Search Results (85)

The hydrochemical characteristics and evolution mechanisms of groundwater are critical for accurately understanding the input–output budget of hydrochemical constituents in pristine groundwater. However, few studies have analyzed the changes in mineral precipitation and dissolution equilibrium along the groundwater flow path, especially in arid regions. This study integrated hydrochemical analysis, stable isotopes, and inverse hydrochemical modeling to identify groundwater recharge sources, hydrochemical evolution, and controlling mechanisms in an arid endorheic watershed, northwestern China. A stable isotope signature indicated that groundwater is primarily recharged by high-altitude meteoric precipitation and glacial snowmelt. The regional hydrochemical type evolved from HCO₃·Cl-Ca·Mg·Na types in phreatic aquifers to more complex HCO₃·Cl-Ca·Mg Na and HCO₃·Cl-Na Mg types in confined aquifers and a Cl-Mg·Na type in high-salinity groundwater. The dissolution of halite, gypsum, calcite, K-feldspar, and albite was identified as the primary source of dissolved substances and a key factor controlling the hydrochemical characteristics. Meanwhile, hydrochemical evolution is influenced by cation exchange, mineral dissolution–precipitation, and carbonate equilibrium mechanisms. Inverse hydrochemical modeling demonstrated that high-salinity groundwater has experienced intensive evaporation and quantified the transfer amounts of associated minerals. This study offers deeper insight into hydrochemical evolution in the Golmud River watershed and elucidates mineral transport and enrichment mechanisms, providing a theoretical basis for investigating hydrochemical metallogenic processes. Full article

Bovine mastitis is a condition typically induced by various pathogens, with Escherichia coli (E. coli) being a common causative agent known for its propensity to cause persistent infections. In experimental models of bovine mastitis, lipopolysaccharide (LPS), a key component of the E. coli cell wall, is frequently employed as an inducer. The extracellular matrix (ECM) is regulated by MMPs, TIMPs, and the uPA system. They collectively participate in ECM degradation and remodeling and have been identified as promising targets for mastitis treatment. However, investigations into the precise mechanisms underlying E. coli and LPS-induced mastitis, as well as the relationship between bovine mastitis and the MAPK signaling pathway, remain limited. In this study, bovine mammary epithelial cells (BMECs) were treated in vitro with 10⁶ CFU/mL heat-inactivated E. coli, 7.5 µg/mL LPS, or a combination of both. The treatments resulted in varying degrees of activation of the MAPK signaling pathway, specifically ERK1/2, JNK, and P38. BMECs were exposed to MAPK inhibitors (the JNK inhibitor SP600125, the ERK inhibitor PD98059, and the P38 inhibitor SB203580) after treatments with heat-inactivated E. coli (10⁶ CFU/mL), LPS (7.5 µg/mL), or a combination of the two for 6, 12, 24, and 48 h. The mRNA and protein levels of MMP-1, MMP-2, MMP-3, MMP-9, MMP-13, TIMP-1, TIMP-2, uPA, uPAR, and PAI-1 were assessed using RT-qPCR and Western blot analysis. The findings indicated that heat-inactivated E. coli and LPS stimulated the expression of MAPK mRNAs (ERK1/2, P38, and JNK) in BMECs, along with corresponding increases in the phosphorylated proteins. Furthermore, MAPK inhibitors substantially upregulated the expression of TIMP-1, TIMP-2, and PAI-1. However, no significant changes were observed in the mRNA and protein levels of MMP-1, MMP-2, MMP-3, MMP-9, MMP-13, uPA, or uPAR. In conclusion, heat-inactivated E. coli and LPS can activate the MAPK signaling pathway in BMECs. Inhibiting this signaling pathway can modulate the expression of TIMP-1, TIMP -2, and PAI-1 at both mRNA and protein levels. Full article

The urgency of reducing pollution and developing clean energy storage requires efficient photocatalytic hydrogen evolution (PHE) tactics. To improve solar conversion efficiency, it is highly imperative to accelerate the photocarriers separation and transport through materials design. A stable hydrogen evolution photocatalyst based on TpPa-COFs (triformylphloroglucinol phenylenediamine covalent organic frameworks) was developed by a molecular-level design strategy. The study successfully introduced a molecular-scale Ir active site onto the surface of TpPa-COFs via coordination bonds. It verified the structural integrity of TpPa-COFs and the existence of Ir through the basic structural characterizations, such as Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). After the Ir-based coordination compound joining, the absorption edge of TpPa-COF-M1 and TpPa-COF-M2 was extended to 750 nm. The TpPa-COF + M1 exhibited the highest photocatalytic H₂ evolution rate of 662 µmol/h (10 mg catalyst) under visible-light (λ ≥ 420 nm) irradiation. The apparent quantum yield (AQY) of TpPa-COF-M1 is calculated to be 1.9%, 3.8%, 4.8%, 2.8%, 1.8%, and 0.3% at monochromatic wavelengths of 420, 450, 470, 500, 550, and 600 nm, respectively. Our findings confirm that the molecular-level design of photocatalysts can effectively boost performance and reduce cost in photocatalytic reactions and provide an important strategy for designing efficient photocatalysts. Full article

The application of walnut protein isolate (WPI) and polyphenols is usually limited by low solubility. To solve the above problem, the impact of the alkaline treatment method and the ultrasound-assisted alkaline treatment method on the structural and functional properties of protein–polyphenol covalent complexes (WPI–(–)-epigallocatechin-3-gallate (EGCG), UWPI–EGCG, respectively) was explored. Fourier transform infrared spectroscopy and fluorescence spectroscopy indicated that the covalent binding of EGCG to WPI altered the secondary and tertiary structures of the protein and increased its random coil content. In addition, the UWPI–EGCG samples had the lowest particle size (153.67 nm), the largest absolute zeta potential value (25.4 mV), and the highest polyphenol binding (53.37 ± 0.33 mg/g protein). Meanwhile, WPI–EGCG covalent complexes also possessed excellent solubility and emulsification properties. These findings provide a promising approach for WPI in applications such as functional foods. Full article

The ethylene response factor (ERF) family is a prominent plant-specific transcription factor family, which plays a crucial role in modulating plant growth and stress tolerance. In this study, a total of 210 ERFs were identified in Populus trichocarpa, comprising 29 AP2 (APETALA2) subfamily members, 176 ERF subfamily members, and 5 RAV (related to ABI3/VP1) subfamily members. The duplication events of the PtERF family members exclusively occurred within the subfamilies. A total of 168 duplication pairs were found among 161 PtERF genes, and all of them were fragment duplications. Gene structure analysis revealed that most ERF subfamily members only had one exon without introns, the AP2 subfamily members had six or more introns and exons, and RAV subfamily members lacked introns except for PtERF102. Considerable cis-acting elements associated with plant growth and development, stress response, hormone response, and light response were detected in the promoters of PtERF genes. The expression levels of PtERFs were highest in roots across tissues and in winter among seasons. Furthermore, the nitrate and urea stimulated the expression of PtERF genes. The co-expression network analysis based on PtERFs indicated their potential roles in hormone signaling, acyltransferase activity, and response to chemicals. This study provides novel insights into investigating the role of PtERFs in environmental stress in poplar species. Full article

Objective: Intrahepatic cholestasis of pregnancy (ICP) is associated with an elevated risk of adverse perinatal outcomes, including perinatal morbidity and mortality. The objectives of this study were to evaluate the bile acid (BA) metabolism profiles in the urine of patients with ICP and to investigate the association between specific BAs and maternal and neonatal outcomes in patients with ICP. Methods: A total of 127 Chinese women with ICP and 55 healthy pregnant women were enrolled in our retrospective study. Spot urine samples and clinical data were collected from pregnant women from January 2019 to December 2022 at the First Affiliated Hospital of Chongqing Medical University, Chongqing. Based on total bile acid (TBA) levels, the ICP group was subdivided into mild (10–40 μmol/L) and severe (≥40 μmol/L) ICP groups. Patients in the ICP group were further divided into two categories according to neonatal outcomes: an ICP with adverse pregnancy outcomes group and an ICP with non-adverse pregnancy outcomes group. Metabolites from maternal urine were collected and analyzed using ultra-high-performance liquid chromatography–triple quadrupole time-of-flight mass spectroscopy (UPLC-triple TOF-MS). Results: Significant differences were observed between the mild and severe ICP groups in the onset time of symptoms, gestational weeks at time of ICP diagnosis, the duration of using ursodeoxycholic acid (UDCA) drugs during pregnancy, gestational age at delivery, premature delivery, and cesarean delivery. The expression levels of the composition of different urinary bile acids including THCA, TCA, T-ω-MCA, TCA-3-S, TCDCA-3-S, TDCA-3-S, GCDCA-3-S, DCA-3-G and GDCA-3-G were remarkably higher in the ICP with adverse pregnancy outcomes group than those in the ICP with non-adverse pregnancy outcomes group and the control group. The single-parameter model used to predict adverse pregnancy outcomes in ICP had similar areas under the curve (AUCs) of the receiver operating characteristic (ROC), ranging from 0.755 to 0.869. However, an AUC of 0.886 and 95% CI were obtained by the index of combined urinary bile acids in multiple prediction models (95% CI 0.790 to 0.983, p < 0.05). TCA-3-S in the urinary bile acids had a strong positive correlation with the aspartate aminotransferase (AST) level (r = 0.617, p < 0.05). Furthermore, TCDCA-3-S and GCDCA-3-S in the urinary bile acids had a strong positive correlation with the alanine aminotransferase (ALT) level (r = 0.607, p < 0.05; r = 0.611, p < 0.05) and AST level (r = 0.629, p < 0.05; r = 0.619, p < 0.05). Conclusions: Maternal urinary bile acid profiles were prominent for the prognosis of maternal and neonatal outcomes of ICP. Elevated levels of TCA-3-S, TCDCA-3-S, and GCDCA-3-S in urine might be important predictors for indicating adverse pregnancy outcomes in ICP. Full article

To investigate the influence of the in situ stress on the damage characteristics and fracture patterns of sandstone, this study designed a confining pressure loading device that simulates a deep high in situ stress environment. It allows for the coupled loading of blasting stress and in situ stress on rock specimens. Based on this, experimental research on three-dimensional rock blasting was conducted. A segmental analysis method was then applied, dividing the sandstone into stemming, charge, and bottom segments to refine the study. Using CT scanning, three-dimensional reconstruction, multifractal methods, and SEM scanning technology, the damage characteristics and failure modes of sandstone under the coupling of blasting stress and in situ stress were investigated from macroscopic, mesoscopic, and microscopic perspectives. The experimental research indicates that, under in situ stress, the rock’s ability to resist the effects of blasting stress waves and blasting gas is enhanced. With increasing in situ stress, the overall damage level of sandstone specimens gradually decreases and the damage characteristics in different segments of the specimen show significant variation. Under the same in situ stress, the damage level of the sandstone specimen decreases as the axial position shifts from the stemming segment to the charge segment, and then to the bottom segment. Additionally, with increasing in situ stress, shear fractures increase, the blasting fracture surfaces become progressively rougher, and the microscopic fractures in the sandstone transition from brittle cleavage fractures to brittle–plastic quasi-cleavage fractures. In some areas, the energy is insufficient to penetrate the grain boundaries, leading to a transition from transgranular fractures to coupled fractures and intergranular fractures. Full article

Microplastics (MPs) can serve as vectors for heavy metals in aquatic environments; however, the adsorption behavior of MPs on multiple heavy metal systems is still unclear. This study investigated the adsorption characteristics of biodegradable poly (butylene succinate) (PBS) for cadmium (Cd(II)) and arsenic (As(III)) in both single and binary systems. Adsorption isotherms were studied using the Linear, Langmuir, and Freundlich models, and further analysis of MPs adsorption characteristics was conducted using site energy distribution theory and density functional theory. The results indicate that the maximum adsorption capacities of PBS for Cd(II) and As(III) are 2.997 mg/g and 2.606 mg/g, respectively, with the Freundlich model providing the best fit, suggesting multilayer adsorption on heterogeneous sites. As(III) has a higher adsorption affinity for PBS than Cd(II), with a binding energy of −11.219 kcal/mol. Additionally, the adsorption mechanisms of Cd(II) and As(III) on PBS include electrostatic interactions and surface complexation, with the primary adsorption sites at the C=O of the carboxyl group and the hydroxyl group. The comprehension of interfacial interactions between biodegradable plastics and heavy metals is facilitated by a combination of theoretical calculations and experimental investigations. Full article

Rosemary (Salvia rosmarinus) is a world-famous plant frequently subjected to various environmental stresses. Heat Shock Transcription Factor (HSF) has been shown to be essential for plant growth and for resistance to environmental stresses. This study utilized bioinformatics techniques to identify the SrHSF gene family in the rosemary genome. A total of 49 SrHSFs were detected, unevenly distributed across 12 chromosomes. The SrHSF genes were classifiable into 3 subfamilies and contained in 14 subgroups. They were relatively conserved during the evolutionary process based on gene structure and conserved motif analysis. There were 22 kinds of cis-acting elements in the promoter regions of SrHSF genes, mostly related to hormones, stress, growth, and development. The interactions among 16 highly conserved SrHSF proteins were also identified. Gene collinearity analysis showed that 51 segmental duplication events were undergone among 41 SrHSF genes. Ka/Ks ratios were all less than 1, suggesting a purifying selection of SrHSF homologous genes. The expression pattern of SrHSF genes revealed that the majority of them are highly expressed in the secondary stems. After 0.1% MeJA treatment, SrHSF36 and SrHSF11 showed a significant upregulation in leaves. This research provides valuable insights into the functions and regulatory mechanisms of the SrHSF gene family. Full article

Objective: Postpartum depression (PPD) is a common complication after childbirth. Weight misperception can lead to self-esteem issues and mental health problems, especially in women and adolescents. The aim of this study was to investigate the association between weight perception before and during pregnancy and the status of PPD in Southern China. Methods: From October 2021 to November 2023, a multi-stage sampling method was used to recruit 2169 eligible mothers aged 18–49 who had delivered live-born singleton infants within 3 to 180 days postpartum. Anthropometric measurements and face-to-face questionnaire surveys were conducted to collect data. The Kappa test was used to assess the agreement between actual and perceived weight. The generalized linear model incorporating multiplicative interaction analysis was applied to explore the associations among variables. Results: The prevalence of PPD status was 18.0%. Among women, 35.2% perceived their pre-pregnancy weight (PPW) as abnormal, while 33.1% perceived their gestational weight gain (GWG) as inappropriate. There was poor agreement between maternal actual and perceived PPW/GWG (Kappa = 0.366, p < 0.001; Kappa = 0.188, p < 0.001), with 27.8% of women misperceiving their PPW and 52.1% misperceiving their GWG. The results of the general linear model indicated that women who perceived their PPW as underweight (β = 0.70, p = 0.016) or overweight/obese (β = 0.86, p < 0.001), as well as those who perceived their GWG as excessive (β = 0.47, p = 0.028) were more likely to exhibit PPD status. The interaction analysis results showed that those who perceived their PPW as underweight and their GWG as insufficient (β = 1.75, p = 0.020), as well as those who perceived their PPW as overweight/obese and their GWG as excessive (β = 0.90, p = 0.001) had a positive interactive effect on the occurrence of PPD status, while underestimating PPW and GWG may be a protective factor against PPD status (β = −1.03, p = 0.037). Conclusion: These findings support that maternal weight perception plays a role in the development of PPD status. Further improvement is needed in personalized health education for weight management, both prior to and throughout the pregnancy period. This can help women reduce weight anxiety, better understand their body image, and potentially lower the risk of developing PPD. Full article

The circumpolar Taiga–Tundra Ecotone significantly influences the feedback mechanism of global climate change. Achieving large-scale individual tree crown (ITC) extraction in the transition zone is crucial for estimating vegetation biomass in the transition zone and studying plants’ response to climate change. This study employed aerial images and airborne LiDAR data covering several typical transitional zone regions in northern Finland to explore the ITC delineation method based on deep learning. First, this study developed an improved multi-scale ITC delineation method to enable the semi-automatic assembly of the ITC sample collection. This approach led to the creation of an individual tree dataset containing over 20,000 trees in the transitional zone. Then, this study explored the ITC delineation method using the Mask R-CNN model. The accuracies of the Mask R-CNN model were compared with two traditional ITC delineation methods: the improved multi-scale ITC delineation method and the local maxima clustering method based on point cloud distribution. For trees with a height greater than 1.3 m, the Mask R-CNN model achieved an overall recall rate ($A_r$) of 96.60%. Compared to the two conventional ITC delineation methods, the $A_r$ of Mask R-CNN showed an increase of 1.99 and 5.52 points in percentage, respectively, indicating that the Mask R-CNN model can significantly improve the accuracy of ITC delineation. These results highlight the potential of Mask R-CNN in extracting low trees with relatively small crowns in transitional zones using high-resolution aerial imagery and low-density airborne point cloud data for the first time. Full article

The wheel hub is an important component of the wheel, and a good hub design can significantly improve vehicle handling, stability, and braking performance, ensuring safe driving. This article optimized the hub structure through morphological aspects, where reducing the hub weight contributed to enhanced fuel efficiency and overall vehicle performance. By referencing honeycombed structures, a bionic hub design is numerically simulated using finite element analysis and response surface optimization. The results showed that under the optimization of the response surface analytical model, the maximum stress of the optimized bionic hub was 109.34 MPa, compared to 119.77 MPa for the standard hub, representing an 8.7% reduction in maximum stress. The standard hub weighs 34.02 kg, while the optimized hub weight was reduced to 29.89 kg, a decrease of 12.13%. A fatigue analysis on the optimized hub indicated that at a stress of 109.34 MPa, the minimum load cycles were 4.217 × 10⁵ at the connection point with the half-shaft, meeting the fatigue life requirements for commercial vehicle hubs outlined in the national standard GB/T 5334-2021. Full article

Natural rubber produced by the rubber tree is a vital industrial raw material globally. Seven SCAMP gene family members were identified in the rubber tree, and the phylogenetic tree classified HbSCAMPs into three subfamilies. Significant differences were observed among HbSCAMPs in terms of gene length, number of exons, and composition of conserved motifs. The expansion of HbSCAMPs in the rubber tree genome is associated with segmental duplications. The high expression of HbSCAMP1–6 in petioles and HbSCAMP7 in stem tips, along with their distinct responses to drought, salt, and wound stresses, indicates their crucial roles in substance transport and stress adaptation. Transgenic poplar experiments demonstrated that overexpression of HbSCAMP3 significantly promotes plant height growth, with localization in the tobacco plasma membrane, suggesting its involvement in regulating plant growth through membrane transport processes. These findings enhance the understanding of HbSCAMPs in rubber trees and provide new insights into how plants finely tune gene family members to adapt to environmental changes. Full article

Inter-basin water transfer projects, such as the Yellow River to Qingdao Water Diversion Project (YQWD), are essential for addressing water scarcity, but impact local aquatic ecosystems. This study investigates the seasonal characteristics of eukaryotic microbial communities in the Jihongtan Reservoir, the main water-receiving body of YQWD, over a one-year period using 18S rDNA amplicon sequencing. The results showed that the eukaryotic microbial diversity did not exhibit significant seasonal variation (p > 0.05), but there was a notable variance in the community structure (p < 0.05). Arthropoda and Paracyclopina, representing the most dominant phylum and the most dominant genus, respectively, both exhibited the lowest abundance during the winter. The Chlorophyta, as the second-dominant phylum, demonstrates its higher abundance in the spring and winter. The Mantel test and PLS-PM (Partial Least Squares Path Modeling) revealed that water temperature (WT), dissolved oxygen (DO), and pH influenced the seasonal dynamic of eukaryotic microbial communities significantly, of which WT was the primary driving factor. In addition to environmental factors, water diversion is likely to be an important influencing factor. The results of the co-occurrence network and robustness suggested that the spring network is the most complex and exhibits the highest stability. Moreover, keystone taxa within networks have been identified, revealing that these key groups encompass both abundant and rare species, with specificity to different seasons. These insights are vital for understanding the seasonal variation of microbial communities in the Jihongtan Reservoir during ongoing water diversions. Full article

In recent years, a wide variety of high-performance and versatile nanofiber membranes have been successfully created using different electrospinning methods. As vehicles for medication, they have been receiving more attention because of their exceptional antibacterial characteristics and ability to heal wounds, resulting in improved drug delivery and release. This quality makes them an appealing choice for treating various skin conditions like wounds, fungal infections, skin discoloration disorders, dermatitis, and skin cancer. This article offers comprehensive information on the electrospinning procedure, the categorization of nanofiber membranes, and their use in dermatology. Additionally, it delves into successful case studies, showcasing the utilization of nanofiber membranes in the field of skin diseases to promote their substantial advancement. Full article