Next Article in Journal
Application of Carbon Dioxide Snow in Machining of CGI using an Additively Manufactured Turning Tool
Next Article in Special Issue
An Investigation of the Influence of a Micro-Textured Ball End Cutter’s Different Parameters on the Surface Residual Stress of a Titanium Alloy Workpiece
Previous Article in Journal
Towards Optimization of μ-Injection Molding Process for a New V-Shaped Geometrical Component Using X-ray CT-Based Quality Characterization
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2019, 3(1), 14; https://doi.org/10.3390/jmmp3010014
Action Date Notes Link
article xml file uploaded 23 January 2019 07:02 CET Original file -
article pdf uploaded. 23 January 2019 07:02 CET Version of Record https://www.mdpi.com/2504-4494/3/1/14/pdf-vor
article supplementary file uploaded. 23 January 2019 07:02 CET - https://www.mdpi.com/2504-4494/3/1/14#supplementary
article xml file uploaded 31 January 2019 04:11 CET Update -
article xml uploaded. 31 January 2019 04:11 CET Update https://www.mdpi.com/2504-4494/3/1/14/xml
article pdf uploaded. 31 January 2019 04:11 CET Updated version of record https://www.mdpi.com/2504-4494/3/1/14/pdf
article supplementary file uploaded. 31 January 2019 04:11 CET - https://www.mdpi.com/2504-4494/3/1/14#supplementary
article html file updated 31 January 2019 04:14 CET Original file -
article html file updated 3 April 2019 08:15 CEST Update -
article html file updated 12 April 2019 22:24 CEST Update -
article html file updated 27 April 2019 02:27 CEST Update -
article html file updated 13 October 2019 19:54 CEST Update -
article html file updated 11 February 2020 11:01 CET Update -
article html file updated 18 July 2022 01:09 CEST Update https://www.mdpi.com/2504-4494/3/1/14/html
Back to TopTop