Search Results (37)

Malignant mesothelioma (MM) is a highly aggressive cancer strongly associated with asbestos exposure, and accumulating evidence suggests that high mobility group box 1 (HMGB1) plays a central role in its pathogenesis. Our in vitro and in vivo experiments revealed that HMGB1 was highly expressed in MM. Both genetic and pharmacological inhibition of HMGB1 markedly suppressed MM cell viability, migration, and invasion, while inducing G1-phase cell cycle arrest and enhancing apoptosis. Interestingly, the inhibition of Toll-like receptor 4 (TLR4), achieved through both siRNA and TAK-242 treatment, not only suppressed tumor-promoting signals but also reduced HMGB1 expression, suggesting a self-amplifying HMGB1-TLR4 loop. Mechanistically, in vitro experiments indicated that suppression of HMGB1 and TLR4 was associated with decreased activation of NF-κB, AKT, and ERK pathways, which are involved in regulating MM cell survival and motility. In xenograft models, treatment with ethyl pyruvate (EP) and TAK-242 significantly suppressed tumor growth and HMGB1 expression, reinforcing their therapeutic potential. Given HMGB1’s influence on both tumor cell behavior and the immune microenvironment, targeting the HMGB1-TLR4 axis may not only provide a novel therapeutic strategy for MM but also offer insights into the mechanisms underlying asbestos-induced tumorigenesis, potentially guiding future prevention and intervention strategies in asbestos-exposed populations. Full article

Dragon fruit comprises a wide variety of species that are rich in nutritional value and have great economic potential; however, numerous studies have focused on their nutritional and commercial quality. In contrast, few studies have addressed their flavor quality, particularly with respect to the regulatory networks responsible for their flavor-related substance contents. To this end, we sequenced the transcriptomes and metabolomes of red-skin/white-fleshed and red-skin/red-fleshed dragon fruit at different timepoints during fruit development. RNA-seq and metabolome data were used to divide the seven developmental stages of the dragon fruit into four categories (young fruit, expansion, maturity, and senescence). In all, 16,827 differentially expressed genes (DEGs), including 958 transcription factors, were identified and grouped into 10 clusters, and the pathways in each cluster were annotated. Additionally, 318 differentially accumulated metabolites (DAMs) were identified, including 88 common metabolites. The main flavor-related substances and the key genes regulating them were determined via joint analysis via RNA-seq and metabolomics. Furthermore, 10 volatile active components related to green flavors and aromas were screened according to the relative odor activity value (ROAV), and 15 candidate genes related to key flavor compounds were screened via WGCNA, 3 of which encoded transcription factors. In conclusion, our results provide a theoretical basis for an in-depth understanding of the volatile flavor compounds in dragon fruit and provide new genetic resources for the subsequent study of fruit flavor compounds. Full article

The classification of transmission tower bolt images faces challenges such as class imbalance, sample scarcity, and the low pixel proportion of pins. Traditional classification methods exhibit poor performance in identifying key categories with small proportions, fail to leverage the correlation between transmission line fittings and bolts, and suffer from severe false positive issues. This study proposes a novel approach that dynamically integrates two sampling strategies to address the class imbalance problem while incorporating contrastive learning and category labels to enhance the discrimination of easily confused samples. Additionally, an auxiliary branch discrimination mechanism effectively exploits the correlation between fittings and bolts and, combined with a threshold-based decision process, significantly reduces the false positive rate (by 3.74%). The experimental results demonstrate that, compared to the baseline SimCLR framework with ResNet18, the proposed method improves accuracy (Acc) by 10.22%, reduces the false alarm rate by 5%, and significantly enhances classification reliability in transmission line inspections, thereby mitigating unnecessary human resource consumption. Full article

This work explores the polymerization of sodium 4-styrenesulfonate (NaSS) inside filter paper using dielectric barrier discharge (DBD) plasma and its application in the environmental field. The plasma-based technique, performed under mild conditions, solves common problems associated with conventional polymerization inside porous materials. The polymerization process was monitored using Fourier-transform infrared (FTIR) spectroscopy, which confirmed the consumption of double bonds, particularly in NaSS samples containing the optimal concentration of crosslinker divinyl benzene (DVB) (0.25% wt). Our work demonstrates the effectiveness and promise of DBD plasma as a substitute polymerization approach, especially for those in porous materials. Full article

Molecularly imprinted polymers (MIPs) are synthetic polymers that mimic the functions of antibodies. Though MIPs are promising tools in various areas, achieving high selectivity in MIPs can be difficult. To improve selectivity, various approaches have been implemented; however, the role of polymerization methods or synthetic techniques in enhancing the selectivity of MIPs has not been studied and remains a crucial area for further research. MIPs are typically prepared from free radical reactions. Recently, we found that Dielectric Barrier Discharge (DBD) plasma can be used to initiate the polymerization of vinyl monomers. The DBD plasma method allows the monomers to associate with the template molecules and initiate polymerization with minimal disruption to the positioning of the monomers. We hypothesize that this could be a preferred method to prepare MIPs over the traditional radical reaction that may cause a disturbance of the pre-associated monomers on the templates for the polymerization. Chicken egg white serum albumin (CESA) was used as the template protein for the MIPs. Our results show that in all test conditions, approximately twofold improvement in selectivity was achieved, which is the primary performance metric for MIPs. This enhancement was evident across all categories, including MIPs prepared from various monomer combinations. Full article

Excessive nitrogen application may adversely impact grain yield and quality of rice. This study aimed to evaluate the impact of several nitrogen-reduction strategies on the grain yield and quality of mechanically transplanted hybrid indica rice. Field experiments were performed in 2020 and 2021 using Yixiangyou2115 and Fyou498. The research investigated variations in grain yield and quality of rice under different nitrogen-reduction strategies, including NR1, balanced N reduction; NR2, N reduction in basal fertilizer; NR3, N reduction in tillering fertilizer; and NR4, N reduction in earing fertilizer, compared to the conventional nitrogen application for high-yield cultivation (CK). Compared to CK, the grain yield of rice decreased by 1.63% to 19.71% under nitrogen-reduction strategies. Relative to NR3 and NR4, NR1 and NR2 exhibited an increase in grain yield ranging from 1.81% to 22.51%, attributed to increases in panicle number (0.61% to 13.19%) and spikelet number per panicle (1.60% to 12.28%). Meanwhile, NR1 and NR2 also had relatively high LAI and dry matter accumulation in rice plants at maturity. Compared to CK, NR1 and NR2 improved the processing quality of rice grain, while NR3 and NR4 resulted in reduced processing quality. The chalkiness rate and chalkiness degree of rice under the NR1, NR3, and NR4 treatments were reduced by 2.97% to 23.73% and 3.35% to 52.49%, respectively, in comparison to CK. Additionally, the NR1 and NR4 treatments were linked to an increase in taste value by 1.44% to 3.66% and gel consistency by 13.87% to 46.01% relative to CK. These findings suggest that balanced nitrogen reduction can maintain a high yield while improving the appearance and eating quality of mechanically transplanted hybrid indica rice. This study offers a theoretical basis for rational nitrogen reduction and high-quality cultivation in rice. Full article

Context: Chronic inflammation has been linked to cancer since the 19th century. Tumor growth is supported by the proangiogenic factors that chronic inflammation requires. Polarized leukocytes initiate these angiogenic and tumorigenic factors. TIPE2, a transport protein, manages the cytoskeletal rearrangement that gives a polarized leukocyte its motility. Inhibition of this protein could lead to a therapeutic option for solid tumor cancers; however, no such inhibitors have been developed so far due to the large cavity size of the TIPE2 protein. Here we have examined possible small molecule inhibitors by combining structure-based and fragment-based drug design approaches. The highest binding ligands were complexed with the protein, and fragment libraries were docked with the complex with the intention of linking the hit compounds and fragments to design a more potent ligand. Three hit compounds were identified by in silico structure-based screening and a linked compound, C2–F14, of excellent binding affinity, was identified by linking fragments to the hit compounds. C2–F14 demonstrates good binding stability in molecular dynamic simulations and great predicted ADME properties. Methods: High throughput molecular docking calculations of mass libraries were performed using AutoDock Vina 1.1.2. Molecular docking of individual ligands was performed using AutoDock Vina with PyRx. Ligand libraries were prepared using OpenBabel, linked ligands were prepared using Avogadro. The protein was prepared using AutoDockTools-1.5.6. Protein-ligand complexes were visualized with PyMOL. Two- and three-dimensional representations of protein–ligand interactions were plotted with BIOVIA Discovery Studio Visualizer. In silico absorption, distribution, metabolism, and excretion (ADME) properties were calculated using SwissADME. Molecular dynamics simulations were conducted with GROMACS. Full article

The design of earth-abundant and highly efficient bifunctional electrocatalysts for hydrogen evolution and oxygen evolution reactions (HER/OER) is crucial for hydrogen production through overall water splitting. Herein, we report a novel nanostructure consisting of vertically oriented CoP hierarchical nanosheet arrays with in situ-assembled carbon skeletons on a Ti foil electrode. The novel Zeolitic Imidazolate Framework-67 (ZIF-67) template-derived hierarchical nanosheet architecture effectively improved electrical conductivity, facilitated electrolyte transport, and increased the exposure of the active sites. The obtained bifunctional hybrid exhibited a low overpotential of 72 mV at 10 mA cm⁻² and a small Tafel slope of 65 mV dec⁻¹ for HER, and an improved overpotential of 329 mV and a Tafel slope of 107 mV dec⁻¹ for OER. Furthermore, the assembled C@CoP||C@CoP electrolyzer showed excellent overall water splitting performance (1.63 V) at a current density of 10 mA cm⁻² and superior durability. This work provides a structure engineering strategy for metal–organic framework (MOF) template-derived hybrids with outstanding electrocatalytic performance. Full article

This research investigated a non-thermal, dielectric-barrier discharge (DBD) plasma-based approach to prepare poly(acrylic acid) (PAA) from acrylic acid in its liquid state at atmospheric temperature and pressure. Neither additives nor solvents were needed, and the polymerization was accomplished both as a film and inside a sheet of mesoporous paper. All prepared samples were characterized and the DBD plasma-initiated kinetics were analyzed for the polymerization of acrylic acid. Using FTIR semi-quantitative analysis, the degree of polymerization was monitored, and the reaction followed an overall second-order kinetic model with respect to the DBD-initiated polymerization. Additionally, the application of a PAA-modified paper as a water retention cloth or ‘wet wipe’ was investigated. The results showed that the PAA-modified paper substrates using DBD plasma increased water retention as a function of plasma treatment time. Full article

Hybrid manufacturing of titanium alloys by investment casting and laser additive manufacturing (LAM) combines the advantages of both techniques and can further reduce the cost. In this study, microstructure evolution in the bonding zone and tensile property of the hybrid manufacturing Ti-6Al-4V alloy are carefully investigated. Results show that the hybrid sample consists of the LAM zone, the heat-affected zone (HAZ) and the base casting zone. A transition zone (TZ) forms within the HAZ close to the fusion line. Grains in the bottom of the LAM zone are much finer with a mixture of equiaxed grain and small columnar grain, and gradually coarsening to fully large columnar grains. Typical ultra-fine basket-wave microstructure forms in the LAM zone. In the TZ, the microstructure gradually changes from a fine basket-wave microstructure to a coarsened bimodal microstructure. The highest microhardness of the bonding zone is 491 HV. The fracture of the hybrid sample occurs in the casting half, and the tensile strength of the hybrid sample reaches (821 ± 31) MPa, which is higher than that of the pure casting sample ((778 ± 22) MPa). However, the elongation of the hybrid sample ((8.0 ± 0.5)%) is lower than that of the pure casting sample ((10.0 ± 1.7)%). Full article

In an attempt to widen the family of Phosphorus Metal Halides (M_xP_yX_z) and enable new applications, post-synthetic modifications to the M_xP_yX_z, Cu₂P₃I₂ have been reported. While such a technique suggests access to an entirely new family of M_xP_yX_z-based materials, we report, in this work, that the ion-exchange process seemingly influences important properties such as the crystallographic pattern and vibrational modes. Full article

Perfluorooctanoic acid (PFOA) is an artificially synthesized perfluorinated chemical widely used in industries. It is often released into the environment without treatment, which causes pollution in groundwater. Recently, we have reported a rapid and efficient removal of PFOA in aqueous solution by using a fountain-strip dielectric barrier discharge reactor (SF-DBD). This design allows for the gaseous–liquid interaction to happen in a large space at atmospheric pressure, so it is a promising method to efficiently remove PFOA from water. Recently, we reported the effects of the process parameters, including power mode, pulse time, sinusoidal wave discharge, the discharge gas, initial concentration, pH, conductivity, and positive and negative discharges, on the efficiency of this method for PFOA degradation. Understanding the reaction mechanism is key to further improve the efficiency of the system. In this work, we reported the decomposition mechanism of the SF-DBD for PFOA degradation. The mass spectrum (MS) showed that PFOA was degraded to perfluoroheptanoic acid, perfluorohexanoic acid, perfluoropentanoic acid, perfluorobutanoic acid, perfluoropropionic acid, and trifluoroacetic acid after the plasma treatment. The optical emission spectroscope (OES) and the radical scavenger experiments indicated that the excited argon atoms and hydroxyl radicals played a major role in PFOA degradation, while the contributions from the solvated electrons (e⁻_aq), superoxide anion radical (·O²⁻), and singlet oxygen (1O₂) were negligible in initiating the cleavage reaction. Full article

The optimum femtosecond laser direct writing of Bragg gratings on silica optical waveguides has been investigated. The silica waveguide has a 6.5 × 6.5 µm² cross-sectional profile with a 20-µm-thick silicon dioxide cladding layer. Compared with conventional grating inscribed on fiber platforms, the silica planar waveguide circuit can realize a stable performance as well as a high-efficiency coupling with the fiber. A thin waveguide cladding layer also facilitates laser focusing with an improved spherical aberration. Different from the circular fiber core matching with the Gaussian beam profile, a 1030-nm, 400-fs, and 190-nJ laser is optimized to focus on the top surface of the square silica waveguide, and the 3rd-order Bragg gratings are inscribed successfully. A 1.5-mm long uniform Bragg gratings structure with a reflectivity of 90% at a 1548.36-nm wavelength can be obtained. Cascaded Bragg gratings with different periods are also inscribed in the planar waveguide. Different reflection wavelengths can be realized, which shows great potential for wavelength multiplexing-related applications such as optical communications or sensing. Full article

The effects of temperature and surfactant on the shape of candle droplets that solidify at air-water interfaces were investigated. In pure water, triangular or quadrangular shaped candle droplets were formed when the temperature was ≤6 °C and round shape droplets were observed when the temperature was ≥10 °C. In SDS/water solutions ≥ 0.5 mM, oval or concave bowl-shaped candle droplets were formed when the temperature was ≤6 °C and round shape droplets were observed when the temperature was ≥10 °C. The formation mechanisms of the different shapes were explored and discussed. Full article

Perfluorooctanoic acid (PFOA) is an artificially synthesized per-fluorinated chemical widely used in industry. It is often released into the environment without treatment and causes pollution in groundwater. In this paper, we employed a strip fountain dielectric barrier discharge (SF-DBD) plasma source to degrade PFOA from the water. The effects of power supply mode, discharge gases, pH, the conductivity of the solution, concentration, etc., on the degradation efficiency were studied. For a 200 mL sample of 75 mg/L PFOA, a 99% degradation efficiency with a 204.5 μg/kJ energy production rate was achieved using an average power of 43 W negative pulse argon plasma for 50 min at atmospheric pressure. The total organic carbon concentration (TOC) decreased by 63% after a 60 min treatment. The SF-DBD proves to be a promising and energy-saving technique to efficiently remove PFOA from water. Full article