The investigation of piezoelectricity in polysaccharides constitutes an important field of research in the last decades due to the increasing interest in green electronics and wearable biomedical applications. Chitosan is recognized as a functional material due to its intrinsic properties, such as non-toxicity and antibacterial activity, biocompatibility, and capacity to degrade in nature. There have been different results measured in chitosan structures, making it challenging to identify whether the piezoelectric effect is due to electrostrictive behavior, surface charges or dipole alignment. Additionally, shear piezoelectricity has been reported for this biopolymer. As it is noted, their electrical properties are still under investigation to understand its electromechanical performance. In this work, chitosan films have been fabricated with two standard acidic solutions (acetic vs. lactic acids). Some of them were neutralized to evaluate the effect of the functional OH groups in the surface. A systematic characterization of the chitosan-based films was done. The microstructure and physical characterization were realized using the X-Ray diffraction and FTIR techniques. The microstructure measurements are correlated with piezoelectric-response force microscopy (PFM) and Kelvin probe force microscopy (KPFM) to identify the contribution of distinct mechanisms at the microscale in chitosan-based films. In addition, the effect of different acidic media and the neutralization procedure is also analyzed. The apparent piezoresponse given by the PFM signal may arise by different mechanisms; therefore, the analysis of the second harmonic is approached to identify them. Microstructure characterization suggests that films made with acetic acid tend to be more crystalline, presenting a more defined characteristic peak of chitosan around 2θ = 20°. Furthermore, films fabricated with acetic acid are less hydrophilic, which confirms a relation between crystallinity and water absorption properties. The second harmonic signal is higher than the first harmonic signal, which suggest that the PFM signal is dominated by electrostriction, electrostatics, or charge injection phenomena.
Author Contributions
Conceptualization, B.J.R., P.M.V. and P.F.; methodology, D.G., S.K.; software, D.G. and S.K.; validation, D.G., S.K. and B.J.R.; formal analysis, D.G., S.K., B.J.R.; investigation, D.G., P.F. and C.N.; resources, P.F., B.J.R.; data curation, P.M.V., C.N. and B.J.R.; writing—original draft preparation, D.G.; writing—review and editing, D.G., B.J.R., P.F., P.M.V. and C.N.; visualization, D.G..; supervision, P.F. and C.N.; project administration, P.F.; funding acquisition, P.F. and D.G. All authors have read and agreed to the published version of the manuscript.
Funding
This research was funded by: the project CICECO-Aveiro Institute of Materials (UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020) through the FCT/MEC (PIDDAC) and by NANOTRONICS (IF/00300/2015); FLEXIDEVICE (PTDC/CTM-CTM/29671/2017) through the FCT/MCTES under COMPETE, FEDER and Portugal 2020. FCT PhD grant (ref. UI/BD/151142/2021) and grant IF/00300/2015. CN is grateful to Portuguese national funds (OE), through FCT, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19.
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
Not applicable.
Acknowledgments
The authors acknowledge the organization committee of the “Materials 2022 conference”.
Conflicts of Interest
The authors declare no conflict of interest.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).