Search Results (35)

Objective: We developed a targeted integration-based CHO cell platform for simultaneous antibody display and secretion, enabling a streamlined transition from antibody library screening to production without requiring the re-cloning of antibody genes. Methods: The platform consists of a CHO master cell line with a single-copy landing pad, a helper vector expressing FLPe recombinase, and bi-functional targeting vectors. Recombinase-mediated cassette exchange was utilized to integrate targeting vectors into the landing pad. Bi-functional vectors were designed by incorporating a minimal furin cleavage sequence (mFCS), RRKR, and various 2A peptides between the heavy chain (HC) and a membrane anchor. Results: Incomplete cleavage at the mFCS and 2A sites facilitated the expression of both membrane-bound and secreted antibodies, while mutations in the 2A peptide produced a range of display-to-secretion ratios. However, a fraction of secreted antibodies retained 2A residues attached to the HC polypeptides. Further analysis demonstrated that modifying the first five amino acids of the 2A peptide significantly influenced furin cleavage efficiency, resulting in different display-to-secretion ratios for targeting vectors containing mFCS-2A variant combinations. To overcome this, we designed nine-amino-acid FCS variants that, when placed between the HC and membrane anchor, provided a range of display-to-secretion ratios and eliminated the issue of attached 2A residues in the secreted antibodies. Vectors with lower display levels proved more effective at distinguishing cells expressing high-affinity antibodies with closely matched binding affinities. The platform also demonstrated high sensitivity in isolating high-affinity antibody-expressing cells and supported robust antibody production. Conclusion: This targeted integration-based CHO platform enables efficient, in-format screening and production of antibodies with tunable display-to-secretion profiles. It provides a powerful and scalable tool for accelerating the development of functional, manufacturable therapeutic antibodies. Full article

Cotton stalks, a major agricultural byproduct, are challenging to decompose naturally; however, they can be transformed into valuable animal feed through microbial fermentation. This study identifies Aspergillus niger HQXY as the most efficient cellulase-producing strain out of six evaluated strains, using it to ferment cotton stalks and significantly degrade cellulose and hemicellulose. By optimizing solid-state fermentation conditions via response surface methodology, the crude fiber content of the cotton stalks was reduced by 34%. A novel sequential co-fermentation approach combining Aspergillus niger with probiotics (Bacillus licheniformis, Candida utilis, and Lactobacillus casei) further enhanced the feed’s nutritional profile. The optimal results were obtained using a 1:1:1 ratio of strains (Aspergillus niger, Bacillus licheniformis, and Lactobacillus casei) at a 8% inoculation rate over 30 days. This co-fermentation strategy lowered the pH and reduced gossypol to 15.5 mg·kg⁻¹. The findings highlight the effectiveness of Aspergillus niger HQXY and probiotics in improving the quality of cotton stalks, by reducing crude fiber and gossypol content, thus offering a promising method for the sustainable utilization of agricultural waste as high-quality animal feed. Full article

Background: B-cell maturation antigen (BCMA)-targeted T cell-redirecting immunotherapies, including Chimeric Antigen Receptor (CAR) T-cell therapy and T-cell engagers have demonstrated remarkable success in treating relapsed/refractory (RR) multiple myeloma (MM), a malignancy of plasma cells. However, a significant challenge is the severe side effects associated with T-cell overactivation, leading to cytokine release syndrome and neurotoxicity in MM patients undergoing such therapies. Bispecific NK cell engagers (NKCEs) may offer a promising alternative by redirecting NK cell cytotoxic activity towards tumor cells without triggering cytokine release syndrome. Methods: In this study, we designed a series of BCMA × CD16 NKCEs that simultaneously engage BCMA and CD16 on MM and NK cells, respectively. We evaluated the functionality of these NKCEs in vitro with respect to their molecular design. Results: Our results indicate that the format design of NKCEs influences their functionalities, underscoring the importance of format selection in optimizing NKCE-based therapies for MM. This study provides valuable insights for developing next-generation NKCEs and advancing therapeutic strategies for MM and potentially other malignancies. Full article

A heat recovery coke oven (HRCO) is one of important approaches to achieving a carbon peak and carbon neutrality in China. However, the steady operation of an HRCO is significantly influenced by the internal working conditions and the quality of lining refractories. In this work, a comprehensive study of the internal working conditions of an HRCO was carried out. The results suggest that the partition wall (PW) between the carbonization and combustion chambers is the most vulnerable area, with the corresponding traditional silica bricks inadequate for the service requirements. A reference based on a comparison of the average thermal stress and high-temperature compressive strength is offered for evaluating and selecting silica bricks for the PW. New optimized silica bricks within the reference are verified to be more applicable to the actual working conditions of an HRCO than the traditional silica bricks. As such, this work provides valuable guidance for the optimization and selection of silica bricks for the PW in an HRCO. Full article

In recent years, the incidence of bone defects has been increasing year by year. Bone transplantation has become the most needed surgery after a blood transfusion and shows a rising trend. Three-dimensional-printed implants can be arbitrarily shaped according to the defects of tissues and organs to achieve perfect morphological repair, opening a new way for non-traumatic repair and functional reconstruction. In this paper, strontium-doped mineralized collagen was first prepared by an in vitro biomimetic mineralization method and then polylactic acid was homogeneously blended with the mineralized collagen to produce a comprehensive bone repair scaffold by a gas extrusion 3D printing method. Characterization through scanning electron microscopy, X-ray diffraction, and mechanical testing revealed that the strontium-functionalized composite scaffold exhibits an inorganic composition and nanostructure akin to those of human bone tissue. The scaffold possesses uniformly distributed and interconnected pores, with a compressive strength reaching 21.04 MPa. The strontium doping in the mineralized collagen improved the biocompatibility of the scaffold and inhibited the differentiation of osteoclasts to promote bone regeneration. This innovative composite scaffold holds significant promise in the field of bone tissue engineering, providing a forward-thinking solution for prospective bone injury repair. Full article

The use of AgNO₃-polyvinyl alcohol (PVA) ink and oxygen plasma to form conductive coatings on plastic substrates was studied. It was found that oxygen plasma can decompose silver complexes to form metallic silver without high-temperature heating. The AgNO₃-PVA ratio and plasma parameters (time, power) were optimized to obtain uniform conductive coatings. The morphology and electrical characteristics of the coatings were evaluated. Composite coatings with high reflectivity and good adhesion were prepared with a resistivity of 1.66 × 10⁻⁶ Ω·m using MOD inks with a silver ion mass fraction of 5%, after 300 W plasma treatment of the PET substrate for 2 min (the chamber temperature was 37.3 °C). These results demonstrate the potential feasibility of silver MOD inks and oxygen plasma treatment for the production of silver connectors, electromagnetic shielding films, and antimicrobial coatings on low-cost plastic substrates. Full article

The relationship between the spatial structure of shelter forests and the diversity of understory herbaceous plants in desert–oasis ecotones is important for maintaining biodiversity indices and protecting the oasis ecosystem. In this paper, we explore the coupling relationship between tree layer structure (competition index, angle scale, neighborhood comparison, DBH, etc.) and understory herb diversity in the transition zone of shelter forest plots near oases and near deserts; in addition, we also aim to elucidate the dominant stand structure factors affecting herb biodiversity. The results indicated the following: A total of 13 herbaceous plant species were discovered in the transitional zone, with 11 species found near the oasis area and 4 species near the desert region. The Shannon, Simpson, and Pielou indices of understory herbaceous plants were significantly higher near the oasis area compared to the desert region. The Margalef index mean was higher in the oasis area compared to the desert region. Pearson and canonical correlation analyses revealed significant associations between specific stand structure indicators and diversity in the herbaceous layer. The results of the multiple linear regression analysis revealed that the competition index had a significant impact on the Shannon, Simpson, and Pielou diversity indices of the herbaceous layer in the understory of the shelterbelt forest near the oasis, with corresponding impact coefficients of 0.911, 0.936, and 0.831, respectively. The mingling degree was found to be the primary influencing factor for the Margalef index, with an impact coefficient of 0.825. However, in the understory of the shelterbelt forest near the desert, the neighborhood comparison ratio negatively affected the Shannon and Margalef indices, with impact coefficients of −0.634 and −0.736, respectively. Additionally, tree height negatively impacted the Simpson and Pielou indices, with impact coefficients of −0.645 and −0.677, respectively. In order to enhance the diversity of understory herbaceous species in the transitional zone and preserve the ecological system of the oasis, specific modifications to the forest structure and arrangement are essential. Pruning and thinning are necessary for shelterbelt forests located near desert regions, while shelterbelt forests near oases should use a suitable mix of tree species. These measures can help preserve or enhance the diversity of understory herbaceous plants. Full article

Two doses of the inactivated influenza vaccine (IIV) are generally recommended for children under 9 years old. This study assessed the necessity for a second dose of quadrivalent IIV (IIV4) in children aged 3–8 years. In this randomized, open-label, paralleled-controlled study, 400 children aged 3–8 years who were vaccine-unprimed were randomly assigned at a 1:1 ratio to receive a two-dose (Group 1) or one-dose (Group 2) regimen of IIV4, and 200 who were vaccine-primed received one dose of IIV4 (Group 3). A serum sample was collected before and 28 days after the last dose to determine the hemagglutination inhibition (HI) antibody level. Adverse events were collected within 28 days after each dose. One-dose or two-doses of IIV4 were well tolerated and safe in children aged 3–8 years, and no serious adverse events related to the vaccine were reported. The seroconversion rates (SCRs) of HI antibody ranged from 61.86% to 95.86%, and the post-vaccination seroprotection rates (SPRs) were all >70% in three groups against the four virus strains. The two-dose regimen in vaccine-unprimed participants (Group 1) achieved similar SPRs in comparison with the one-dose in the vaccine-primed group (Group 3), and the SPRs in Group 1 and Group 3 were higher in vaccine-unprimed participants of the one-dose regimen (Group 2). The present study supports the recommendations of a two-dose regimen for IIV4 use in children aged 3–8 years. Full article

The Lightning Mapping Imager (LMI) onboard the Fengyun-4A (FY-4A) satellite is the first independently developed satellite-borne lightning imager in China. It enables continuous lightning detection in China and surrounding areas, regardless of weather conditions. The FY-4A LMI uses a Charge-Coupled Device (CCD) array for lightning detection, and the accuracy of lightning positioning is influenced by cloud top height (CTH). In this study, we proposed an ellipsoid CTH parallax correction (ECPC) model for lightning positioning applicable to FY-4A LMI. The model utilizes CTH data from the Advanced Geosynchronous Radiation Imager (AGRI) on FY-4A to correct the lightning positioning data. According to the model, when the CTH is 12 km, the maximum deviation in lightning positioning caused by CTH in Beijing is approximately 0.1177° in the east–west direction and 0.0530° in the north–south direction, corresponding to a horizontal deviation of 13.1558 km, which exceeds the size of a single ground detection unit of the geostationary satellite lightning imager. Therefore, it is necessary to be corrected. A comparison with data from the Beijing Broadband Lightning Network (BLNET) and radar data shows that the corrected LMI data exhibit spatial distribution that is closer to the simultaneous BLNET lightning positioning data. The coordinate differences between the two datasets are significantly reduced, indicating higher consistency with radar data. The correction algorithm decreases the LMI lightning location deviation caused by CTH, thereby improving the accuracy and reliability of satellite lightning positioning data. The proposed ECPC model can be used for the real-time correction of lightning data when CTH is obtained at the same time, and it can be also used for the post-correction of space-based lightning detection with other cloud top height data. Full article

In this paper, sodium alginate (NaAlg) was used as functional monomers, bovine serum albumin (BSA) was used as template molecules, and calcium chloride (CaCl₂) aqueous solution was used as a cross-linking agent to prepare BSA molecularly imprinted carboxylated multi-wall carbon nanotubes (CMWCNT)/CaAlg hydrogel films (MIPs) and non-imprinted hydrogel films (NIPs). The adsorption capacity of the MIP film for BSA was 27.23 mg/g and the imprinting efficiency was 2.73. The MIP and NIP hydrogel film were loaded on the surface of the printed electrode, and electrochemical performance tests were carried out by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) using the electrochemical workstation. The loaded MIP film and NIP film effectively improved the electrochemical signal of the bare carbon electrode. When the pH value of the Tris HCl elution solution was 7.4, the elution time was 15 min and the adsorption time was 15 min, and the peak currents of MIP-modified electrodes and NIP-modified electrodes reached their maximum values. There was a specific interaction between MIP-modified electrodes and BSA, exhibiting specific recognition for BSA. In addition, the MIP-modified electrodes had good anti-interference, reusability, stability, and reproducibility. The detection limit (LOD) was 5.6 × 10⁻⁶ mg mL⁻¹. Full article

Object detection in low-light scenarios has been widely acknowledged as a significant research area in the field of computer vision, presenting a challenging task. Aiming at the low detection accuracy of mainstream single-stage object detection models in low-light scenarios, this paper proposes a detection model called DK_YOLOv5 based on YOLOv5, specifically designed for such scenarios. First, a low-light image enhancement algorithm with better results is selected to generate enhanced images that achieve relatively better visual effects and amplify target features. Second, the SPPF layer is improved to an R-SPPF module with faster inference speed and stronger feature expression ability. Next, we replace the C3 module with the C2f module and incorporate an attention mechanism to develop the C2f_SKA module, enabling richer gradient information flow and reducing the impact of noise features. Finally, the model detection head is replaced with a decoupled head suitable for the object detection task in this scenario to improve model performance. Additionally, we expand the Exdark dataset to include low-light data of underground mine scenario targets, named Mine_Exdark. Experimental results demonstrate that the proposed DK_YOLOv5 model achieves higher detection accuracy than other models in low-light scenarios, with an mAP0.5 of 71.9% on the Mine_Exdark dataset, which is 4.4% higher than that of YOLOv5. Full article

Green emitting long afterglow phosphor SrAl₂O₄: Eu²⁺, Dy³⁺ was synthesized via the combustion method. The physical phase analysis was carried out by X-ray diffraction, the results show that the introduction of Eu²⁺ into the lattice of the matrix resulted in a broad green emission centered at 508 nm, which is ascribed to the characteristic 4f⁶5d¹ to 4f⁷ electronic dipole allowed transition of Eu²⁺ ions. The doping of Eu²⁺ and Dy³⁺ did not change the physical phase of the crystals. Dy³⁺, as a coactivator, does not emit light itself, but can generate holes to form a trap energy level, which acts as an electron trap center to capture some of the electrons generated by the excitation of Eu²⁺. After excitation has ceased, let them gradually to transfer to the ground state for long afterglow luminescence. Then, we investigate the optical characterizations of different samples excited by X-ray. We found that SrAl₂O₄: Eu²⁺, 0.5% Dy³⁺ has this higher luminous intensity and afterglow. Its fluorescence lifetime is about 720 ns, and its quantum yield can reach 15.18%. Through search engine marketing (SEM) and energy dispersive X-ray spectroscopy (EDX), it has been proved that the sample has been successfully synthesized and its component content has been confirmed. The Eg value calculated from the diffuse reflectance spectrum is 4.61eV. The prepared SrAl₂O₄: Eu²⁺, Dy³⁺ luminescent powder is combined with Polydimethylsiloxane substrate for anticounterfeiting application, which provides a novel idea and method for the development of the anticounterfeiting field. Full article

In order to understand the effects of drawing velocity, initial grain size and texture on the microstructure evolution during directional annealing, a cellular automata model based on grain boundary (GB) curvature, GB energy and GB mobility was established with a modified calculation model of the GB curvature. The simulation results show that there is a lower limit and an upper limit to the drawing velocity for the formation of columnar grains, and the columnar grains can only be formed between the upper limit and the lower limit. The simulation results are consistent with the experimental results. When the drawing velocity is lower than the lower limit, the equiaxed grains grow at the front of the hot zone, which hinders the formation of the columnar grains. With the increase of initial grain size, the driving force of GB migration decreases, and the grain boundaries are difficult to move with the hot zone, which is not conducive to the formation of columnar grains. There is an upper limit of initial grain size for the formation of columnar grains. The abnormal growth induced by texture prevents the growth of columnar grains during directional annealing. The weaker the texture strength, the more conducive to the growth of columnar grains. Full article

Malus is an economically important plant that is widely cultivated worldwide, but it often encounters saline–alkali stress. The composition of saline–alkali land is a variety of salt and alkali mixed with the formation of alkaline salt. Hydrogen sulfide (H₂S) has been reported to have positive effects on plant responses to abiotic stresses. Our previous study showed that H₂S pretreatment alleviated the damage caused by alkaline salt stress to Malus hupehensis Rehd. var. pingyiensis Jiang (Pingyi Tiancha, PYTC) roots by regulating Na⁺/K⁺ homeostasis and oxidative stress. In this study, transcriptome analysis was used to investigate the overall mechanism through which H₂S alleviates alkaline salt stress in PYTC roots. Simultaneously, differentially expressed genes (DEGs) were explored. Transcriptional profiling of the Control-H₂S, Control-AS, Control-H₂S + AS, and AS-H₂S + AS comparison groups identified 1618, 18,652, 16,575, and 4314 DEGs, respectively. Further analysis revealed that H₂S could alleviate alkaline salt stress by increasing the energy maintenance capacity and cell wall integrity of M. hupehensis roots and by enhancing the capacity for reactive oxygen species (ROS) metabolism because more upregulated genes involved in ROS metabolism and sulfur-containing compounds were identified in M. hupehensis roots after H₂S pretreatment. qRT-PCR analysis of H₂S-induced and alkaline salt-response genes showed that these genes were consistent with the RNA-seq analysis results, which indicated that H₂S alleviation of alkaline salt stress involves the genes of the cell wall and sulfur-containing compounds in PYTC roots. Full article

A simple and novel method for the deposition of polypyrrole (PPy) and cellulose nanocrystal (CNC) composites on different fiber substrates by reactive ink-jet printing was proposed. PPy/CNCs composites were successfully prepared, and the surface resistance of conductive layer deposited on different fiber substrates is the least when the monomer concentration is 0.6 M. PPy/CNCs were deposited on polyethylene terephthalate (PET) to form a conductive layer by adding polyvinyl alcohol (PVA), and the optimum sintering temperature is 100 °C (monomer/PVA ratio 4.0, conductivity 0.769 S cm⁻¹). The PPy/CNCs conductive layer deposited on the paper has the lowest surface resistance and the best adhesion, and the surface resistance of PPy/CNCs conductive layer decreases first and then increases with the increase of sulfonate concentration. Moreover, the volume of anion in sulfonate will affect the arrangement and aggregation of PPy molecular chain in composite materials. Appropriate sulfonate doping can improve the conductivity and stability of conductive paper, and the maximum conductivity is 0.813 S cm⁻¹. Three devices based on PPy/CNCs conductive paper were proposed and fabricated. Therefore, this ink-jet printing provides a new method for the preparation of conductive materials, sensors, energy storage and electromagnetic shielding, etc. Full article