Next Article in Journal
An Intelligent Method for Bearing Pad Flatness Inspection Based on UAV-Enabled 3D Reconstruction
Previous Article in Journal
Occupant-Centred Acoustic Assessment of Teachers’ Responses to Sound Sources in a Secondary School
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Buildings
Volume 16
Issue 14
10.3390/buildings16142893
buildings-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
Correction to Buildings 2025, 15(13), 2375.
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Chao et al. Towards Selecting an Optimal Bonding Test Method for Rebar–Concrete: Comparison Between Pull-Out Test and Full-Beam Test. Buildings 2025, 15, 2375

by
Sisi Chao
1,2,*,
Chenghua Li
1,
Jiahong Dong
1 and
Ziliang Lu
1
1
School of Architecture Engineering, Xi’an Technological University, No. 2 Xuefuzhonglu Road, Weiyang District, Xi’an 710021, China
2
Xi’an Key Laboratory of Urban Low-Carbon Construction, Chang’an University, Xi’an 710061, China
*
Author to whom correspondence should be addressed.
Buildings 2026, 16(14), 2893; https://doi.org/10.3390/buildings16142893
Submission received: 16 June 2026 / Accepted: 16 June 2026 / Published: 21 July 2026
Versions Notes
In the original publication [1], the funder CHD, Open Fund of Xi’an Key Laboratory of Urban Low-Carbon Construction of No. 300102284501 to Sisi Chao was not included. The Corrected Funding Statement appears below:
  • Funding: The research described in this paper was financially supported by the Natural Science Basic Research Program of Shaanxi (No. 2023-JC-QN-0479), Fundamental Research Funds for the Central Universities (No. 300102284501), the project of Shaanxi Outstanding Youth Science Foundation (2023-JC-JQ-47), the project of Shaanxi International Science and Technology Cooperation Program Project (2024GH-ZDXM-18), the project of Shaanxi University Youth Innovation Team Program (2023) and CHD, Open Fund of Xi’an Key Laboratory of Urban Low-Carbon Construction (300102284501).
In the published publication, there was an error regarding the affiliations for Sisi Chao. In addition to affiliation 1, the updated affiliations should include: Xi’an Key Laboratory of Urban Low-Carbon Construction, Chang’an University, Xi’an 710061, China.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Chao, S.; Li, C.; Dong, J.; Lu, Z. Towards Selecting an Optimal Bonding Test Method for Rebar–Concrete: Comparison Between Pull-Out Test and Full-Beam Test. Buildings 2025, 15, 2375. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Chao, S.; Li, C.; Dong, J.; Lu, Z. Correction: Chao et al. Towards Selecting an Optimal Bonding Test Method for Rebar–Concrete: Comparison Between Pull-Out Test and Full-Beam Test. Buildings 2025, 15, 2375. Buildings 2026, 16, 2893. https://doi.org/10.3390/buildings16142893

AMA Style

Chao S, Li C, Dong J, Lu Z. Correction: Chao et al. Towards Selecting an Optimal Bonding Test Method for Rebar–Concrete: Comparison Between Pull-Out Test and Full-Beam Test. Buildings 2025, 15, 2375. Buildings. 2026; 16(14):2893. https://doi.org/10.3390/buildings16142893

Chicago/Turabian Style

Chao, Sisi, Chenghua Li, Jiahong Dong, and Ziliang Lu. 2026. "Correction: Chao et al. Towards Selecting an Optimal Bonding Test Method for Rebar–Concrete: Comparison Between Pull-Out Test and Full-Beam Test. Buildings 2025, 15, 2375" Buildings 16, no. 14: 2893. https://doi.org/10.3390/buildings16142893

APA Style

Chao, S., Li, C., Dong, J., & Lu, Z. (2026). Correction: Chao et al. Towards Selecting an Optimal Bonding Test Method for Rebar–Concrete: Comparison Between Pull-Out Test and Full-Beam Test. Buildings 2025, 15, 2375. Buildings, 16(14), 2893. https://doi.org/10.3390/buildings16142893

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop