Simulation Study of the Small-Signal Characteristics of Single-Phase Common-Mode Inductors with Capacitance Cancellation

This article proposes a simulation model of single-phase common-mode inductors to evaluate the small-signal characteristic of common-mode inductors when the stray capacitance cancellation method is applied. From the estimated stray capacitance of common-mode inductors, the value of the cancellation capacitors is determined and implemented into the model. Thus, the proposed model can simulate the small-signal characteristic of common-mode inductors with the capacitance cancellation method at the design stage. To validate the proposed model, a comparison between measured and simulated attenuation characteristics of fabricated single-phase common-mode inductors is performed. The comparison result clarifies that the high-frequency attenuation improvement of the capacitance cancellation method is limited for manganese–zinc ferrite-based common-mode inductors due to the steep change of the complex permeability.