Search Results (12)

Navigational aids play a vital role in enhancing the mobility and independence of blind and visually impaired (VI) individuals. However, existing solutions often present challenges related to discomfort, complexity, and limited ability to provide detailed environmental awareness. To address these limitations, we introduce SnapStick, an innovative assistive technology designed to improve spatial perception and navigation. SnapStick integrates a Bluetooth-enabled smart cane, bone-conduction headphones, and a smartphone application powered by the Florence-2 Vision Language Model (VLM) to deliver real-time object recognition, text reading, bus route detection, and detailed scene descriptions. To assess the system’s effectiveness and user experience, eleven blind participants evaluated SnapStick, and usability was measured using the System Usability Scale (SUS). In addition to the 94% accuracy, the device received an SUS score of 84.7%, indicating high user satisfaction, ease of use, and comfort. Participants reported that SnapStick significantly improved their ability to navigate, recognize objects, identify text, and detect landmarks with greater confidence. The system’s ability to provide accurate and accessible auditory feedback proved essential for real-world applications, making it a practical and user-friendly solution. These findings highlight SnapStick’s potential to serve as an effective assistive device for blind individuals, enhancing autonomy, safety, and navigation capabilities in daily life. Future work will explore further refinements to optimize user experience and adaptability across different environments. Full article

This study explores the use of Halloysite NanoTubes (HNTs) as photocatalysts capable of decomposing organic dyes under exposure to visible or ultraviolet light. Through a systematic series of photocatalytic experiments, we unveil that the photodegradation of Rhodamine B, used as a model cationic dye, is significantly accelerated in the presence of HNTs. We observe that the extent of RhB photocatalytic degradation in 100 min in the presence of the HNTs is ~four times higher compared to that of bare RhB. Moreover, under optimized conditions, the as-extracted photodegradation rate of RhB (~0.0022 min⁻¹) is comparable to that of the previously reported work on the photodegradation of RhB in the presence of tubular nanostructures. A parallel effect is observed for anionic Coumarin photodegradation, albeit less efficiently. Our analysis attributes this discrepancy to the distinct charge states of the two dyes, influencing their attachment sites on HNTs. Cationic Rhodamine B molecules preferentially attach to the outer surface of HNTs, while anionic Coumarin molecules tend to attach to the inner surface. By leveraging the unique properties of HNTs, a family of naturally occurring nanotube structures, this research offers valuable insights for optimizing photocatalytic systems in the pursuit of effective and eco-friendly solutions for environmental remediation. Full article

In this study, we introduce novel microporous poly(D,L-lactide) acid–carbon nanodot (PLA-CD) nanocomposite scaffolds tailored for potential applications in image-guided bone regeneration. Our primary objective was to investigate concentration-dependent structural variations and their relevance to cell growth, crucial aspects in bone regeneration. The methods employed included comprehensive characterization techniques such as DSC/TGA, FTIR, rheological, and degradation assessments, providing insights into the scaffolds’ thermoplastic behavior, microstructure, and stability over time. Notably, the PLA-CD scaffolds exhibited distinct self-fluorescence, which persisted after 21 days of incubation, allowing detailed visualization in various multicolor modalities. Biocompatibility assessments were conducted by analyzing human adipose-derived stem cell (hADSC) growth on PLA-CD scaffolds, with results substantiated through cell viability and morphological analyses. hADSCs reached a cell viability of 125% and penetrated throughout the scaffold after 21 days of incubation. These findings underscore the scaffolds’ potential in bone regeneration and fluorescence imaging. The multifunctional nature of the PLA-CD nanocomposite, integrating diagnostic capabilities with tunable properties, positions it as a promising candidate for advancing bone tissue engineering. Our study not only highlights key aspects of the investigation but also underscores the scaffolds’ specific application in bone regeneration, providing a foundation for further research and optimization in this critical biomedical field. Full article

Nanographenes (NGs) have been attracting widespread interest since they combine peculiar properties of graphene with molecular features, such as bright visible photoluminescence. However, our understanding of the fundamental properties of NGs is still hampered by the high degree of heterogeneity usually characterizing most of these materials. In this context, NGs obtained by atomically precise synthesis routes represent optimal benchmarks to unambiguously relate their properties to well-defined structures. Here we investigate in deep detail the optical response of three curved hexa-peri-hexabenzocoronene (HBC) derivatives obtained by atomically precise synthesis routes. They are constituted by the same graphenic core, characterized by the presence of a heptagon ring determining a saddle distortion of their sp² network, and differ from each other for slightly different edge functionalization. The quite similar structure allows for performing a direct comparison of their spectroscopic features, from steady-state down to the femtosecond scale, and precisely disentangling the role played by the different edge chemistry. Full article

Carbon quantum dots (CQDs) are a new class of carbon-rich materials with a range of unique optical and structural properties. They can be defined as carbon nanoparticles, with sizes in the range of 1–10 nm, displaying absorption and emission activities in the UV-VIS range. Depending on the structure, CQDs display a wide variability of properties, which provides the possibility of finely tuning them for several applications. The great advantages of CQDs are certainly the ease of synthesis, non-toxicity, and the strong interactions with the surrounding environment. Based on this, CQDs are especially promising as selective chemosensors. The present study reports on carbon quantum dots synthesized with a top-down (TD) approach, and characterized by different optical, spectroscopic, and morphological techniques to identify the selectivity for metal ions belonging to the first transition series. In particular, the study focuses on the interaction between two samples, namely TD and TDA, featuring different surface functionalization, and heavy metal ions. Their sensing towards Co²⁺, Cu²⁺, Fe³⁺, Zn²⁺, and Ni²⁺ has been tested by fluorescence (PL), steady state absorption spectroscopy, and time-resolved PL spectroscopy, in order to determine the fluorescence quenching. We found a PL quenching in the presence of concentrations of metal salts starting from 0.5 µM, and a selectivity towards the interacting ions, depending on CQDs’ surface features paving the way for their use for sensing. Full article

Carbon nanodots (CDs) are a new class of fluorescent carbon-based nanomaterials characterized by a plethora of morphologies and sizes. Among these, we can include two different types of CDs, namely, graphitic and diamond-like. This wide range of structures opens up the possibility to design different CDs, with tunable optical properties accordingly to the synthesis method and precursors used. We prepared two different CDs following a bottom-up approach by thermally induced decomposition of organic precursors (namely, citric acid and urea in different molar ratios), and using purification by Size Exclusion Chromatography (SEC). Obtained CDs were characterized by Raman, absorption and fluorescence (PL) spectroscopies to understand structural and optical properties, and by atomic force microscopy (AFM) to elucidate morphology. They feature graphitic and diamond-like carbon structures with highly efficient visible emissions. Their sensing towards Cd and Hg heavy metals has been tested by PL experiments. We found a PL quenching in the presence of concentrations of metal salts starting from 0.5 μM and a selectivity towards the interacting ions, depending on the CDs structure, enabling using them for sensing. Furthermore, preliminary experiments suggest that these dots can also be used in principle as sensors of common pesticides. Considering the advantages of carbon dots with respect to other nanomaterials, such as non-toxicity, low cost and ease of synthesis, we consider these results to be very promising in view of exploiting the optical response of carbon dots to fabricate in the near future a variety of pollutant-sensing devices. Full article

We report a study of carbon dots produced via bottom-up and top-down routes, carried out through a multi-technique approach based on steady-state fluorescence and absorption, time-resolved fluorescence spectroscopy, Raman spectroscopy, infrared spectroscopy, and atomic force microscopy. Our study focuses on a side-to-side comparison of the fundamental structural and optical properties of the two families of fluorescent nanoparticles, and on their interaction pathways with mercury ions, which we use as a probe of surface emissive chromophores. Comparison between the two families of carbon dots, and between carbon dots subjected to different functionalization procedures, readily identifies a few key structural and optical properties apparently common to all types of carbon dots, but also highlights some critical differences in the optical response and in the microscopic mechanism responsible of the fluorescence. The results also provide suggestions on the most likely interaction sites of mercury ions at the surface of carbon dots and reveal details on mercury-induced fluorescence quenching that can be practically exploited to optimize sensing applications of carbon dots. Full article

Carbon nanodots (CDs) have recently attracted attention in the field of nanomedicine because of the biocompatibility, cost-effective nature, high specific surface, good near infrared (NIR) photothermal conversion into heat and tunable fluorescence properties, which have paved the way toward incorporating use of CDs into innovative anticancer theranostic platforms. However, a reliable synthesis of CDs with established and controlled physiochemical proprieties is precluded owing to the lack of full manipulation of thermodynamic parameters during the synthesis, thus limiting their use in real world medical applications. Herein, we developed a robust solvothermal protocol which allow fine controlling of temperature and pressure in order to obtain CDs with tunable properties. We obtained different CDs by modulating the operating pressure (from 8 to 18.5 bar) during the solvothermal decomposition of urea and citric acid in N,N-dimethylformamide at fixed composition. Atomic force microscopy (AFM), Fourier transform infrared (FTIR), ultraviolet-visible (UV-vis) and fluorescence spectroscopy were used to assess the role of pressure in influencing size, optical and surface properties of the obtained CDs. While preliminary biological and anticancer performance of CDs was established on the MDA-MB-231 cell line, used as triple negative breast cancer model. Our results indicate that pressure impinge on the formation of carbon nanoparticles under solvothermal conditions and impart desired optical, size distribution, surface functionalization and anticancer properties in a facile way. However, we have highlighted that a strategic surface engineering of these CDs is needed to limit the adsorption of corona proteins and also to increase the average surface diameter, avoiding a rapid renal clearance and improving their therapeutic efficacy in vivo. Full article

Graphene (Gr)—a single layer of two-dimensional sp² carbon atoms—and Carbon Dots (CDs)—a novel class of carbon nanoparticles—are two outstanding nanomaterials, renowned for their peculiar properties: Gr for its excellent charge-transport, and CDs for their impressive emission properties. Such features, coupled with a strong sensitivity to the environment, originate the interest in bringing together these two nanomaterials in order to combine their complementary properties. In this work, the investigation of a solid-phase composite of CDs deposited on Gr is reported. The CD emission efficiency is reduced by the contact of Gr. At the same time, the Raman analysis of Gr demonstrates the increase of Fermi energy when it is in contact with CDs under certain conditions. The interaction between CDs and Gr is modeled in terms of an electron-transfer from photoexcited CDs to Gr, wherein an electron is first transferred from the carbon core to the surface states of CDs, and from there to Gr. There, the accumulated electrons determine a dynamical n-doping effect modulated by photoexcitation. The CD–graphene interaction unveiled herein is a step forward in the understanding of the mutual influence between carbon-based nanomaterials, with potential prospects in light conversion applications. Full article

Carbon dots (C-dots) are well-known for their strong sensitivity to the environment, which reflects on intensity and shape changes of their fluorescence, induced by various interacting ions and molecules in solution. Although these interactions have been extensively studied in the last few years, especially in view of their possible sensing applications, the existing works have mostly focused on the quenching of C-dot fluorescence induced by metal cations. In fact, these latter easily bind to C-dots surfaces, which are negatively charged in most cases, promoting an electron transfer from the surface to them. Much less is known from the literature on the effect induced on C-dots by prototypical negative species in solutions, motivating more systematic studies on this different class of interactions. Here, we analyzed the effect of halogen ions on the fluorescence of C-dots, by combining steady-state optical absorption and photoluminescence, time-resolved fluorescence and femtosecond pump/probe spectroscopy. We demonstrate a quenching effect of C-dots fluorescence in the presence of halogen ions, which becomes more and more pronounced with increasing atomic number of the halogens, being negligible for chloride, appreciable for bromide and stronger for iodide. We find that quenching is mostly static, due to the binding of halogen ions on suitable surface sites at C-dots surfaces, while collisional quenching becomes obvious only at very high iodide concentrations. Finally, nanosecond and femtosecond time-resolved spectroscopies provide information on the quenching mechanism and time scales. Based on these data, we propose that the fluorescent state is deactivated by intersystem crossing to a dark triplet state, induced by close-range interactions with the heaviest halogen ions. Full article

We carried out a cryogenic investigation on the optical properties of carbon dots, aiming to better understand their emission mechanism and the role of the solvent. The solvatochromic Stokes shift is quantified by a low temperature approach which allows freezing of the photo-excited state of carbon dots, preventing any solvation relaxation. Moreover, the reduction in temperature helps to identify the dynamical inhomogeneous contribution to the broadening of the emission band; therefore, disentangling the role of solvent from other types of broadening, such as the homogeneous and the static inhomogeneous contributions. Full article

Carbon dots (CDs) are an emerging family of nanosystems displaying a range of fascinating properties. Broadly speaking, they can be described as small, surface-functionalized carbonaceous nanoparticles characterized by an intense and tunable fluorescence, a marked sensitivity to the environment and a range of interesting photochemical properties. CDs are currently the subject of very intense research, motivated by their possible applications in many fields, including bioimaging, solar energy harvesting, nanosensing, light-emitting devices and photocatalyis. This review covers the latest advancements in the field of CDs, with a focus on the fundamental understanding of their key photophysical behaviour, which is still very debated. The photoluminescence mechanism, the origin of their peculiar fluorescence tunability, and their photo-chemical interactions with coupled systems are discussed in light of the latest developments in the field, such as the most recent results obtained by femtosecond time-resolved experiments, which have led to important steps forward in the fundamental understanding of CDs. The optical response of CDs appears to stem from a very complex interplay between the electronic states related to the core structure and those introduced by surface functionalization. In addition, the structure of CD energy levels and the electronic dynamics triggered by photo-excitation finely depend on the microscopic structure of any specific sub-type of CD. On the other hand, this remarkable variability makes CDs extremely versatile, a key benefit in view of their very wide range of applications. Full article