Next Article in Journal
Ultrasonic-Assisted Cutting: A Beneficial Application for Temperature, Torque Reduction, and Cutting Ability Improvement in Deep Drilling of Al-6061
Next Article in Special Issue
Study on Microstructure and Fatigue Damage Mechanism of 6082 Aluminum Alloy T-Type Metal Inert Gas (MIG) Welded Joint
Previous Article in Journal
Effect of Cavity Vacuum Pressure Diminution on Thermal Performance of Triple Vacuum Glazing
Previous Article in Special Issue
Influence of Preheating Temperature on Cold Metal Transfer (CMT) Welding–Brazing of Aluminium Alloy/Galvanized Steel
 
 
Article

Article Versions Notes

Appl. Sci. 2018, 8(10), 1706; https://doi.org/10.3390/app8101706
Action Date Notes Link
article xml file uploaded 20 September 2018 04:20 CEST Original file -
article xml uploaded. 20 September 2018 04:20 CEST Update -
article pdf uploaded. 20 September 2018 04:20 CEST Version of Record https://www.mdpi.com/2076-3417/8/10/1706/pdf-vor
article html file updated 20 September 2018 04:22 CEST Original file -
article xml file uploaded 21 September 2018 06:34 CEST Update -
article xml uploaded. 21 September 2018 06:34 CEST Update https://www.mdpi.com/2076-3417/8/10/1706/xml
article pdf uploaded. 21 September 2018 06:34 CEST Updated version of record https://www.mdpi.com/2076-3417/8/10/1706/pdf
article html file updated 21 September 2018 06:36 CEST Update -
article html file updated 30 October 2018 03:30 CET Update -
article html file updated 30 October 2018 03:30 CET Update -
article html file updated 31 March 2019 20:50 CEST Update -
article html file updated 14 April 2019 23:20 CEST Update -
article html file updated 29 April 2019 03:52 CEST Update -
article html file updated 8 October 2019 02:17 CEST Update -
article html file updated 10 February 2020 11:52 CET Update -
article html file updated 17 July 2022 03:08 CEST Update https://www.mdpi.com/2076-3417/8/10/1706/html
Back to TopTop