Next Article in Journal
Development of an Additive Manufacturing System for the Deposition of Thermoplastics Impregnated with Carbon Fibers
Previous Article in Journal
Balancing WAAM Production Costs and Wall Surface Quality through Parameter Selection: A Case Study of an Al-Mg5 Alloy Multilayer-Non-Oscillated Single Pass Wall
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2019, 3(2), 34; https://doi.org/10.3390/jmmp3020034
Action Date Notes Link
article html file updated 30 August 2025 14:12 CEST Update https://www.mdpi.com/2504-4494/3/2/34/html
article html file updated 21 August 2025 20:44 CEST Update -
article html file updated 19 July 2022 17:45 CEST Update -
article html file updated 12 February 2020 06:45 CET Update -
article html file updated 18 October 2019 17:39 CEST Update -
article html file updated 25 April 2019 08:45 CEST Update -
article html file updated 23 April 2019 11:26 CEST Update -
article pdf uploaded. 23 April 2019 11:24 CEST Updated version of record https://www.mdpi.com/2504-4494/3/2/34/pdf
article xml uploaded. 23 April 2019 11:24 CEST Update https://www.mdpi.com/2504-4494/3/2/34/xml
article xml file uploaded 23 April 2019 11:24 CEST Update -
article html file updated 20 April 2019 11:43 CEST Original file -
article pdf uploaded. 20 April 2019 11:41 CEST Version of Record https://www.mdpi.com/2504-4494/3/2/34/pdf-vor
article xml uploaded. 20 April 2019 11:41 CEST Update -
article xml file uploaded 20 April 2019 11:41 CEST Original file -
Back to TopTop