Next Article in Journal
Innovative Fabrication Design for In Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy
Next Article in Special Issue
Cemented Carbide End-Mill Edge Preparation Using Dry-Electropolishing
Previous Article in Journal
Wear of Carbide Plates with Diamond-like and Micro-Nano Polycrystalline Diamond Coatings during Interrupted Cutting of Composite Alloy Al/SiC
Previous Article in Special Issue
Temperature and Wear Analysis of Adhesively Bonded and Soldered Cutting Tools for Woodcutting
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2023, 7(6), 225; https://doi.org/10.3390/jmmp7060225
Action Date Notes Link
article xml file uploaded 13 December 2023 10:58 CET Original file -
article xml uploaded. 13 December 2023 10:58 CET Update -
article pdf uploaded. 13 December 2023 10:58 CET Version of Record https://www.mdpi.com/2504-4494/7/6/225/pdf-vor
article html file updated 13 December 2023 11:00 CET Original file -
article xml file uploaded 13 December 2023 13:02 CET Update -
article xml uploaded. 13 December 2023 13:02 CET Update -
article pdf uploaded. 13 December 2023 13:02 CET Updated version of record https://www.mdpi.com/2504-4494/7/6/225/pdf-vor
article html file updated 13 December 2023 13:04 CET Update -
article xml file uploaded 22 December 2023 03:50 CET Update -
article xml uploaded. 22 December 2023 03:50 CET Update https://www.mdpi.com/2504-4494/7/6/225/xml
article pdf uploaded. 22 December 2023 03:50 CET Updated version of record https://www.mdpi.com/2504-4494/7/6/225/pdf
article html file updated 22 December 2023 03:52 CET Update https://www.mdpi.com/2504-4494/7/6/225/html
Back to TopTop