Celik, H.K.; Elham, A.; Cinar, R.; Erbil, M.A.; Entwistle, R.; Rennie, A.E.W.; Akinci, I.
Development of a CAD–FEA Integrated Automation Add-In for DfAM-Aware Topology Optimization: A Case Study on an Additively Manufactured Pusher Duct Support Bracket for a Novel UAV Prototype. Appl. Sci. 2025, 15, 12341.
https://doi.org/10.3390/app152212341
AMA Style
Celik HK, Elham A, Cinar R, Erbil MA, Entwistle R, Rennie AEW, Akinci I.
Development of a CAD–FEA Integrated Automation Add-In for DfAM-Aware Topology Optimization: A Case Study on an Additively Manufactured Pusher Duct Support Bracket for a Novel UAV Prototype. Applied Sciences. 2025; 15(22):12341.
https://doi.org/10.3390/app152212341
Chicago/Turabian Style
Celik, H. Kursat, Ali Elham, Recep Cinar, M. Ali Erbil, Robert Entwistle, Allan E. W. Rennie, and Ibrahim Akinci.
2025. "Development of a CAD–FEA Integrated Automation Add-In for DfAM-Aware Topology Optimization: A Case Study on an Additively Manufactured Pusher Duct Support Bracket for a Novel UAV Prototype" Applied Sciences 15, no. 22: 12341.
https://doi.org/10.3390/app152212341
APA Style
Celik, H. K., Elham, A., Cinar, R., Erbil, M. A., Entwistle, R., Rennie, A. E. W., & Akinci, I.
(2025). Development of a CAD–FEA Integrated Automation Add-In for DfAM-Aware Topology Optimization: A Case Study on an Additively Manufactured Pusher Duct Support Bracket for a Novel UAV Prototype. Applied Sciences, 15(22), 12341.
https://doi.org/10.3390/app152212341
