Search Results (26)

The definition, characterization and implementation of Positive Energy Districts is crucial in the path towards urban decarbonization and energy transition. However, several issues still must be addressed: the need for a clear and comprehensive definition, and the settlement of a consistent design approach for Positive Energy Districts. As emerged throughout the workshop held during the fourth edition of Smart and Sustainable Planning for Cities and Regions Conference (SSPCR 2022) in Bolzano (Italy), further critical points are also linked to the planning, modeling and assessment steps, besides sustainability aspects and stakeholders’ involvement. The “World Café” methodology adopted during the workshop allowed for simple—but also effective and flexible—group discussions focused on the detection of key PED characteristics, such as morphologic, socio-economic, demographic, technological, quality-of-life and feasibility factors. Four main work groups were defined in order to allow them to share, compare and discuss around five main PED-related topics: energy efficiency, energy flexibility, e-mobility, soft mobility, and low-carbon generation. Indeed, to properly deal with PED challenges and crucial aspects, it is necessary to combine and balance these technologies with enabler factors like financing instruments, social innovation and involvement, innovative governance and far-sighted policies. This paper proposes, in a structured form, the main outcomes of the co-creation approach developed during the workshop. The importance of implementing a holistic approach was highlighted: it requires a systematic and consistent integration of economic, environmental and social aspects directly connected to an interdisciplinary cross-sectorial collaboration between researchers, policymakers, industries, municipalities, and citizens. Furthermore, it was reaffirmed that, to make informed and reasoned decisions throughout an effective PED design and planning process, social, ecological, and cultural factors (besides merely technical aspects) play a crucial role. Thanks to the valuable insights and recommendations gathered from the workshop participants, a conscious awareness of key issues in PED design and implementation emerged, and the fundamental role of stakeholders in the PED development path was confirmed. Full article

The aim of the current study was to retrospectively investigate the prevalence of peri-implant mucositis (PIM) and peri-implantitis (P) in a long-term follow-up (≥20 years) of implants with the same body design and body surface but different collar surfaces with laser-microtextured grooves (LMGSs) vs. no laser-microtextured grooves (no-LMGSs) in private practice patients. Furthermore, several patient-related, implant-related, site-, surgical-, and prosthesis-related potential disease risk factors were analyzed. A chart review of patients receiving at least one pair of implants (one with an LMGS and the other without LMGS) in the period 1993–2002 was used. Chi-square analysis was used to determine if a statistically significant difference between the investigated variables and PIM/P was present. Possible risk factors were statistically evaluated by a binary logistic regression analysis. A total of 362 patients with 901 implant-supported restorations (438 with LMGS and 463 no-LMGS) were included in the study. The cumulative survival rates of implants at 5, 10, 15, and 20 years were 98.1%, 97.4%, 95.4%, and 89.8%, respectively, for the LMGS group, and 93.2%, 91.6%, 89.5%, and 78.3% for the no-LMGS group. The difference was statistically significant at all timepoints (p < 0.05). In total, at the end of the follow-up period, 45.7% of patients and 39.8% of implants presented PIM, and 15.6% of patients and 14% of implants presented P. A total of 164 LMGS implants (37.4%) and 195 no-LMGS implants (42.1%) presented peri-implant mucositis, while 28 (6.3%) of LMGS implants and 98 (21.1%) no-LMGS implants demonstrated peri-implantitis. Differences between LMGS implants and no-LMGS implants were statistically significant (p < 0.05). The binary logistic regression identified collar surface, cigarette smoking, histories of treated periodontitis, and lack of peri-implant maintenance as risk factors for P. After at least 20 years of function in patients followed privately, LMGS implants compared to no-LMGS implants presented a statistically and significantly lower incidence of P. Implant collar surface, cigarette smoking, previously treated periodontitis, and lack of peri-implant maintenance are factors with significant association to P. Full article

(1) The possibility of knowing information about the anatomy in advance, in particular the arrangement of the endodontic system, is crucial for successful treatment and for avoiding complications during endodontic therapy; the aim was to find a correlation between a minimally invasive and less stressful endodontic access on Ni-Ti rotary instruments, but which allows correct vision and identification of anatomical reference points, simplifying the typologies based on the shape of the pulp chamber in coronal three-dimensional exam views. (2) Based on the inclusion criteria, 104 maxillary molars (52 maxillary first molars and 52 maxillary second molars) were included in the study after 26 Cone Beam Computed Tomography (CBCT) acquisitions (from 15 males and 11 females). And linear measurements were taken with the CBCT-dedicated software for subsequent analysis. (3) The results of the present study show data similar to those already published about this topic. Pawar and Singh’s simplified classification actually seems to offer a schematic way of classification that includes almost all of the cases that have been analyzed. (4) The use of a diagnostic examination with a wide Field of View (FOV) and low radiation dose represents an exam capable of obtaining a lot of clinical information for endodontic treatment. Nevertheless, the endodontic anatomy of the upper second molar represents a major challenge for the clinician due to its complexity both in canal shape and in ramification. Full article

This study aims to evaluate the effectiveness of the dietary addition of Spirulina platensis (SP) and/or garlic powder (GP) on heat-stressed broiler chickens. For this purpose, 600 Ross-308 broiler chicks were allocated at 22 days of age into five groups (G1–G5), each comprising six groups of 20 birds each. Chickens kept in G1 (negative control) were fed a basal diet and raised at 26 ± 1 °C. Chickens kept in G2 to G5 were exposed to periodic heat stress (35 ± 1 °C for 9 h/day) from 22 to 35 days old. Chickens in G2 (positive control) were provided a basal diet, while G3, G4, and G5 were fed a basal diet enriched with SP (1 g/kg diet), GP (200 mg/kg diet), or SP/GP (1 g SP/kg + 200 mg GP/kg diet), respectively. The assessment parameters included the chickens’ performance, malondialdehyde and total antioxidant capacity, blood biochemistry, intestinal morphology, and modulation of lactobacilli and total coliforms in the intestinal microbiota. Our findings demonstrated that supplementing heat-stressed chickens with SP and/or GP significantly mitigated the negative effects on the European production efficiency index (EPEF), survival rate, cholesterol profile, and oxidative stress markers. Chickens supplemented with GP and/or SP exhibited significantly better EPEF and survivability rates. Heat stress had a significant impact on both the gut structure and gut microbiota. However, SP and/or GP supplementation improved the gut morphology, significantly increased the intestinal lactobacilli, and reduced the coliform contents. It was also found that the simultaneous feeding of SP and GP led to even higher recovery levels with improved lipid metabolites, immunity, and oxidative status. Overall, supplementing chickens with SP and/or GP can alleviate the negative effects of heat stress. Full article

The aim of this study is to assess and analyze the intratubular penetration of the intracanal medications nitrofurantoin (Nit), triple antibiotic paste (TAP), and calcium hydroxide (CH). Sixty freshly extracted single-rooted teeth were acquired and decoronated to a standard length of 15 mm. To prepare specimens up to size F3, rotary ProTaper instrumentation was employed. The prepared teeth were divided into three groups, each of which received one of the tested intracanal medicaments: Group I (calcium hydroxide), Group II (triple antibiotic paste), and Group III (nitrofurantoin). Using a size #30 Lentulo spiral, a freshly prepared therapeutic paste was placed into the canals, and the intracanal medicaments were allowed to set in the incubator at 100% humidity. The samples were subsequently sliced perpendicularly to their long axis using a precision saw and assessed under a scanning electron microscope to assess the depth of penetration of intracanal medicaments at the coronal, middle, and apical portions of the root canal dentin. The data were analyzed using one-way ANOVA and Tukey’s post hoc test. The statistical analysis revealed a significant difference between the experimental groups in the quantity and depth of sealer penetration (p < 0.05). In particular, as compared to the Nit group, both the CH and TAP groups had significantly smaller penetration areas (p < 0.05). In conclusion, this ongoing investigation indicates that nitrofurantoin penetrated dentinal tubules better than calcium hydroxide or triple antibiotic paste. Full article

This study aimed to assess the relationship of the morphology and size of the sella turcica (ST) with dental anomalies and skeletal malocclusions. This cross-sectional study was conducted on records of fixed orthodontic patients treated between 2013 and 2022. Cephalometric analysis was performed to determine the anteroposterior and vertical skeletal patterns. Preoperative panoramic radiographs and lateral cephalograms, intraoral photographs, and primary dental casts of patients were used to detect dental anomalies. Gender, sagittal and vertical skeletal patterns, dental anomalies, and dimensions (length, depth, and diameter), and morphology of the ST were all recorded according to the lateral cephalograms of patients. Data were analyzed using independent t-test, one-way and two-way ANOVA, Chi-square test, and log rank test (alpha = 0.05). The depth and diameter of the ST had no significant correlation with gender (p > 0.05); however, the length of the ST was significantly longer in males than females (p < 0.05). The morphology of the ST had a significant correlation with gender (p < 0.05). The ST morphology had a significant correlation with the anteroposterior skeletal pattern, microdontia, and tooth impaction as well (p < 0.05). The present results revealed a significant correlation of the ST morphology with the anteroposterior skeletal pattern, microdontia, and tooth impaction. Full article

An efficient quantum cutting mechanism was observed in a system comprising ${\mathrm{T}\mathrm{b}}^{3+}-{\mathrm{Y}\mathrm{b}}^{3+}$ codoped silica hafnia glass and glass-ceramic. Thin films were deposited on silicon substrates using the dip-coating method and photoluminescence dynamics revealed a quantum efficiency of up to 179% at 980 nm. These films can efficiently convert light to lower energy levels and can easily be integrated into silicon-based solar cells, increasing their photoelectric conversion efficiency at a low cost. This was demonstrated through electrical characterization, which revealed a boost in solar cell efficiency when the film was utilized. It was specifically noted that the efficiency of Si solar cells increased by 10.79% and 10.78% when covered with 70SiO₂$-$30HfO₂$-3{\mathrm{T}\mathrm{b}}^{3+}-12{\mathrm{Y}\mathrm{b}}^{3+}$ glass and glass ceramic, respectively. Furthermore, an evaluation of the additional external quantum efficiency, derived from this optical system, revealed an improvement ranging from 2.64% to 3.44%. This finding highlights the enhanced light conversion capabilities of the quantum cutting mechanism within the system. Full article

The measurement of the refractive index typically requires the use of optical ellipsometry which, although potentially very accurate, is extremely sensitive to the structural properties of the sample and its theoretical modeling, and typically requires specialized expertise to obtain reliable output data. Here, we propose a simple diffractive method for the measurement of the refractive index of homogenous solid thin films, which requires only the structuring of the surface of the material to be measured with the profile of a diffraction grating. The refractive index of an exemplary soft-moldable material is successfully estimated over a wide wavelength range by simply incorporating the measured topography and diffraction efficiency of the grating into a convenient scalar theory-based diffraction model. Without the need for specialized expertise and equipment, the method can serve as a simple and widely accessible optical characterization of materials useful in material science and photonics applications. Full article

The adaptation of a sealer along with the periphery of the dentinal tubules of the root canal is studied. Various techniques have been used for the application of these sealers onto the canal wall for better adaptation but have not been compared to date. The purpose of the study was to comparatively evaluate the sealing ability of a bioceramic sealer with AH plus sealer with root canal dentin using three different techniques for the application of sealer. One hundred twenty extracted maxillary and mandibular anterior teeth were collected, disinfected, and decoronated at the cemento-enamel junction to maintain a standard working length for all samples. The establishment of the working length (40.10) and instrumentation was performed using a rotary instrument, along with a standard irrigation regimen. The teeth were then divided into two main groups according to the sealer used, i.e., Group A (AH Plus) and Group B (iRoot SP). These two main groups were categorized into three sub-groups depending on the technique of sealer placement, i.e., Subgroup 1 (master cone gutta-percha), Subgroup 2 (bidirectional spiral), and Subgroup 3 (passive ultrasonic activation). Out of the 20 samples, 15 samples were randomly allocated for the assessment of sealing ability using the routine dye extraction method, and to verify the results of the dye extraction method, a more advanced evaluation method, i.e., SEM evaluation, was utilized further. To this end, five random samples from each subgroup were allocated for SEM analysis. The obtained scores were then statistically analyzed using an ANOVA test and Post Hoc Tukey’s test. In the current study, statistical significance was seen among the three main groups and six subgroups with p-values < 0.005. Subgroup B3 performed significantly better than the other subgroups in both the dye extraction method as well as in SEM analysis. The highest microleakage was shown by subgroup A1; it also exhibited poor penetration of sealer in SEM evaluation. The bioceramic sealer (iRoot SP), when applied using passive ultrasonic activation, showed the best results in both the dye extraction method and the SEM evaluation. Full article

Since a solution towards carbon neutrality in already highly populated territories that does not profoundly alter the territories has not yet been found, territorial acupuncture, a new methodology presented in this paper, proposes a solution to this challenge and simultaneously helps to counter the dysfunctional dichotomy between large urban centres and small towns. The aim of this study is therefore to present this new concept and its operation. Hence, a phased study was carried out. Territorial acupuncture is the result of merging different theories and practices, such as Biourbanism, urban acupuncture, and energy community design. For Territorial Acupuncture, the territory is conceived as a single organism and, just like acupuncture in traditional Chinese medicine, punctual interventions (in this case, interconnected energy communities) would benefit the entire territory organism. To make the theory work properly, it will be necessary to carry out multi-scalar and multi-disciplinary analyses over the entire territory to identify the intervention points and then proceed to the design and interconnection of the individual district. Thus, Territorial Acupuncture provides a new approach to the resilience of densely populated territories, which, through punctual interventions on a district scale, benefits the entire territory by modifying energy, socio-economic, and environmental dynamics. Full article

The pushout bond strength of root fillings at radicular dentin was investigated employing NaOCl, CHX, and homoeopathic mother tincture (Arnica montana) as an irrigant. Sixty human permanent single-rooted extracted teeth were decoronated. The root canals were instrumented using Pro taper universal rotary system (Dentsply Tulsa Dental; Tulsa, Oklahoma) and were prepared up to F3 apical size. The roots were then randomly divided into three groups according to irrigation solution (n = 20) according to the final irrigation regimen: Group I: 3 mL 5.25% NaOCl followed by 3 mL Saline (control); Group II: 3 mL Arnica montana (10%, w/v) followed by 3 mL Saline; Group III: 3 mL CHX followed by 3 mL Saline. The canals were dried using paper points. The canals were coated with AH Plus sealer (Dentsply DeTey, Konstaz, Germany) with the aid of a Lentulo spiral (Dentsply DeTey, Konstaz, Germany) and obturated with #F3 gutta-percha. Each root was then horizontally sliced into three slices, labelled coronal, middle, and apical, each measuring 2 mm thick. Furthermore, at a crosshead speed of 2 mm/min, the test was carried out using the universal testing apparatus. The 5.25% NaOCl significantly decreased the bond strength of AH Plus to dentin. Both CHX and Arnica montana were capable of reversing the compromised pushout of AH Plus to NaOCl-treated dentin. After using NaOCl as an irrigant, the danger of diminished binding capacity of AH Plus to root canal walls arises. Final irrigation with Arnica montana and CHX reduces this risk. Full article

A Positive Energy District (PED) is a portion of urban area with defined boundaries that can produce energy in excess of its own consumption. The aim of this study is to analyse design variations among the six projects (12 case studies) of PED belonging to the European Smart Cities and Communities programme. Thus, it will be possible to identify the reasons behind the energy choices related to generation, storage and distribution that appear in the different geographical areas. To achieve this, different data were collected by consulting official documents and creating questionnaires that were communicated with the project representatives. Thus, the result of this study is a catalogue of the energy system solutions adopted in the studied PEDs with a critical analysis of the different motivations behind them in order to outline general trends in the geographical areas with similar characteristics. In conclusion, this study defined which technological choices are the most common in territories with similar profiles and how divergent those with different profiles are. Furthermore, applied to a large catalogue of PED, the methodology identified would make it possible to create different operating models for different territorial types and urban settlements. Full article

This study assessed the relationship between posterior permanent dentition and radiographic changes of the mandibular condyle. This descriptive, cross-sectional study was conducted on 300 panoramic radiographs of patients over 40 years of age (188 females and 112 males). Panoramic radiographs were evaluated for condylar changes such as flattening, subcortical sclerosis, subcortical cyst, erosion, osteophytes, and generalized sclerosis. Presence of muscle pain and temporomandibular joint (TMJ) pain and sounds, and history of TMJ trauma were also assessed. The occlusal scheme of posterior teeth was analyzed according to the Eichner’s index. The frequency of condylar changes was calculated in the right and left sides, and their association with posterior permanent dentition was analyzed by the Chi-square test (alpha = 0.05). The frequency of flattening, muscle pain, TMJ sounds, and erosion was 11.7%, 9.7%, 5.7%, and 3.7% in the right side, respectively. The frequency of flattening, muscle pain, erosion, and subcortical cyst was 12%, 9.3%, 5%, and 5% in the left side, respectively. The frequency of bilateral muscle pain, flattening, TMJ sounds, and TMJ pain was 18%, 16.7%, 11.7%, and 9.3%, respectively. Cases with TMJ trauma, generalized sclerosis, and osteophytes were few. According to the Eichner’s index, most patients with condylar changes had classes A and B, and a smaller percentage had class C. No significant difference was noted between healthy individuals and those with condylar changes regarding dentition patterns. No relationship existed between condylar changes and posterior permanent dentition pattern. Full article

This work focused on the leaves of Dittrichia viscosa, a plant used in Mediterranean folk medicine. Compared to water extract, the methanolic extract had higher antioxidant effects. Moreover, this extract showed potent in vitro inhibitory activity against α-amylase and α-glucosidase and showed an interesting antiglycation effect. Additionally, the evaluation of the cytotoxic activity of the methanolic extract against two human breast cancer cell lines, MCF-7 and MDA-MB-468, was very promising, with no cytotoxicity towards normal cells (peripheral blood mononuclear cells (PBMCs). The antibacterial effect was also assessed and showed potent inhibitory activity against Proteus mirabilis and Bacillus subtilis. On the other hand, Dittrichia viscosa leaves were rich in macro-elements containing appropriate micro-elements and high levels of phenolics and flavonoids such as caffeic acid derivatives. Taken together, the results obtained in this study indicate that Dittrichia viscosa could constitute a valuable source of bioactive molecules and could be used either on the preventive side or for therapeutic applications without toxicity. Full article