and ALT level (OR = 1.00, p = 0.0241) were independent predictors of FIB-index > 2.9 post-12-month treatment. The baseline miR-125b level was not significantly associated with a higher post-treatment FIB-4 index (p = 0.8992). In 59 patients receiving entecavir (ETV) monotherapy, the alternation of serum miR-125b in 12 months and age were substantially associated with a higher post-treatment FIB-4 index (>2.9), suggesting that miR-125b is a reliable biomarker for detecting early liver fibrosis under specific anti-HBV NA treatments (e.g., ETV). Full article

HCC, a leading cause of cancer-related mortality, is diagnosed at advanced stages. Although antiviral therapy has reduced the risk of HCC among chronic hepatitis C (CHC) patients, the risk of HCC remains, thus, highlighting the unmet need for continuous surveillance. Therefore, stable and cost-effective biomarkers, such as circulating microRNAs, must be identified. We aimed to clarify whether serum levels of the Let-7 family can predict HCC risk in patients with CHC using univariate and multivariate Cox’s proportional hazards model. We analyzed the sera of 54 patients with CHC who developed HCC after antiviral therapy and compared the data with those of 173 patients without HCC development. The Let-7 family (except for let-7c) exhibited significant negative correlations with the fibrosis score (r = −0.2736 to −0.34, p = 0.0002 to <0.0001). After Cox’s regression model was used to adjust for age, sex, HCV genotype, and FIB-4 ≥ 3.25, patients with CHC with let-7i median ≥ −1.696 (adjusted hazard ratio [aHR] = 0.31, 95% CI: 0.08–0.94, p = 0.0372) in the sustained virologic response (SVR) groups and ≥−1.696 (aHR = 0.09, 95% CI: 0.08–0.94, p = 0.0022) in the non-SVR group were less likely to develop HCC. Thus, circulating let-7i can be used for early CHC surveillance in patients with HCC risk after antiviral treatment. Full article

We developed an X-ray detector using 36 arrays, each consisting of a 64-pixellated yttrium oxyorthosilicate (YSO) scintillation crystal and a 64-channel multi-anode photomultiplier tube. The X-ray detector was designed to detect X-rays with energies lower than 10 keV, primarily with the aim of localizing gamma-ray bursts (GRBs). YSO crystals have no intrinsic background, which is advantageous for increasing low-energy sensitivity. The fabricated detector was integrated into UBAT, the payload of the Ultra-Fast Flash Observatory (UFFO)/Lomonosov for GRB observation. The UFFO was successfully operated in space in a low-Earth orbit. In this paper, we present the responses of the X-ray detector of the UBAT engineering model identical to the flight model, using ²⁴¹Am and ⁵⁵Fe radioactive sources and an Amptek X-ray tube. We found that the X-ray detector can measure energies lower than 5 keV. As such, we expect YSO crystals to be good candidates for the X-ray detector materials for future GRB missions. Full article

Hepatitis C virus (HCV) infections can cause permanent liver-related diseases, including hepatocellular carcinoma (HCC). Low mortality and incidence of HCC have been observed in patients with chronic hepatitis C undergoing direct-acting antiviral therapy. Tumor suppressive let-7 family members are down-regulated in HCC. The present study, therefore, aimed to investigate whether expression levels for the full spectrum of let-7 family members (let-7a, 7b, 7c, 7d, 7e, 7f, 7g, 7i, and miR-98) in the circulatory system are useful as surveillance biomarkers for liver-related diseases to monitor treatment efficacy during HCV infection. To this end, we measured the levels of mature circulating let-7 family members using quantitative reverse transcription-PCR in 236 patients with HCV infection, and 147 age- and sex-matched controls. Using hierarchical cluster analysis and principal component analysis, three clusters were obtained after measuring expression levels of let-7 family members in the patients and controls. Cluster 1 included let-7a/d/e/g, Cluster 2 comprised let-7b and let-7i, and Cluster 3 comprised let-7c/f/miR-98. Let-7b/c/g represented the three clusters and showed the best survival response to liver cancer when analyzed with respect to patient data. Therefore, considering the circulating levels of let7 b/c/g as representatives of the let-7 family may facilitate effective monitoring of liver-related disease. Full article

In recent years, high-entropy alloys have been proposed as potential hydrogen storage materials. Despite a number of experimental efforts, there is a lack of theoretical understanding regarding the hydrogen absorption behavior of high-entropy alloys. In this work, the hydrogen storage properties of a new TiZrHfScMo high-entropy alloy are investigated. This material is synthesized successfully, and its structure is characterized as body-centered cubic. Based on density functional theory, the lattice constant, formation enthalpy, binding energy, and electronic properties of hydrogenated TiZrHfScMo are all calculated. The calculations reveal that the process of hydrogenation is an exothermic process, and the bonding between the hydrogen and metal elements are of covalent character. In the hydrogenated TiZrHfScMo, the Ti and Sc atoms lose electrons and Mo atoms gain electrons. As the H content increases, the <Ti–H> bonding is weakened, and the <Hf–H> and <Mo–H> bonding are strengthened. Our calculations demonstrate that the TiZrHfScMo high-entropy alloy is a promising hydrogen storage material, and different alloy elements play different roles in the hydrogen absorption process. Full article

Silicon carbide (SiC) has been widely used for electronic radiation detectors and atomic battery sensors. However, the physical properties of SiC exposure to high-dose irradiation as well as its related electrical responses are not yet well understood. Meanwhile, the current research in this field are generally focused on electrical properties and defects formation, which are not suitable to explain the intrinsic response of irradiation effect since defect itself is not easy to characterize, and it is complex to determine whether it comes from the raw material or exists only upon irradiation. Therefore, a more straightforward quantification of irradiation effect is needed to establish the direct correlation between irradiation-induced current and the radiation fluence. This work reports the on-line electrical properties of 4H-SiC Schottky barrier diodes (SBDs) under high-dose electron irradiation and employs in situ noise diagnostic analysis to demonstrate the correlation of irradiation-induced defects and microscopic electronic properties. It is found that the electron beam has a strong radiation destructive effect on 4H-SiC SBDs. The on-line electron-induced current and noise information reveal a self-healing like procedure, in which the internal defects of the devices are likely to be annealed at room temperature and devices’ performance is restored to some extent. Full article