Next Article in Journal
Preparation of Microfibrillated Cellulose from Wood Pulp through Carbamate Modification and Colloid Milling
Next Article in Special Issue
Region-Based CNN Method with Deformable Modules for Visually Classifying Concrete Cracks
Previous Article in Journal
A Prospective Study on Accuracy of Computer-Based Fully Guided Versus Pilot-Guided Implant Surgery
Previous Article in Special Issue
Basic Chemical Tests of Concrete during the Assessment of Structure Suitability—Discussion on Selected Industrial Structures
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Experimental Study of Gypsum-Concrete Dense-Column Composite Boards with External Thermal Insulation Systems

1
School of Civil Engineering and Architecture, Henan University, Kaifeng 475004, China
2
College of Water Conservancy & Environmental Engineering, Zhengzhou University, Zhengzhou 450001, China
3
School of Civil Engineering, Tianjin University, Tianjin 300072, China
*
Authors to whom correspondence should be addressed.
Appl. Sci. 2020, 10(6), 1976; https://doi.org/10.3390/app10061976
Submission received: 13 February 2020 / Revised: 7 March 2020 / Accepted: 9 March 2020 / Published: 13 March 2020
(This article belongs to the Special Issue Health Structure Monitoring for Concrete Materials, Volume II)

Abstract

In this paper, a new kind of gypsum-concrete dense-column thermal insulation composite board was developed, with seismic tests conducted on three specimens under quasi-static loading conditions. The fracture feature, hysteresis behavior, material strain, load-bearing and deforming capacity, and energy-dissipating capacity of the composite board were analyzed. The results indicated that this composite board has a favorable energy-dissipating capacity, i.e., relatively high seismic performance. By comparing with the experimental results of composite boards without thermal insulation systems, the influence regularity of thermal insulation system on the deformation behavior of composite board was investigated. The comparison result indicated that with a thermal insulation system, the bearing capacity and ductility of composite board are obviously increased, implying that the thermal insulation system is beneficial for the seismic performance of composite boards.
Keywords: gypsum; seismic test; dense column; external thermal insulation; hysteresis loop gypsum; seismic test; dense column; external thermal insulation; hysteresis loop

Share and Cite

MDPI and ACS Style

Ma, S.; Bao, P.; Jiang, N. Experimental Study of Gypsum-Concrete Dense-Column Composite Boards with External Thermal Insulation Systems. Appl. Sci. 2020, 10, 1976. https://doi.org/10.3390/app10061976

AMA Style

Ma S, Bao P, Jiang N. Experimental Study of Gypsum-Concrete Dense-Column Composite Boards with External Thermal Insulation Systems. Applied Sciences. 2020; 10(6):1976. https://doi.org/10.3390/app10061976

Chicago/Turabian Style

Ma, Shaochun, Peng Bao, and Nan Jiang. 2020. "Experimental Study of Gypsum-Concrete Dense-Column Composite Boards with External Thermal Insulation Systems" Applied Sciences 10, no. 6: 1976. https://doi.org/10.3390/app10061976

APA Style

Ma, S., Bao, P., & Jiang, N. (2020). Experimental Study of Gypsum-Concrete Dense-Column Composite Boards with External Thermal Insulation Systems. Applied Sciences, 10(6), 1976. https://doi.org/10.3390/app10061976

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop