Low-Power Detection of Food Preservatives by a Novel Nanowire-Based Sensor Array

Food preservatives are compounds that are used for the treatment of food to improve the shelf life. In the food industry, it is necessary to monitor all processes for both safety and quality of the product. An electronic nose (or e-nose) is a biomimetic olfactory system that could find numerous industrial applications, including food quality control. Commercial electronic noses are based on sensor arrays composed by a combination of different sensors, which include conductometric metal oxide devices. Metal oxide nanowires are considered among the most promising materials for the fabrication of novel sensing devices, which can enhance the overall performances of e-noses in food applications. The present work reports the fabrication of a novel sensor array based on SnO₂, CuO, and WO₃ nanowires deposited on top of μHPs provided by ams Sensor Solutions Germany GmbH. The array was tested for the discrimination of four typical compounds added to food products or used for their treatment to increase the shelf life: ethanol, acetone, nitrogen dioxide, and ozone. Results are very promising; the sensors array was able to operate for a long time, consuming less than 50 mW for each single sensor, and principal component analysis (PCA) confirmed that the device was able to discriminate between different compounds.