Next Article in Journal
Optimization of Process Parameters for Advanced High-Strength Steel JSC980Y Automotive Part Using Finite Element Simulation and Deep Neural Network
Next Article in Special Issue
Size Effects on Process-Induced Porosity in Ti6Al4V Thin Struts Additively Manufactured by Laser Powder-Bed Fusion
Previous Article in Journal
A Novel Method for Manufacturing Molds for CFRP Prepreg Lamination Using Polymeric Acrylic Resin–Aluminum Trihydrate
Previous Article in Special Issue
Effect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive Manufacturing
 
 
Review

Article Versions Notes

J. Manuf. Mater. Process. 2025, 9(6), 196; https://doi.org/10.3390/jmmp9060196
Action Date Notes Link
article pdf uploaded. 11 June 2025 15:05 CEST Version of Record https://www.mdpi.com/2504-4494/9/6/196/pdf-vor
article xml file uploaded 12 June 2025 07:58 CEST Original file -
article xml uploaded. 12 June 2025 07:58 CEST Update -
article pdf uploaded. 12 June 2025 07:58 CEST Updated version of record https://www.mdpi.com/2504-4494/9/6/196/pdf-vor
article html file updated 12 June 2025 08:02 CEST Original file -
article xml file uploaded 12 June 2025 08:06 CEST Update -
article xml uploaded. 12 June 2025 08:06 CEST Update -
article pdf uploaded. 12 June 2025 08:06 CEST Updated version of record https://www.mdpi.com/2504-4494/9/6/196/pdf-vor
article html file updated 12 June 2025 08:08 CEST Update -
article xml file uploaded 12 June 2025 08:08 CEST Update -
article xml uploaded. 12 June 2025 08:09 CEST Update https://www.mdpi.com/2504-4494/9/6/196/xml
article pdf uploaded. 12 June 2025 08:09 CEST Updated version of record https://www.mdpi.com/2504-4494/9/6/196/pdf
article html file updated 12 June 2025 08:12 CEST Update -
article html file updated 25 June 2025 09:10 CEST Update https://www.mdpi.com/2504-4494/9/6/196/html
Back to TopTop