Mathematics

Mathematical Modelling for Cooperative Communications

edited by

Yuyang Peng

,

Jun Li

and Han Hai

submission deadline 30 Aug 2025 | 1 articles | Viewed by 685 | Submission Open

Keywords: modulation technologies; UAV communications; system optimization; security communications; algorithms; applications; IRS communications; interdisciplinary areas

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Applied Mathematics and Intelligent Control in Electrical Engineering

edited by

Helga Silaghi

and

Claudiu Raul Costea

submission deadline 31 Aug 2025 | 10 articles | Viewed by 19618 | Submission Open

Keywords: applied mathematics; mathematical modelling; numerical methods; numerical simulation; electrical engineering; electrical machines; electrical drive systems; artificial intelligence; power electronics; industrial applications; special electric drives; control of electric vehicles; energy systems; robotic systems

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advanced Model Optimization and Data Fusion Methods in Aircraft

edited by

Gang Sun

and Liyue Wang

submission deadline 31 Aug 2025 | 2 articles | Viewed by 8332 | Submission Open

Keywords: advanced model; optimization; aircraft; aircraft design; data-driven method; data fusion; digital twin

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Robust Perception and Control in Prognostic Systems

edited by Song Tang and Mao Ye

submission deadline 31 Aug 2025 | 6 articles | Viewed by 5187 | Submission Open

Keywords: robust perception and control; prognostic systems; unsupervised and semi-supervised learning; transfer learning; adaptive system; AI security

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Numerical Simulation and Computational Methods in Engineering and Sciences, 2nd Edition

edited by

Zhuojia Fu

,

Yiqian He

and

Hui Zheng

submission deadline 31 Aug 2025 | 1 articles | Viewed by 2778 | Submission Open

Keywords: science and engineering problems; multi-physics problems; numerical simulation; computational methods; multiscale methods; advanced finite element methods; boundary element method; scaled boundary finite element method; meshless and particle methods; discrete element methods

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Methods Based on Control Theory

edited by Massimiliano d'Angelo, Valerio Cusimano and Giovanni Palombo

submission deadline 31 Aug 2025 | 1 articles | Viewed by 412 | Submission Open

Keywords: hybrid feedback control design; stochastic systems; contraction theory; infinitedimensional systems; data-driven methods; optimization and game theory; multi-agent systems; sensor networks; systems biology; energy systems; control for machine learning

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Intelligent Robots Control and Navigation and Their Mathematical Methods and Insights

edited by

Paolo Mercorelli

,

Oleg Sergiyenko

and

Oleksandr Tsymbal

submission deadline 20 Sep 2025 | 3 articles | Viewed by 4581 | Submission Open

Keywords: mathematics problems in robot motion and grasp; robot control; robot optimal control; robot stability and analysis of the dynamics; robot motion planning and navigation

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Intelligent Control and Optimization in Manufacturing

edited by

Giulio Mattera

and

Silvestro Vespoli

submission deadline 20 Sep 2025 | Viewed by 224 | Submission Open

Keywords: machine learning in manufacturing; reinforcement learning in manufacturing; process monitoring and optimization; digital twin technology; energy-efficient manufacturing; path planning and resource optimization

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Artificial Intelligence Techniques Applications on Power Systems

edited by

Stavros D. Kaminaris

submission deadline 30 Sep 2025 | 9 articles | Viewed by 19595 | Submission Open

Keywords: artificial intelligence techniques; power system engineering; power systems; neural network; fuzzy systems; expert systems

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Machine Learning Methods and Mathematical Modeling with Applications

edited by Jian Luo, Zheming Gao and Xin Yan

submission deadline 30 Sep 2025 | 12 articles | Viewed by 17626 | Submission Open

Keywords: machine learning; mathematical modeling; industrial engineering; forecasting methods; management science

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Intelligent Systems and Dynamic Scheduling: Optimization and Management

edited by

Yaqiong Lv

and

Shuzhu Zhang

submission deadline 30 Sep 2025 | 5 articles | Viewed by 5892 | Submission Open

Keywords: mathematical modeling; intelligent systems; dynamic scheduling; evolutionary computation; intelligent fault diagnosis; combinatorial optimization; operations research; intelligent computing; real-time decision making; reinforcement learning

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Numerical and Computational Methods in Engineering

edited by

Qinghe Yao

and Weide Liu

submission deadline 30 Sep 2025 | 4 articles | Viewed by 5359 | Submission Open

Keywords: applied mathematics; numerical methods for partial differential equations; computational mechanics; optimization algorithms; structural analysis; heat and mass transfer simulation; computational electromagnetics; multi-physics simulations; computational materials science; high-performance computing; data-driven algorithms; big data analysis; machine learning in engineering

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Application of Mathematical Methods in Industrial Engineering and Management: 2nd Edition

edited by

Yi-Kuei Lin

submission deadline 30 Sep 2025 | 2 articles | Viewed by 3664 | Submission Open

Keywords: operation research applications; statistics applications; optimization; mathematical modeling; reliability; decision analysis; artificial intelligence applications

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Recent Developments in Disturbance Rejection Control Theory and Applications

edited by Zhenhua Zhao, Ting Li and Huiming Wang

submission deadline 30 Sep 2025 | 1 articles | Viewed by 442 | Submission Open

Keywords: disturbance rejection control; active disturbance rejection control; robust control; nonlinear control; mechatronic systems; flight control systems; power electric systems; mobile robots; nonlinear control system

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Optimization and Metaheuristics: Applications and Integration with Artificial Intelligence

edited by

Ivona Brajević

submission deadline 30 Sep 2025 | Viewed by 260 | Submission Open

Keywords: mathematical optimization; metaheuristics; artificial intelligence; real-world applications; neural networks

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Analysis of Robotics and Mechanisms

edited by

,

,

and

submission deadline 15 Oct 2025 | 1 articles | Viewed by 3858 | Submission Open

Keywords: mathematics in robots modelling; planning; and control; algorithms for optimization of robots modelling; planning; and control; optimal design of parallel robots; novel mathematical techniques to model the motion; forces; and kinematics of robots and mechanisms; and to analyse their performance and behaviour; novel algorithms in motion planning and control: the development of algorithms and techniques to enable robots to move smoothly and efficiently from one location to another; while avoiding obstacles and other hazards; AI; intelligent control; neuro-control; fuzzy control and their applications; smart manufacturing; biomedical and rehabilitation engineering; welfare robotics and mechatronics; bionic robot navigation; task; and motion planning; bionic robotics; autonomous and evolutionary robotics; biomimetic robotics; industrial automation; process control; manufacturing process; intelligent control and AI in mechatronics; intelligent mechatronics; automation; control systems; locomotion and manipulation in biological and robot systems; rehabilitation robot system; neuro-robotics; wearable robots; robot intelligence and learning; robot vision and audition; soft robotics; robotic systems modeling; optimization; simulation; and experiments; robots and automation; robotic grasping and manipulation; sensor design; sensor fusion; sensor networks; human– robot interaction; universal design and services; ubiquitous robots and devices

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advances in Perception, Control and Optimization Methods in Intelligent Transportation Systems

edited by Haifeng Song, Min Zhou and Xiaoqing Zeng

submission deadline 18 Oct 2025 | 9 articles | Viewed by 10569 | Submission Open

Keywords: intelligent transportation systems (ITS); control theory in transportation; traffic flow optimization; model predictive control (MPC); intelligent perception technologies; machine learning for ITS; advanced routing algorithms; optimization methods in transportation; autonomous vehicle technologies; sustainable urban transport

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advanced Control of Complex Dynamical Systems and Robotics with Applications

edited by Gang Wang,

Chaoli Wang

and Qingdu Li

submission deadline 20 Oct 2025 | 8 articles | Viewed by 11180 | Submission Open

Keywords: modeling and control of robotics; machine learning algorithms; complex systems and stability analysis; distributed control of multiagent systems

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Artificial Intelligence and Optimization in Aircraft Design and Unmanned Aerial Vehicles, 2nd Edition

edited by

Xiaosong Du

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1732 | Submission Open

Keywords: urban air mobility; drones; aircraft; artificial intelligence; design optimization; surrogate modeling; optimal trajectory design; optimal experimental design

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Intelligent Control and Real-World Applications

edited by

Somyot Kaitwanidvilai

submission deadline 20 Oct 2025 | Viewed by 217 | Submission Open

Keywords: AI-driven control systems and optimization; machine learning applications in intelligent control; adaptive and predictive control methodologies; autonomous systems and robotics; smart transportation and mobility solutions; intelligent energy management and industrial automation; fault diagnosis; cybersecurity; and resilient control systems; real-world implementation of intelligent control strategies; fuzzy logic; neural networks; and hybrid learning methods in intelligent control; intelligent control in adaptive or robust control systems

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematics and Its Applications in Science and Engineering, 3rd Edition

edited by

Fatih Yilmaz

,

Araceli Queiruga-Dios

,

Ion Mierlus-Mazilu

,

Deolinda M. L. Dias Rasteiro

and

Jesús Martín Vaquero

submission deadline 31 Oct 2025 | 4 articles | Viewed by 6884 | Submission Open

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Modern Trends in Computation and Control in Autonomous Robotics Systems

edited by Yujiong Liu

submission deadline 31 Oct 2025 | 2 articles | Viewed by 3950 | Submission Open

Keywords: dynamics and control; optimization; sensing and perception; localization and mapping; path planning; navigation; decision-making; intelligent control; machine learning and AI

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Intelligent Data Mining and Decision Making for Prognostics and Health Management

edited by

Mingliang Suo

submission deadline 31 Oct 2025 | 2 articles | Viewed by 2280 | Submission Open

Keywords: data mining; decision making; uncertainty measurement; information fusion; feature extraction; fault knowledge mining; sensor layout optimization; fault-tolerant control; fault reconstruction; fault detection; fault diagnosis; remaining useful life prediction; health status assessment; optimized maintenance; medical data analysis; big data; large language model

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Models in Mechanics and Engineering

edited by

Arnulfo Luévanos-Rojas

submission deadline 31 Oct 2025 | 2 articles | Viewed by 1019 | Submission Open

Keywords: mechanical engineering; structural and civil engineering; mechanics; mechanical problems; engineered structures; engineered systems; coupled mechanical systems; engineering problems; computational mechanics; structural dynamics; vibration analysis; mathematical; computational; and numerical methods

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Finite Element Method and Applications in Mathematical Modeling and Engineering: Modeling, Analysis, and Simulations

edited by

Shengdong Zhao

and

Yan Gu

submission deadline 31 Oct 2025 | Viewed by 415 | Submission Open

Keywords: finite element method; topology optimization; wave propagation; acoustic metamaterials; numerical PDEs; high-performance computing; inverse problems; engineering applications

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Computational Mechanics and Applied Mathematics, 2nd Edition

edited by

Matjaž Skrinar

submission deadline 31 Oct 2025 | Viewed by 106 | Submission Open

Keywords: computational mechanics; structural analysis; numerical procedures and mathematical methods

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Modeling, Control, and Optimization for Transportation Systems

edited by

A. S. M. Bakibillah

submission deadline 10 Nov 2025 | 2 articles | Viewed by 824 | Submission Open

Keywords: traffic flow modeling; vehicle dynamics modeling; car-following models; multi-modal transportation modeling; route choice behavior; microsimulation; simulation-based optimization; demand forecasting; adaptive traffic control systems; autonomous vehicle control; cooperative control systems; vehicle-to-infrastructure (V2I) communication; control theory in transportation; optimal routing; energy-efficient routing; parking management optimization; traffic assignment problem

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Numerical and Computational Methods in Structural Engineering and Mechanics, 2nd Edition

edited by

Joaquim Infante Barbosa

and

José Alberto Rodrigues

submission deadline 15 Nov 2025 | Viewed by 174 | Submission Open

Keywords: structural engineering; mechanical problems; fluid– structure interactions; soil– structure interactions; nonlinear vibration coupled problems structural reliability mathematical modeling multi-scale approaches; large-scale computation; multi-physical simulation; numerical schemes; optimization; control methods; ordinary differential equations; partial differential equations

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advanced Modeling and Design of Vibration and Wave Systems

edited by

Soo-Ho Jo

and

Haichao An

submission deadline 20 Nov 2025 | 3 articles | Viewed by 2946 | Submission Open

Keywords: nonlinear dynamics; multi-scale interactions; multi-physics systems; metastructures; phononic crystals; data-driven modeling; advanced analytical modeling; advanced numerical modeling; design optimization; physics-informed AI; AI-driven inverse design

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Modeling and Algorithmic Techniques for Engineering

edited by Ergude Bao

submission deadline 20 Nov 2025 | 1 articles | Viewed by 2036 | Submission Open

Keywords: engineering artificial intelligence; engineering algorithms; intelligent transportation systems; intelligent medical systems; intelligent signal processing

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advanced Control of Complex Dynamical Systems and Robotics with Applications, 2nd Edition

edited by Gang Wang, Qingdu Li and Hua Chen

submission deadline 20 Nov 2025 | 2 articles | Viewed by 1314 | Submission Open

Keywords: modelling and control of robotics; machine learning algorithms; complex systems and stability analysis; distributed control of multiagent system

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Optimization and Simulation in Mechanical Engineering and Computer Aided Design

edited by

lonuţ Gabriel Ghionea

,

Cristian Ioan Tarbă

and

Saša Ćuković

submission deadline 30 Nov 2025 | 5 articles | Viewed by 16588 | Submission Open

Keywords: topology optimization; simulation and optimization; applied mathematics; parametric modelling; complex curves and surfaces; mechanical engineering processes; computer aided design and applications; artificial intelligence algorithms

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Application of Mathematical Methods to Transportation: Modeling and Analysis

edited by

Gang Ren

and Qi Cao

submission deadline 30 Nov 2025 | 10 articles | Viewed by 15699 | Submission Open

Keywords: transportation modeling and analysis; traffic flow prediction and control; vehicle routing; public transportation scheduling; multimodal transportation system simulation; passenger demand fluctuations; travel time variability; network resilience

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advanced Numerical and Computational Methods for Engineering and Applied Mathematical Problems, 2nd Edition

edited by

Lihua Wang

,

Benny Yiu-Chung Hon

and

Sheng-Wei Chi

submission deadline 30 Nov 2025 | 5 articles | Viewed by 5201 | Submission Open

Keywords: numerical methods; computational methods; machine learning; differential equations; inverse problems; engineering problems; computational mechanics; mathematical problems; coupled problems; numerical simulations; meshfree methods; finite element methods; radial basis functions methods; multiscale material modeling; machine learning methods; structural dynamics; material modelling; computational mechanics; fluid-structure interaction

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Application of Mathematical Modeling and Simulation to Transportation

edited by

Noureddine Lakouari

submission deadline 30 Nov 2025 | 3 articles | Viewed by 4266 | Submission Open

Keywords: intelligent transportation systems (ITSs); mathematical modeling; optimization; sustainable transportation; traffic flow theory; transportation challenges; transportation infrastructure; transportation networks

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Modelling and Optimization of Service Supply Chain, 2nd Edition

edited by

Yong He

submission deadline 30 Nov 2025 | 4 articles | Viewed by 4223 | Submission Open

Keywords: supply chain; service science; mathematical modeling; optimization; complex system; game theory; mathematical and numerical analysis of networks; operations management

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Optimization and Path Planning of Robotics

edited by

Enrique Garcia

submission deadline 30 Nov 2025 | 1 articles | Viewed by 665 | Submission Open

Keywords: optimization; path planning; collision avoidance; computational geometry; simulation

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Numerical Simulation and Analysis of Rock Mechanics Engineering Geology

edited by Alireza Ahangar-Asr

submission deadline 30 Nov 2025 | 1 articles | Viewed by 430 | Submission Open

Keywords: numerical modeling of rock mechanics; machine learning-enhanced geomechanics; multiphase flow simulation (CFD-DEM coupling); inverse problems in geological parameterization; uncertainty quantification in rock engineering

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Artificial Intelligence and Optimization Techniques for Wireless Sensor Networks

edited by

Rubén Ferrero-Guillén

,

Alberto Martínez-Gutiérrez

and

Javier Díez-González

submission deadline 30 Nov 2025 | Viewed by 329 | Submission Open

Keywords: wireless sensor networks; sensor deployment and coverage; target tracking and localization; sensor fusion and data aggregation; sensor calibration; fault detection and predictive maintenance; energy efficiency and network management; scalability of WSN

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advances in Intelligent Control Theory and Robotics

edited by

Fangfang Dong

, Jiang Han and Xiaomin Zhao

submission deadline 30 Nov 2025 | Viewed by 159 | Submission Open

Keywords: intelligent control; robotics; machine learning; autonomous systems; robotic manufacturing; swarm systems; adaptive control; cooperative control; smart factories; collaborative robots (cobots)

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Modeling for Dynamics, Simulation and Control of Robotic and Industrial Systems

edited by

Marta Covadonga Mora Aguilar

and

Joaquin Cerda Boluda

submission deadline 30 Nov 2025 | Viewed by 102 | Submission Open

Keywords: robotics; nonlinear dynamics; adaptive control; optimal control; distributed control; artificial intelligence; machine learning; design of physical systems; mechanical and electrical interactions of system components; mathematical modeling; dynamic behavior; system response analysis; numerical simulation; pattern recognition; computer vision

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Geometric Methods in Contemporary Engineering

edited by

Danail Brezov

submission deadline 10 Dec 2025 | 4 articles | Viewed by 3562 | Submission Open

Keywords: Lie groups and symmetries; Clifford’ s geometric algebra and calculus; applied differential geometry; graphs; knots; and computational topology; spectral geometry and geometric analysis; nonlinear dynamics and fractals; geometric deep learning

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Optimization in Transportation Engineering: 2nd Edition

edited by Qun Chen, Haibo Chen and Lianbo Deng

submission deadline 20 Dec 2025 | 3 articles | Viewed by 2031 | Submission Open

Keywords: transportation; planning; design; operation; transportation facilities; optimization; roads; railway; network; bus; intersection; signal control; station; parking facilities; travel behavior modeling; traffic demand analysis; passenger flow organization; traffic flow; intelligent transportation; autonomous driving; vehicle networking; shared transportation; mobility as a service; multimodal transport; logistics; planning; scheduling; path planning; facility allocation; navigation; aviation

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advanced Technologies for Modeling and Optimization of Control Systems and Biomedical Engineering

edited by

Shen Yan

submission deadline 20 Dec 2025 | 1 articles | Viewed by 1060 | Submission Open

Keywords: control systems; cyber-physical systems; networked control systems; IoT-based systems; artificial intelligence; dynamic systems; biomedical engineering

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematical Methods for AI-Enhanced Wireless Communications in Smart Cities

edited by

Mohammad Abrar Shakil Sejan

submission deadline 20 Dec 2025 | Viewed by 117 | Submission Open

Keywords: AI-based communication network design; wireless communication network; sensor network; AI-enabled 6G and beyond wireless communication; federated learning and edge AI in smart cities; intelligent reflective surfaces (IRS) for urban wireless network; graph neural networks in urban IoT systems; AI for spectrum management and resource allocation; machine learning for vehicular and drone communications; real-time wireless communication analytics using AI; secure and privacy-preserving AI in wireless networks; applications of AI-driven networks in traffic; energy; and public safety

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Mathematics Applied to Manufacturing and Logistics Systems

edited by

Francisco J. G. Silva

,

Luís Pinto Ferreira

and Isabel Cristina Mendes Pinto

submission deadline 25 Dec 2025 | 2 articles | Viewed by 5407 | Submission Open

Keywords: mathematical models; processes optimization; industrial management; logistics optimization; sustainability; costs reduction; quality optimization; process flow optimization; internal logistics optimization; external logistics optimization; optimization algorithms; industrial operations; robot path optimization; information flow optimization; optimization of the industry digitalization; case studies

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Modeling and Optimization of Complex Engineering Systems under Uncertainties

edited by

Debiao Meng

and Shui Yu

submission deadline 31 Dec 2025 | 8 articles | Viewed by 17651 | Submission Open

Keywords: Complex systems; Reliability; Control; Advanced modeling technology; Design optimization; Uncertainty-based design and optimization; Reliability-based design and optimization; Optimization methods; Uncertainty quantification and propagation; Multidisciplinary design optimization; Risk assessment; Fault diagnosis; Physics of failure; Reliability hazard analysis; Fuzzy reliability analysis; Uncertainty in engineering; Artificial intelligence; Machine learning

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Artificial Neural Networks and Dynamic Control Systems

edited by

P. Balasubramaniam

and

R. Vijay Aravind

submission deadline 31 Dec 2025 | 9 articles | Viewed by 13211 | Submission Open

Keywords: control systems; nonlinear systems; stability; synchronization analysis; fractional-order nonlinear systems; neural networks; mathematical modeling; fuzzy logics

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Computational Fluid Dynamics with Applications

edited by Sónia Isabel Silva Pinto

submission deadline 31 Dec 2025 | 6 articles | Viewed by 6480 | Submission Open

Keywords: computational fluid dynamics; computational programming; numerical methods; mathematical analysis; numerical simulations; fluids; thermal energy

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Advances in Artificial Intelligence, Machine Learning and Optimization

edited by Zne-Jung Lee and

Liang-Hung Wang

submission deadline 31 Dec 2025 | 8 articles | Viewed by 6245 | Submission Open

Keywords: artificial intelligence; machine learning; optimization; biocomputing; intelligent control; intelligent computing; data mining; deep learning; intelligent technologies and applications in engineering

(This special issue belongs to the Section E2: Control Theory and Mechanics)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI