Next Article in Journal
Silver Thread-Based Microfluidic Platform for Detection of Essential Oils Using Impedance Spectroscopy
Previous Article in Journal
Selective Chlorination and Extraction of Valuable Metals from Iron Precipitation Residues
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Applied Sciences
Volume 12
Issue 7
10.3390/app12073591
applsci-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Photopolymerization of Ceramic Resins by Stereolithography Process: A Review

by
Alessandro Bove
,
Flaviana Calignano
*,
Manuela Galati
and
Luca Iuliano
Department of Management and Production Engineering (DIGEP), Integrated Additive Manufacturing Center (IAM), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
*
Author to whom correspondence should be addressed.
Appl. Sci. 2022, 12(7), 3591; https://doi.org/10.3390/app12073591
Submission received: 11 March 2022 / Revised: 28 March 2022 / Accepted: 30 March 2022 / Published: 1 April 2022
(This article belongs to the Topic Additive Manufacturing)
Browse Figures
Versions Notes

Abstract

Stereolithography is known as one of the best Additive Manufacturing technologies in terms of geometrical and dimensional precision for polymeric materials. In recent years, a lot of studies have shown that the creation of ceramic resins, through a particular combination of monomeric components and ceramic powders, allows to obtain complex shape geometries thanks to the photopolymerization process. This review highlights the characteristics and properties of ceramic resins, peculiarities of the ceramic stereolithography processes, up to the relationship between the composition of the ceramic resin and the complexity of the post-processing phases. The comparison of different studies allows outlining the most common steps for the production of ceramic resins, as well as the physical and chemical compatibility of the different compounds that must be studied for the good feasibility of the process.
Keywords: stereolithography; 3D printing; ceramic resin; additive manufacturing stereolithography; 3D printing; ceramic resin; additive manufacturing

Share and Cite

MDPI and ACS Style

Bove, A.; Calignano, F.; Galati, M.; Iuliano, L. Photopolymerization of Ceramic Resins by Stereolithography Process: A Review. Appl. Sci. 2022, 12, 3591. https://doi.org/10.3390/app12073591

AMA Style

Bove A, Calignano F, Galati M, Iuliano L. Photopolymerization of Ceramic Resins by Stereolithography Process: A Review. Applied Sciences. 2022; 12(7):3591. https://doi.org/10.3390/app12073591

Chicago/Turabian Style

Bove, Alessandro, Flaviana Calignano, Manuela Galati, and Luca Iuliano. 2022. "Photopolymerization of Ceramic Resins by Stereolithography Process: A Review" Applied Sciences 12, no. 7: 3591. https://doi.org/10.3390/app12073591

APA Style

Bove, A., Calignano, F., Galati, M., & Iuliano, L. (2022). Photopolymerization of Ceramic Resins by Stereolithography Process: A Review. Applied Sciences, 12(7), 3591. https://doi.org/10.3390/app12073591

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop