Next Article in Journal
Dimensional and Surface Quality Evaluation of Inconel 718 Alloy After Grinding with Environmentally Friendly Cooling-Lubrication Technique and Graphene Enriched Cutting Fluid
Next Article in Special Issue
The Influence of Sheet Layer Combination Modes on Mechanical Property of Self-Piercing Riveting Joint in Three-Layer Sheets
Previous Article in Journal
An Analytical Turbulence Model for Squeeze Film Damper Short-Bearing Analysis
Previous Article in Special Issue
Multi-Objective Optimization Based on Kriging Surrogate Model and Genetic Algorithm for Stiffened Panel Collapse Assessment
 
 
Article

Article Versions Notes

Appl. Mech. 2025, 6(3), 49; https://doi.org/10.3390/applmech6030049
Action Date Notes Link
article xml file uploaded 1 July 2025 14:28 CEST Original file -
article xml uploaded. 1 July 2025 14:28 CEST Update https://www.mdpi.com/2673-3161/6/3/49/xml
article pdf uploaded. 1 July 2025 14:28 CEST Version of Record https://www.mdpi.com/2673-3161/6/3/49/pdf
article html file updated 1 July 2025 14:31 CEST Original file -
article html file updated 28 August 2025 08:40 CEST Update -
article html file updated 15 September 2025 08:03 CEST Update https://www.mdpi.com/2673-3161/6/3/49/html
Back to TopTop