Search Results (13)

Innovative tools suitable for chemical risk assessment are being developed in numerous domains, such as non-target chemical analysis, omics, and computational approaches. These methods will also be critical components in an efficient early warning system (EWS) for the identification of potentially hazardous chemicals. Much knowledge is missing for current use chemicals and thus computational methodologies complemented with fast screening techniques will be critical. This paper reviews current computational tools, emphasizing those that are accessible and suitable for the screening of new and emerging risk chemicals (NERCs). The initial step in a computational EWS is an automatic and systematic search for NERCs in literature and database sources including grey literature, patents, experimental data, and various inventories. This step aims at reaching curated molecular structure data along with existing exposure and hazard data. Next, a parallel assessment of exposure and effects will be performed, which will input information into the weighting of an overall hazard score and, finally, the identification of a potential NERC. Several challenges are identified and discussed, such as the integration and scoring of several types of hazard data, ranging from chemical fate and distribution to subtle impacts in specific species and tissues. To conclude, there are many computational systems, and these can be used as a basis for an integrated computational EWS workflow that identifies NERCs automatically. Full article

Organometallic complexes of fac-tricarbonylrhenium have been shown to exhibit anticancer properties. Anthrapyrazole anticancer agents act as DNA intercalators and topoisomerase IIα inhibitors, leading to double-strand breaks (DBS) and cell cycle arrest. This work involves the synthesis and biological evaluation of novel fac-tricarbonyl-rhenium complexes with anthrapyrazole derivatives. The anthrapyrazole moiety was synthesized from 1,8-dihydroxyanthraquinone, and three ligands L1, L2 and L3 were prepared. Ligand L1 coordinates via the phenolic O and pyrazole N as bidentate chelator forming the fac-[Re(CO)₃(κ²-N,O)(MeOH)]-type complex, ReL1. Ligand L2 contains a pendant picolylamine N,N′-chelating system, forming the bidentate fac-[Re(CO)₃(κ²-N,N′)Br]-type complex, ReL2. Ligand L3 contains a pendant picolylaminomonoacetic acid chelating system, forming a tridentate fac-[Re(CO)₃(κ³-N,N′,O)]-type complex, ReL3. Complex ReL4 contains a picolylamine chelator, forming a complex with structure fac-[Re(CO)₃(κ²-N,N′)Br], which was synthesized as a model for ReL2, and its coordination mode was resolved by X-ray crystallography. The complexes were characterized spectroscopically, and their biological properties were evaluated in vitro, in terms of DNA binding as well as for the cytotoxicity against CT-26 tumor cell line. Tumor cell cytotoxicity was high for ligand L2 and complex ReL2, exhibiting IC₅₀ values of 0.36 and 0.64 μΜ, respectively. The most promising complex ReL2 was evaluated further by the preparation of its congener γ-emitting technetium-99m radio-complex, ^99mTcL2. The in vitro uptake in CT26 tumor cells and the in vivo uptake in CT26 tumor-bearing mice of ^99mTcL2 was determined, and its pharmacokinetic profile was established. These data indicate that the ^99mTc complex has suitable properties to enter tumor cells in vitro and in vivo, and therefore ReL2 is promising for further evaluation. Full article

Participatory exposure research, which tracks behaviour and assesses exposure to stressors like air pollution, traditionally relies on time-activity diaries. This study introduces a novel approach, employing machine learning (ML) to empower laypersons in human activity recognition (HAR), aiming to reduce dependence on manual recording by leveraging data from wearable sensors. Recognising complex activities such as smoking and cooking presents unique challenges due to specific environmental conditions. In this research, we combined wearable environment/ambient and wrist-worn activity/biometric sensors for complex activity recognition in an urban stressor exposure study, measuring parameters like particulate matter concentrations, temperature, and humidity. Two groups, Group H (88 individuals) and Group M (18 individuals), wore the devices and manually logged their activities hourly and minutely, respectively. Prioritising accessibility and inclusivity, we selected three classification algorithms: k-nearest neighbours (IBk), decision trees (J48), and random forests (RF), based on: (1) proven efficacy in existing literature, (2) understandability and transparency for laypersons, (3) availability on user-friendly platforms like WEKA, and (4) efficiency on basic devices such as office laptops or smartphones. Accuracy improved with finer temporal resolution and detailed activity categories. However, when compared to other published human activity recognition research, our accuracy rates, particularly for less complex activities, were not as competitive. Misclassifications were higher for vague activities (resting, playing), while well-defined activities (smoking, cooking, running) had few errors. Including environmental sensor data increased accuracy for all activities, especially playing, smoking, and running. Future work should consider exploring other explainable algorithms available on diverse tools and platforms. Our findings underscore ML’s potential in exposure studies, emphasising its adaptability and significance for laypersons while also highlighting areas for improvement. Full article

Air pollution exposure is harmful to human health and reducing it at the level of an individual requires measurements and assessments that capture the spatiotemporal variability of different microenvironments and the influence of specific activities. In this paper, activity-specific and general indoor and outdoor exposure during and after a period of high concentrations of particulate matter (PM), e.g., an atmospheric thermal inversion (ATI) in the Ljubljana subalpine basin, Slovenia, was assessed. To this end, personal particulate matter monitors (PPM) were used, worn by participants of the H2020 ICARUS sampling campaigns in spring 2019 who also recorded their hourly activities. ATI period(s) were determined based on data collected from two meteorological stations managed by the Slovenian Environmental Agency (SEA). Results showed that indoor and outdoor exposure to PM was significantly higher during the ATI period, and that the difference between mean indoor and outdoor exposure to PM was much higher during the ATI period (23.0 µg/m³) than after (6.5 µg/m³). Indoor activities generally were associated with smaller differences, with cooking and cleaning even having higher values in the post-ATI period. On the other hand, all outdoor activities had higher PM values during the ATI than after, with larger differences, mostly >30.0 µg/m³. Overall, this work demonstrated that an individual-level approach can provide better spatiotemporal resolution and evaluate the relative importance of specific high-exposure events, and in this way provide an ancillary tool for exposure assessments. Full article

Human biomonitoring has become a pivotal tool for supporting chemicals’ policies. It provides information on real-life human exposures and is increasingly used to prioritize chemicals of health concern and to evaluate the success of chemical policies. Europe has launched the ambitious REACH program in 2007 to improve the protection of human health and the environment. In October 2020 the EU commission published its new chemicals strategy for sustainability towards a toxic-free environment. The European Parliament called upon the commission to collect human biomonitoring data to support chemical’s risk assessment and risk management. This manuscript describes the organization of the first HBM4EU-aligned studies that obtain comparable human biomonitoring (HBM) data of European citizens to monitor their internal exposure to environmental chemicals. The HBM4EU-aligned studies build on existing HBM capacity in Europe by aligning national or regional HBM studies. The HBM4EU-aligned studies focus on three age groups: children, teenagers, and adults. The participants are recruited between 2014 and 2021 in 11 to 12 primary sampling units that are geographically distributed across Europe. Urine samples are collected in all age groups, and blood samples are collected in children and teenagers. Auxiliary information on socio-demographics, lifestyle, health status, environment, and diet is collected using questionnaires. In total, biological samples from 3137 children aged 6–12 years are collected for the analysis of biomarkers for phthalates, HEXAMOLL^® DINCH, and flame retardants. Samples from 2950 teenagers aged 12–18 years are collected for the analysis of biomarkers for phthalates, Hexamoll^® DINCH, and per- and polyfluoroalkyl substances (PFASs), and samples from 3522 adults aged 20–39 years are collected for the analysis of cadmium, bisphenols, and metabolites of polyaromatic hydrocarbons (PAHs). The children’s group consists of 50.4% boys and 49.5% girls, of which 44.1% live in cities, 29.0% live in towns/suburbs, and 26.8% live in rural areas. The teenagers’ group includes 50.6% girls and 49.4% boys, with 37.7% of residents in cities, 31.2% in towns/suburbs, and 30.2% in rural areas. The adult group consists of 52.6% women and 47.4% men, 71.9% live in cities, 14.2% in towns/suburbs, and only 13.4% live in rural areas. The study population approaches the characteristics of the general European population based on age-matched EUROSTAT EU-28, 2017 data; however, individuals who obtained no to lower educational level (ISCED 0–2) are underrepresented. The data on internal human exposure to priority chemicals from this unique cohort will provide a baseline for Europe’s strategy towards a non-toxic environment and challenges and recommendations to improve the sampling frame for future EU-wide HBM surveys are discussed. Full article

The aim of this work was to demonstrate how human biomonitoring (HBM) data can be used to assess cancer risks for workers and the general population. Ortho-toluidine, OT (CAS 95-53-4) is an aniline derivative which is an animal and human carcinogen and may cause methemoglobinemia. OT is used as a curing agent in epoxy resins and as intermediate in producing herbicides, dyes, and rubber chemicals. A risk assessment was performed for OT by using existing HBM studies. The urinary mass-balance methodology and generic exposure reconstruction PBPK modelling were both used for the estimation of the external intake levels corresponding to observed urinary levels. The external exposures were subsequently compared to cancer risk levels obtained from the evaluation by the Scientific Committee on Occupational Exposure Limits (SCOEL). It was estimated that workers exposed to OT have a cancer risk of 60 to 90:10⁶ in the worst-case scenario (0.9 mg/L in urine). The exposure levels and cancer risk of OT in the general population were orders of magnitude lower when compared to workers. The difference between the output of urinary mass-balance method and the general PBPK model was approximately 30%. The external exposure levels calculated based on HBM data were below the binding occupational exposure level (0.5 mg/m³) set under the EU Carcinogens and Mutagens Directive. Full article

A novel roofing tile was developed containing various types of nanoparticles of titanium dioxide (TiO₂). Experiments were conducted using three types of TiO₂ nanoparticles with and without polyethylene glycol (PEG). All types of newly developed nanomaterials were characterized using X-ray diffractometry. Particle size distribution analysis was performed and specific surface area was determined using the Brunauer–Emmet–Teller method. SEM imaging was used for the morphological characterization of nanoparticles. Commercial ceramic roofing tiles underwent a dip-coating procedure to obtain the desired photocatalytic surface. The TiO₂ anatase samples exhibited greater surface areas of nanoparticles, thus providing potentially the highest photocatalytic efficiency. Full article

Using low-cost portable air quality (AQ) monitoring devices is a growing trend in personal exposure studies, enabling a higher spatio-temporal resolution and identifying acute exposure to high concentrations. Comprehension of the results by participants is not guaranteed in exposure studies. However, information on personal exposure is multiplex, which calls for participant involvement in information design to maximise communication output and comprehension. This study describes and proposes a model of a user-centred design (UCD) approach for preparing a final report for participants involved in a multi-sensor personal exposure monitoring study performed in seven cities within the EU Horizon 2020 ICARUS project. Using a combination of human-centred design (HCD), human–information interaction (HII) and design thinking approaches, we iteratively included participants in the framing and design of the final report. User needs were mapped using a survey (n = 82), and feedback on the draft report was obtained from a focus group (n = 5). User requirements were assessed and validated using a post-campaign survey (n = 31). The UCD research was conducted amongst participants in Ljubljana, Slovenia, and the results report was distributed among the participating cities across Europe. The feedback made it clear that the final report was well-received and helped participants better understand the influence of individual behaviours on personal exposure to air pollution. Full article

Use of a multi-sensor approach can provide citizens with holistic insights into the air quality of their immediate surroundings and their personal exposure to urban stressors. Our work, as part of the ICARUS H2020 project, which included over 600 participants from seven European cities, discusses the data fusion and harmonization of a diverse set of multi-sensor data streams to provide a comprehensive and understandable report for participants. Harmonizing the data streams identified issues with the sensor devices and protocols, such as non-uniform timestamps, data gaps, difficult data retrieval from commercial devices, and coarse activity data logging. Our process of data fusion and harmonization allowed us to automate visualizations and reports, and consequently provide each participant with a detailed individualized report. Results showed that a key solution was to streamline the code and speed up the process, which necessitated certain compromises in visualizing the data. A thought-out process of data fusion and harmonization of a diverse set of multi-sensor data streams considerably improved the quality and quantity of distilled data that a research participant received. Though automation considerably accelerated the production of the reports, manual and structured double checks are strongly recommended. Full article

Low-cost sensors can be used to improve the temporal and spatial resolution of an individual’s particulate matter (PM) intake dose assessment. In this work, personal activity monitors were used to measure heart rate (proxy for minute ventilation), and low-cost PM sensors were used to measure concentrations of PM. Intake dose was assessed as a product of PM concentration and minute ventilation, using four models with increasing complexity. The two models that use heart rate as a variable had the most consistent results and showed a good response to variations in PM concentrations and heart rate. On the other hand, the two models using generalized population data of minute ventilation expectably yielded more coarse information on the intake dose. Aggregated weekly intake doses did not vary significantly between the models (6–22%). Propagation of uncertainty was assessed for each model, however, differences in their underlying assumptions made them incomparable. The most complex minute ventilation model, with heart rate as a variable, has shown slightly lower uncertainty than the model using fewer variables. Similarly, among the non-heart rate models, the one using real-time activity data has less uncertainty. Minute ventilation models contribute the most to the overall intake dose model uncertainty, followed closely by the low-cost personal activity monitors. The lack of a common methodology to assess the intake dose and quantifying related uncertainties is evident and should be a subject of further research. Full article

Physiology-Based BioKinetic (PBBK) models are of increasing interest in modern risk assessment, providing quantitative information regarding the absorption, metabolism, distribution, and excretion (ADME). They focus on the estimation of the effective dose at target sites, aiming at the identification of xenobiotic levels that are able to result in perturbations to the biological pathway that are potentially associated with adverse outcomes. The current study aims at the development of a lifetime PBBK model that covers a large chemical space, coupled with a framework for human biomonitoring (HBM) data assimilation. The methodology developed herein was demonstrated in the case of bisphenol A (BPA), where exposure analysis was based on European HBM data. Based on our calculations, it was found that current exposure levels in Europe are below the temporary Tolerable Daily Intake (t-TDI) of 4 μg/kg_bw/day proposed by the European Food Safety Authority (EFSA). Taking into account age-dependent bioavailability differences, internal exposure was estimated and compared with the biologically effective dose (BED) resulting from translating the EFSA temporary total daily intake (t-TDI) into equivalent internal dose and an alternative internal exposure reference value, namely biological pathway altering dose (BPAD); the use of such a refined exposure metric, showed that environmentally relevant exposure levels are below the concentrations associated with the activation of biological pathways relevant to toxicity based on High Throughput Screening (HTS) in vitro studies. Full article

The advent of the exposome concept, the advancement of mobile technology, sensors, and the “internet of things” bring exciting opportunities to exposure science. Smartphone apps, wireless devices, the downsizing of monitoring technologies, along with lower costs for such equipment makes it possible for various aspects of exposure to be measured more easily and frequently. We discuss possibilities and lay out several criteria for using smart technologies for external exposome studies. Smart technologies are evolving quickly, and while they provide great promise for advancing exposure science, many are still in developmental stages and their use in epidemiology and risk studies must be carefully considered. The most useable technologies for exposure studies at this time relate to gathering exposure-factor data, such as location and activities. Development of some environmental sensors (e.g., for some air pollutants, noise, UV) is moving towards making the use of these more reliable and accessible to research studies. The possibility of accessing such an unprecedented amount of personal data also comes with various limitations and challenges, which are discussed. The advantage of improving the collection of long term exposure factor data is that this can be combined with more “traditional” measurement data to model exposures to numerous environmental factors. Full article

The objective of the current study was the development of a reliable modeling platform to calculate in real time the personal exposure and the associated health risk for filling station employees evaluating current environmental parameters (traffic, meteorological and amount of fuel traded) determined by the appropriate sensor network. A set of Artificial Neural Networks (ANNs) was developed to predict benzene exposure pattern for the filling station employees. Furthermore, a Physiology Based Pharmaco-Kinetic (PBPK) risk assessment model was developed in order to calculate the lifetime probability distribution of leukemia to the employees, fed by data obtained by the ANN model. Bayesian algorithm was involved in crucial points of both model sub compartments. The application was evaluated in two filling stations (one urban and one rural). Among several algorithms available for the development of the ANN exposure model, Bayesian regularization provided the best results and seemed to be a promising technique for prediction of the exposure pattern of that occupational population group. On assessing the estimated leukemia risk under the scope of providing a distribution curve based on the exposure levels and the different susceptibility of the population, the Bayesian algorithm was a prerequisite of the Monte Carlo approach, which is integrated in the PBPK-based risk model. In conclusion, the modeling system described herein is capable of exploiting the information collected by the environmental sensors in order to estimate in real time the personal exposure and the resulting health risk for employees of gasoline filling stations. Full article