Next Article in Journal
Comparative Study of Encapsulation Techniques for Hibiscus Extract: Spray Drying, Co-Crystallization, and Ionic Gelation
Next Article in Special Issue
Optimization of Material and Printing Parameter Selection for FDM 3D-Printed Bone Models for Osteotomy Training: A Biomechanical and User-Based Evaluation
Previous Article in Journal
Effect of the Physical Properties of Testing Gases on the Leak Test Results of Polyethylene Pipe Assemblies Using the Pressure Decay Method
Previous Article in Special Issue
Influence of Different Post-Processing Procedures on the Accuracy of 3D Printed Dental Models Using Vat Polymerization: A Systematic Review
 
 
Article

Article Versions Notes

Appl. Sci. 2026, 16(14), 7220; https://doi.org/10.3390/app16147220
Action Date Notes Link
article html file updated 4 September 2026 08:31 CEST Update https://www.mdpi.com/2076-3417/16/14/7220/html
article html file updated 19 July 2026 10:40 CEST Original file -
article pdf uploaded. 19 July 2026 10:35 CEST Version of Record https://www.mdpi.com/2076-3417/16/14/7220/pdf
article xml uploaded. 19 July 2026 10:35 CEST Update https://www.mdpi.com/2076-3417/16/14/7220/xml
article xml file uploaded 19 July 2026 10:35 CEST Original file -
Back to TopTop