Error in Table
In the original publication [1], there was a mistake in Table 1 as published. Instead of “” this should be “”, and instead of “”, this should be “”. The corrected Table 1 appears below.
Table 1.
Optical fiber and system parameters.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Freitas, A.; Pires, J. Investigating the Impact of Topology and Physical Impairments on the Capacity of an Optical Backbone Network. Photonics 2024, 11, 342. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).