Article Versions Notes

Komitov N, Munev Y, Terziyska M, Sestrimska M, Mengov V, Nikolov A. Design and Implementation of a 3D-Printed Robotic Arm Model with Five Degrees of Freedom Using an ESP32 Microcontroller for Control. Engineering Proceedings. 2026; 154(1):3. https://doi.org/10.3390/engproc2026154003

Komitov, Nikolay, Yosif Munev, Margarita Terziyska, Mariyana Sestrimska, Veselin Mengov, and Angel Nikolov. 2026. "Design and Implementation of a 3D-Printed Robotic Arm Model with Five Degrees of Freedom Using an ESP32 Microcontroller for Control" Engineering Proceedings 154, no. 1: 3. https://doi.org/10.3390/engproc2026154003

Komitov, N., Munev, Y., Terziyska, M., Sestrimska, M., Mengov, V., & Nikolov, A. (2026). Design and Implementation of a 3D-Printed Robotic Arm Model with Five Degrees of Freedom Using an ESP32 Microcontroller for Control. Engineering Proceedings, 154(1), 3. https://doi.org/10.3390/engproc2026154003