Next Article in Journal
Timber Semirigid Frame Connection with Improved Deformation Capacity and Ductility
Next Article in Special Issue
Refurbishing Classrooms for Hybrid Learning: Balancing between Infrastructure and Technology Improvements
Previous Article in Journal
Model-Based Control Strategies to Enhance Energy Flexibility in Electrically Heated School Buildings
Previous Article in Special Issue
Preferences for Hotels with Biophilic Design Attributes in the Post-COVID-19 Era
 
 
Retraction published on 6 September 2024, see Buildings 2024, 14(9), 2806.
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

RETRACTED: A Review on Building Design as a Biomedical System for Preventing COVID-19 Pandemic

1
Department of Civil Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University, Alkharj 11942, Saudi Arabia
2
Department of Civil Engineering, Faculty of Engineering and I.T., Amran University, Amran 9677, Yemen
3
Department of Civil Engineering Technology, Faculty of Industrial Technology, Phranakhon Rajabhat University, Bangkhen, Bangkok 10220, Thailand
4
Polytechnic Institute, Far Eastern Federal University, 690922 Vladivostok, Russia
5
Peter the Great St. Petersburg Polytechnic University, 195251 St. Petersburg, Russia
6
Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS, Perak Seri Iskandar 32610, Malaysia
7
Civil Engineering Department, Faculty of Engineering, Jazan University, Jazan 88723, Saudi Arabia
8
Civil Engineering Department, Faculty of Engineering, University of Science and Technology, Aden 9672, Yemen
*
Author to whom correspondence should be addressed.
Buildings 2022, 12(5), 582; https://doi.org/10.3390/buildings12050582
Submission received: 6 February 2022 / Revised: 8 April 2022 / Accepted: 11 April 2022 / Published: 30 April 2022 / Retracted: 6 September 2024
(This article belongs to the Special Issue Post-COVID Architecture Research)

Abstract

:
Sustainable design methods aim to obtain architectural solutions that assure the coexistence and welfare of human beings, inorganic structures, and living things that constitute ecosystems. The novel coronavirus emergence, inadequate vaccines against the present severe acute respiratory syndrome-coronavirus-(SARS-CoV-2), and increases in microbial resistance have made it essential to review the preventative approaches used during pre-antibiotic periods. Apart from low carbon emissions and energy, sustainable architecture for facilities, building designs, and digital modeling should incorporate design approaches to confront the impacts of communicable infections. This review aims to determine how architectural design can protect people and employees from harm; it models viewpoints to highlight the architects’ roles in combating coronavirus disease 2019 (COVID-19) and designing guidelines as a biomedical system for policymakers. The goals include exploring the hospital architecture evolution and the connection between architectural space and communicable infections and recommending design and digital modeling strategies to improve infection prevention and controls. Based on a wide-ranging literature review, it was found that design methods have often played important roles in the prevention and control of infectious diseases and could be a solution for combating the wide spread of the novel coronavirus or coronavirus variants or delta.

Table of Contents

1. Introduction 2
2. Hospital Architecture Evolution Overview 5
3. Infection Transmission Methods 7
3.1. Droplet and Airborne Transmission 7
3.2. Waterborne Transmissions 7
3.3. Surface or Contract Transmission 8
4. COVID-19 Transmission and the Built Environment 8
5. Suitable Design Methods for Infection Prevention and Control 10
5.1. Designs of Social Distancing and Improving Natural Ventilation 10
5.2. Design to Improve Daylight or Ventilation 14
5.3. Designs with Adaptive Construction Methods and Finishing Materials 15
5.4. Flexible Designs with Sustainability Characteristics 17
5.5. Urban Design and Transportation 17
6. Controls, Mitigations, and Health Care Setting Special consideration 19
7. Architectural and Design Engineering for the Controls in Post-Pandemic 20
7.1. Future Human-Centered Design 21
7.2. In Post-COVID-19 Architectural Design: An Auxiliary Decision-Making Strategy 22
8. Proposed Roles by Real Estate to Mitigate Transmission of COVID-19 22
8.1. Purification of Indoor Air and Accentuation of Ventilation of Buildings 22
8.2. Airborne Dissemination 23
8.3. Preserving Optimal Humidity and Emphasizing Cleaning Protocols 23
9. Conclusions 24

1. Introduction

The present COVID-19 epidemic—without a doubt—has changed our viewpoints regarding hospital architectural design, planning, and digital modelling as a biomedical system to prevent the spread of harmful pathogens such as the coronavirus disease 2019 (COVID-19) pandemic. The response to these diseases included searching for the necessary vaccinations by conducting examinations and diagnostics to achieve personal safety. However, the basic approaches applied to managing the pandemic and preventing its spread include modifications to individual behaviors to comply with proposed safety requirements, including the collective isolation of infected people [1]. According to recent studies and the author’s opinions, there is little research on the use of buildings to prevent epidemics and viruses.
However, there is an urgent need to change the built environment (B.E.) and innovate specific solutions for the development of rural and urban areas with sustainable and healthy buildings [2]. Therefore, adequate research needs to be conducted regarding the role that buildings and infrastructure can play in mitigating the spread of the epidemic (COVID-19) in residential areas.
Historically, the spread of infectious diseases has been mitigated by developing new solutions in B.E. as one of the methods for preventing the spread of contagious diseases, meaning that B.E. plays an essential role in helping to reduce the risks of the spread of infectious diseases [3]. There are highly reliable precautions that can contribute to mitigating the outbreak of COVID-19, which range from changing the surge to changing structures. Increment alteration includes either lifting physical barriers or the organization of the space. However, structural alteration encompasses changing parts of the buildings, such as doors, windows, or balconies. Therefore, the spread of COVID-19 can be mitigated by altering the B.E. by changing the building materials that can trap the virus and stop the spread or by redesigning the buildings to minimize the viral spread.
Consequently, the COVID-19 pandemic is challenging the researcher to rethink the construction of the structures [4]. However, there is a need to study the specific configurations of the building materials and designs. In addition, it is reported that previous research focused on the effects of pandemic of COVID-19 on municipalities was primarily associated with four key themes, as illustrated in Figure 1 [5]. Sustainable architecture is expressed in the materials, construction processes, resource use, and overall design of a structure. The design must also allow for sustainable operation throughout the building’s life cycle, including eventual removal. While it must be useful and visually pleasing, the space must also be built with the goal of ensuring long-term energy and resource efficiency. It challenges architects to create smart designs and use existing technologies to ensure that structures have the least amount of negative impact on the ecology and communities.
Sustainable architectures are integrating the inhabitants into natural environments and micro-environment controls and adopting efficient material resources and energy in buildings. Sustainable designs aim to foster the coexistence and welfare of human beings, inorganic elements, and living things that make up the ecosystem and find architectural responses [6,7,8]. An integral portion of infection inhibition and management mechanisms should be the hospital’s architectural design process. Apart from low carbon emissions and low energy, Van-Khai [9] supported the idea that the sustainable architecture purpose for health facility designs should incorporate design methods for the prevention and control of communicable infections. The World Health Organization (WHO) emphasizes that combating infectious diseases and protecting population centers from their spread is a scientific strategy, based on well-studied solutions aimed at preventing the health risks and harms caused by the infection of people and health workers [10]. Given the quick and ongoing changes in the healthcare environment in the context of advances in medicine, innovation, and strategic culture, this requires a strategy to operate the facilities throughout their lifespan [11]. It is also reported that the architectural designs of the hospitals took a significant share of the pandemic in the Tugela Ferry outbreak in South Africa in 2006, which showed the importance of facility design to expand hospitalization [12]. Hospitals must be built and designed using strong human-factor concepts; they must also be able to adapt to emerging problems and urgent demands, as well as accommodate future requirements, particularly when dealing with emergency situations such as COVID-19 [13,14,15,16]. The implications are that the well-being and health of humans are strongly linked with constructed environments. Based on the current reports from the disease control center regarding the Coronavirus transmission mode, it has become essential to balance the need for control measures and the open-access design concept to reduce the infection rates [17]. Modular and quick building, repurposing of places, and temporary setting equipment have all evolved as ways to address the pressing demand for adaptable and robust solutions [18,19]. Recent and past research has indicated that unstable climates and climate change play essential roles in driving global emergence, resurgence, and redistributions of communicable infections [20,21]. In addition to that, the climate’s continuous change has a significant impact on the constructed environments [22,23]. Today’s healthcare infrastructures are developed and built with the idea in mind that they should be important for a long lifetime, which does not allow for changes in service need on a regular basis [24].
The impact of buildings’ indoor environmental quality (IAQ) on residents’ health is an important topic in civil, architectural, mechanical engineering, and public health. The concept that air pollution can raise human exposure to viral infections such as SARS-CoV-2 is currently supported by recent data [25]. In previous studies, IAQ indicators were included in the suitability of ambient temperature, visual visibility, acoustic properties, humidity, and ventilation on the health of the inhabitants. It is believed that the impact of the IAQ on the health of the population is closely related to the factors and characteristics of the built environment [26,27]. The accumulation of indoor air fluid in buildings has exacerbated the phenomenon of sick building syndrome. Therefore, many believe that people living in areas with a green and healthy environment would have better health [28,29]. The linked relationship between environmental health, the projected results, and the consequences are depicted in Figure 2. As indicated in Figure 2 [27], several methodologies collaborate to produce a shared outcome regarding the health of the occupants [27].
Professionals of all credentials should work together to study the COVID-19 epidemic in the search for extensive behavioral change, more ventilators, and personal protective equipment (PPE) [30,31,32]. In architectural design, flexibility is defined as a building’s adaptation to the changing required specifications and operational solutions throughout short, moderate, and long time periods [33,34]. To enable successful emergency administration [33,35] and adaptability [36], flexibility is a life-threatening factor to be considered throughout the hospital design phase, from the fundamental structural planning of the building to the operational and spatial design of intensive care [37]. There should be a methodology to determine how patients and employees can be made more secure via the viewpoints of architectural design and modeling and from the perspective of highlighting the architects’ roles in combating COVID-19 and designing guidelines as a biomedical system for policymakers. Thus, this research proposes a model to assess the risk management of utilizing buildings to capture harmful pathogens such as COVID-19 by exploring (1) the current safety-risk assessment and health practices, (2) risk management and control, and (3) risk communication.
The tasks include exploring the hospital architecture evolutions and the connection between architectural space and communicable infections and recommending design strategies that could improve infection prevention and control (IPCs). The review is based on the existing literature and on interactions with healthcare workers by interviewing them.
The COVID-19 pandemic has made it the responsibility of officials to prepare plans and implement measures to limit future outbreaks. Part of this responsibility lies with civil engineers, architects, and mechanics. The future outlook for designing buildings to become healthy buildings that limit the spread of epidemics may differ. The fact that people are taking shelter and staying in homes during the pandemic period to prevent the spread of infection is a limitation of usual luxury. The nature of the home experience and the behavior and psyche of people during that period differed due to the construction of the type of houses, the way they were designed, the ventilation, etc. All this necessitated a major rethink in the design of buildings and vital facilities for any possibility of the spread of any type of infectious disease in the future.

2. Hospital Architecture Evolution Overview

Hospital architecture has evolved to fit into the healing process demands from time to time. According to Cameron [38] and Guenther and Vittori [39], there is a long-acknowledged connection between architecture and health. Moreover, the appropriate building relevance in healing processes is well recognized by both architectural and medical practitioners. The social functions dominated hospitals in the early Middle Ages, as opposed to the medical, after the old states fell; the hospitals are associated with low medical-knowledge levels [40]. However, numerous hospitals were launched between the 6th and 8th centuries in Western Europe. During the 12th and 13th centuries, the advanced comprehension of Eastern and classical healers started to infiltrate Europe [41]. In Greece and Egypt, the earliest healthcare chronicles were secured to spiritual doctrines with sanctuaries and priests playing major roles in attempts at identification, analyses, and care of diseases. The majority of the early health facility designs looked like learning institutions structured around courtyards that were usually situated at the edges of cities and villages. The caretakers of patients were monastic orders [41,42]. The Schola Medica Salernitana is a good example of such a building. It was established under the monastic hospital auspices in the 9th century in Italy [38]. It is confirmed that the Schola Medica Salernitana remained the ground-breaking center for training scientists and medical professionals and for the provision of licensed practice in Europe until the 13th century [40].
It is argued that between the 17th and 18th centuries, the contemporary hospital aspects were configured in Europe [43]. Hotel-Dieu is evidence of one such configuration. It is one of the largest and earliest hospitals in the mid-1700s in Paris. The hospital was devalued due to bad conditions attributed to the unsanitary, dim, and poorly aerated building. The hospital wards were regularly situated face-to-face with other wards with contagious people. Thus, commissions were established to direct research and studies to find conclusive solutions for the hospitals and explore architectural designs appropriate for the scenario [42]. The substantial Dr. Tenon works, the confluence of events, and the outcomes of the commissions led to solutions to the problems that are referred to as the “pavilion design/plan”, which was first used in 1854 in the Hospital Lariboisiere [44].
In 1860, the discoveries of germ transmission were another integral factor that revolutionized hospital architecture [43]. This led to the isolations of the sick and infectious in specific pavilions. Louis Pasteur’s works confirmed the need to address the disease and infection transmissions with the sterilization of medical devices and the separation of patients [45]. Isolating pathology philosophy resulted in a real revolution of hospital architecture. Combined with the particular tasks of focusing on healthcare environments, the rise of scientific medicine and the emergence of the pavilion model are the origins of contemporary hospital architecture. Florence Nightingale (1820–1910), born in Florence, Italy, is worthy of mention [42]. Hospital developments were greatly revolutionized through her revolutionary activities in statistics, nursing, and writing [46]. Her Crimean War experiences in 1853 to 1856 set up foundations for hospitals with pavilion models that offered hygiene, lighting, circulation of patients, and ventilation. This further reduced infection rates and improved patient recovery. The multiple-patient ward concept is usually known as the Nightingale ward, and it is still applied in today’s practice [47].
Research on the Florence Nightingale works disclosed that the number of military officers who died in the military hospital in Turkey from nosocomial infections (dysentery, typhus, and cholera) was higher than the numbers of military officers who perished due to injuries sustained in the Crimean War [46]. Death rates were greatly minimized from 42% to less than 3% due to her discovery of the connection between patients’ healing and space/environmental factors. The pandemic experiences of the recent past (COVID-19, TB, and SARS) to a certain level have taught us lessons regarding how architectures can be incorporated into the fights against the wide spread of communicable infections. Therefore, the researcher examines their main transmission modes: surfaces, air, and water. It is reported that certain air samples were taken in a room that was labeled as a COVID-19 ward (Figure 3) [48]. The exhaust air was treated with a triple filter (minimum performance measuring value 14, 75–85% effectiveness for 0.3 µm particles), coil condensing (to eliminate moisture), and ultraviolet light before 90% of the processed air was recycled back into the bedroom (care room) [48].
Therefore, it can be concluded that the systems of hospital architecture design of hospitals, air conditioning, and ventilation have an essential role in preventing the transmission, which has been proven historically.

3. Infection Transmission Methods

The hospital administration found that the hospitals were not structured to deal with the airborne infections in the Tugela Ferry outbreak in 2006 in South Africa. Instead, the hospitals were structured to deal with blood-borne diseases. At the period that XDR-TB appeared in patients, the hospital, as a result, did not have airborne infection control policies [12]. The reports underscore the distinct roles that architect plays in contributing to healthcare deliveries. Therefore, the infection transmission modes should be assessed to comprehend the controls to take in combating contagions from architectural perspectives.

3.1. Droplet and Airborne Transmission

Indoor environments or spaces, such as terminals, hospitals, workplaces, schools, offices, and homes, have potentially dangerous contaminants [49]. As soon as fine microorganisms remain in the atmosphere for a longer time, airborne transmissions take place, spread widely by airflow, and can cause infections when susceptible people inhale the infected airflows [17]. There are growing anxieties that COVID-19 is aerosolized. Coronavirus can debatably remain longer in the atmosphere and be breathed in by vulnerable people, such as with the bacteria that cause tuberculosis [50]. The virus is an obligate and small (20–400 nm) parasite. Because viruses are easily transmitted, particularly in inadequately ventilated and crowded environments and spaces, they are common causes of communicable infections acquired indoors [49,51]. Droplet transmissions occur when a virus travels on a relatively larger respiratory droplet (>10 μm) that individuals exhale, sneeze, or cough when breathing or talking or through chief aerosolizations [49]. It is noted that one sneeze or cough in passages, corridors, or lobbies can emit many droplets (up to more than 38,000 droplets) at a velocity of between 50 miles per hour and 200 miles per hour. Each droplet carries millions of microbial particles [49]. Airborne transports are different from droplet transports. The droplet, after exiting into the air, travels small distances, ranging between 1–2 m before settling on surfaces, while the airborne transport persist in the air for a longer period and travels for a longer distance [52]. Figure 4 shows a diagram of airborne and droplet spread.

3.2. Waterborne Transmissions

Infections associated with water are categorized into four classes: water-related, water-based, water-washed, and water-borne infections [53]. A successful means for increasing contagious proxies to a big population proportion is waterborne transmission. There are various water-associated mechanisms of transmitting communicable infections. It is reported that huge amounts of enteric microbes can be released into the water environments through the discharge of the wastes of infected people (solid or liquid) into exposed watercourses [54]. Secondly, infectious particles from confined-to-bed infected people may play a role in the transmissions of waterborne infections because pathogens in contaminated clothing and bedding may also be released into waterways in the laundry activity course [55].

3.3. Surface or Contract Transmission

Infections can be transferred from individual to individual by indirect or direct contacts [56]. Direct contacts mean individual-to-individual infection spread through physical contacts between infectious agents such as the mucous membranes of the receivers, contaminated gloves and hands, or infected people [17]. Indirect contacts arise when susceptible people are exposed to contaminated objects. Certain microorganisms can live on substances for shorter periods. For instance, COVID-19 can survive on copper surfaces for four hours, on plastic surfaces for three days, and on cardboard surfaces for one day [52]. The implications are that by getting into contact with objects such as door handles and handrails immediately after infected persons one might be exposed to infections [57]. Nevertheless, transmission occurs as one touches one’s eyes, mouth, and nose before washing one’s hands [58]. Figure 5 shows an illustration of the transmission of respiratory infections through contact with surfaces or contacting in indoor environments [59].
Engineers are required to take precautions to reduce the transmission of infection when designing the architecture of hospitals. This is done by categorizing and distributing areas according to the possibilities of the transmission of infection, the need for treatment, ease of access, allocation of corridors, separation of disease cases, allocation of independent ventilation and air conditioning systems, etc.

4. COVID-19 Transmission and the Built Environment

Most people spend 90% of their daily lives within built environments. The built environment serves as a possible transmission vector for the COVID-19 spread via viral exchange and air transfer by containing fomites (materials and objects that are likely to carry communicable infections) and inducing close interactions among humans. In the buildings, the dweller density influenced by indoor activities, building types and programs, and occupancy schedule facilitates the accruals of human-related microbes and pathogens. Pathogen and microbial elements may be directly dropped and re-suspended because of mechanical and natural airflow arrays or other turbulence sources in the indoor environments, such as a thermal plume from warm human body, footfall, and walking. Then, these re-suspended pathogen elements can redeposit back onto the fomite. Evidence shows that SARS-CoV-2 particles from the infected people can contaminate fomites through the settling of large droplets and aerosolized viral particles spread through vomiting, coughing, sneezing and talking, bodily secretions, and contact with contaminated hands.
In the literature, it is reported that the SARS-CoV-2 particles can possibly remain and live on a fomite for a period varying from a few hours to five days, depending on the materials [60]. The coronavirus seems to survive for the shortest period in aerosol forms (with 2.74-h half-life) and for the longest at a relative humidity (RH) of forty percent on plastic materials (with a 15.9-h half-life). Nevertheless, the aerosol survivals were established at 65% relative humidity. The survival of COVID-19 particles at a RH of 40% on steel (with a 13.1-h half-life), copper (with a 3.4-h half-life), and cardboard (with an 8.45-h half-life) all fall between survival on plastics and in the air [50]. Nevertheless, it is worth noting that there are no recognized circumstances so far of coronavirus infections coming from fomites. Precautions need still to be taken to disinfect and clean all possible COVID-19 virus sources even though COVID-19 transmissions have been recognized only via widespread respiratory droplets and not via depositions on fomites [53]. The discovery of SARS-CoV-2 virus RNA has also been reported in the hospital exterior environs of three specialist hospitals devoted to COVID-19 therapies [61]. SARS-CoV-2 was found in all complex compartments in the clinical departments treating suspected or confirmed COVID-19 patients (soils and aerosols) and the wastewater treatment sector (soils, waters, and aerosols) (Figure 6), indicating that they are high-risk sites for possible SARS-CoV-2 infection [61].
It is reported that receiving an asymptomatic COVID-19 patient exposes high-risk locations outside patient rooms to respiratory secretions harboring SARS-CoV-2 [62]. Conversely, unsterilized medical wastewater in the wastewater treatment sector’s adjusting tank may spill aerial viruses by aeration or uplifting, depositing SARS-CoV-2 on neighboring solid surfaces and soils [61]. Traditional outdoor disinfecting strategies mainly target facilities, roads, or walls and can adequately destroy infections on flat objects [63], justifying the negative consequences on all wall surfaces and roads in this reported study. The existence and persistence of viruses in soils are rarely studied, and there is little research highlighting the potential risks of soil infections [64]. Soils can absorb viruses from aerosols and water, possibly becoming a major contributor of SARS-CoV-2 spread in the exterior environs. Non-point exterior SARS-CoV-2 overflow from single dwellings of asymptomatic COVID-19 patients, as well as ambient viral leftovers in densely populated areas, require more attention and additional exploration [61].
Spread through aerosolizations remains a possible secondary transmission method, based upon previous SARS studies, particularly within the built environments [42]. Viral transmission mitigation through the air delivery systems of built environments usually depends on inline filtration media. The majority of commercial and residential houses use MERV-5 to MERV-11 (minimum efficiency reporting values of 5.0 to 11.0). High-Efficiency Particulate Air (HEPA) filters and MERV-12 are utilized in critical health care settings [54]. The MERV-13 filter has the potential to remove microorganisms and other elements varying from 0.3 to 10.0 µm. Most viruses vary from 0.004 to 1.0 micron, including CoVs. In coagulated aerosols, some viruses have been observed at less than one micron in size, facilitating a more successful filtration mechanism to minimize transmission potentials against pathogens such as COVID-19. Furthermore, no filter systems are ideal [54]. Hospital investigations have identified gaps in the filter edges to be contributing factors in filtering system failures to remove pathogens from the shared air environments. It can be concluded that urban planning for the built environment directly impacts the transmission of infection through activities and events, participation, and the use of facilities among residents. Therefore, the future of urban planning requires methods that consider the outbreak of airborne infectious diseases.

5. Suitable Design Methods for Infection Prevention and Control

Architectural spaces can help or foster the inhibition of communicable infections when they are conceptualized and developed with clear goals [47]. Florence Nightingale first experimented with this when she introduced the medical ward models and stated that cross ventilation and natural daylight are important elements for disinfecting and minimizing the infection occurrences in the hospitals [47]. In adapting the hospital, residential, commercial, and domestic spaces for infection preventions and controls, the following are some design approaches to use.

5.1. Designs for Social Distancing and Improving Natural Ventilation

To maintain a social distance of at least one meter apart, the architects should provide enough spacing in entrance lobbies, stairs, hallways, corridors, and waiting bays. This will create safe distancing as well as minimize contact transmission because current studies reveal that before settling on the surface, aerosol droplets move only the short distance of one to two meters [51]. By eliminating nooks with ledge benches, corridors need to be designed to discourage unofficial conversations [46]. Ledge corridor designs were also introduced earlier to the hospital designs to facilitate interactions among employees [65]. For example, Huoshenshan Hospital has designed a more secure design concept of “three four and zones corridors”, based on local characteristics, including the clean zone, the medical office zone, and the ward zone (Figure 7) [66]. Clean corridors, nurse corridors, medical corridors, and patient corridors were the four types of hallways. They were all part of the hospital’s basic nursing venues. The architects should avoid double-bank corridors, closed-end lobbies and waiting bays, and other spaces designed with no or little airflows. It has become necessary that the design considerations of lobbies and corridors should be appraised to house beds, trolleys, crouches, and wheelchairs and ensure safe distancing as needed by the CDC. The 1.5 m corridor width of the UK Health Department [47,67] is not adequate with regard to safe distancing within hospitals spaces. A minimum of a 2.5 m width for a corridor is therefore recommended [68]. This is to permit 0.3 m as a bilateral freeboard and 1 m minimum intervals in social distancing because human movements are not exactly in straight lines.
Ventilations are considered as air movements within spaces, usually shaped by variances in air pressure. In mitigating nosocomial and other communicable infections, ventilations are very critical. Recent research has indicated that suitable ventilation rates can efficiently reduce the cross-infection risks of airborne infection in public spaces and hospitals [60,69,70,71,72]. Natural ventilation can offer higher ventilation rates in an energy-efficient manner than forced ventilation by powered fan or mechanical ventilation. In Chinese hospitals, studies of isolation wards disclosed that wards with a higher proportion of natural ventilation or air spaces were found to the best in the prevention of the SARS plagues among health practitioners as compared to other available designs [71]. Twelve ACH is the CDC ventilation rate requirement in ACH. The implications are that the infection risks would be greatly minimized when the ventilation rate (ACHs—Air Changes per Hour) increased.
Carbon dioxide tracer-gas techniques were also adopted in analyzing the room pre-and post-adjustment situations in another study [60]. The goal was to explore the changes in tuberculosis transmission risks in waiting and consulting rooms. In approximating the TB transmission risks for healthcare workers and patients, the results showed a mean decrease of 72% (interquartile range of 51–82%). Therefore, normal ventilation can be a solution for combating the wide spread of communicable infections such as coronavirus in public spaces such as offices, schools, and hospitals. Pressurization, filtration, dilution, nanotechnology, and purification (see Table 1) are the greatest technical interferences.
In buildings such as hospitals, adequate cross-ventilation is essential. It is reported that the corridors need to have an open end to ensure suitable ventilation rates [68], with a minimum width of 2450 mm (Figure 8) [73]. Hallways or corridors with closed ends need to be avoided as much as possible. Ventilation louvers functionally provide air ventilation. They should be provided on the doorstops to minimize hot air circulation due to the doorstops seemingly behaving like a temporary cut-off of the hot air barrier system that provides a continuous barrier to the movement of air through enclosures. Upper ventilation windows should be provided on the dividing walls in the hallways to lessen hot air circulation.
The architects should incorporate the courtyard designs to create an integrated ventilation channel, carry out overall designs on building structure layers or open spaces, utilize the courtyard spaces as the environmental interchange spaces, and establish cohesive ventilation passages to allow the hospital building ventilation [68]. The courtyards and open-end corridors (the design approaches) increase ACH—air change per hour (ventilation rates), thus minimizing the infection risks greatly (See Figure 9) [74]. The figure showed that a hose type of airflow has the ability to disperse COVID-19-infected droplets far inside densely populated areas. Approved mechanical ventilation and a hybrid strategy (mixed-mode method) need to be integrated when the natural ventilation is not adequate. Nevertheless, there is no evidence that mechanical ventilation has helped with widespread contagion in buildings, even though a broad series of microorganisms is argued to have gotten in vent outlets [60].
Table 1. Purification systems and air disinfection methods.
Table 1. Purification systems and air disinfection methods.
CategoryMethodExplanationAdvantages and DisadvantagesRefs.
DilutionNatural, Mechanical,
and mixed
It is the simplest way to remove air pollutants and infections. It removes particles through ventilation, in addition to ventilation solutions contributing to improving IAQ, saving energy.It has to do with air distribution patterns, the placement of the ventilation inflow and outflow, the physical layout of the space, and the thermal comfort of the residents, among other things.[75,76]
PressurizationPositive and NegativeDifferential pressurization is the process of creating directional airflow between adjacent places by measuring differences in air pressure.To reap the benefits, it necessitates meticulous calculations and simulations, as well as close monitoring. It can be used on its own or in combination with other methods.[75]
FiltrationMechanical filtrationHEPA filters are used in specific areas or as antimicrobial agent filters, commonly used in ventilation and air conditioning (HVAC) systems to improve air quality.It necessitates proper setup, upkeep, and monitoring. The coronavirus is tiny enough to pass past most filters due to its small size. HEPA filters, on the other hand, collect larger particulates that contain it.[75,77]
Biofiltration technologyA plant-based technology that filters the air by absorbing CO2, SO2, and NO2. The most typical applications are the green wall and algal structure.More research needs to be conducted, particularly on the maintenance and infrastructure requirements.[78,79]
Nano-technologyPhotocatalytic oxidation (PCO)Nanomaterial-based coatings for antibacterial applications have been presented in recent studies. TiO2 is the most frequent photocatalyst.Still being researched is how to evade nanoparticles having a negative impact on human health and the environment.[80,81]
Silver
nanoparticles
The viability of pathogens is controlled using silver nanoparticles in this method.It is a practical method, but it still needs more research to see whether it has any negative health impacts.[82]
PurificationUltraviolet germicidal irradiation (UVGI)
Technology
This method is based on UVGI’s capacity to destroy pathogen RNA/DNA and render them harmless.It is still being developed in order to avoid negative health impacts on human skin and eyes.[83,84]
Bipolar
Ionization
High-voltage electrodes in the air create reactive ions that react with airborne pollutants, including viruses, and are integrated into HVAC.Although it improves the filtering system, it has the potential to release ozone, and more scientific research is needed.[77,85]

5.2. Design to Improve Daylight or Ventilation

There is no evidence that the spread of airborne viral infections can be controlled by sunlight and good ventilation (see Figure 10a,b) [86]. Importantly, sunlight and ventilation were thought to be essential safety measures against communicable infections before the arrival of antibiotics [87]. It is argued that bacteria bacillus may be killed in a few hours or minutes by sunlight via glass subject to bacteria-layer thickness exposure [88]. Besides, the daylight diffused adjacent to the windows of the buildings can denature the bacteria in a period ranging from 5 to 7 days. Previous research states that daylight can denature bacteria such as tuberculosis and anthrax [89]. More current research by Strong [90] reported that over two glass layers from a north window, diffused daylight or sunlight was found to be successful in denaturing hemolytic streptococci within two weeks without using any antibiotic. The same strains survive in the dark for more than twenty-eight weeks at room temperature.
The best germicidal factor is sunlight, which can prevent infections [17]. It is reported that solar radiation (or more particularly, ultraviolet light) acts as the chief natural virucide in the environment [91]. The germicidal effectiveness of ultraviolet C (UVC) peaks and UV indices are the standards for quantifying the sunlight or daylight at about 260–265 nm [92,93]. It is worth noting that ultraviolet C is the commonly applied and most effective ultraviolet germicidal irradiation (UVGI) [94]. Unfortunately, only a small quantity of UVGI reaches the surface of the Earth as the ozone layer absorbs much of it [95]. It therefore follows that there should be enough windows that will enable sunlight into stairwells, office corridors, rooms, and hospital wards as part of infection prevention and control. Designing houses with the best exposures to outdoor air and daylight can prevent the survival and transmission of infection sources, with subsequent health gains for the occupants.

5.3. Designs with Adaptive Construction Methods and Finishing Materials

Current research on COVID-19 argues that the pathogen has a diverse life span with various physical surfaces and behaves differently. Another study indicated that in comparison to spongy fabrics such as cardboard, cotton, and leather, where the virus cannot survive more than one day, the virus is stable on steel and plastic materials, where it can survive up to three days [52]. On the copper surfaces, the same virus strain only survives for four hours. Therefore, builders should rethink surface treatments, material specification writings, and the selection processes of materials. Earlier research by Nightingale [87] disclosed that the plasters utilized in construction that have many small voids were thought to be spreading and breeding zones of pathogenic particles. The research recommended the following based on the above findings:
Architects should use plated or copper-infused materials for regularly touched surfaces, such as bed rails, balcony rails, and staircase handrails.
The architects should design and place sinks to inhibit waste spillages in sensitive care places and to improve cleaning ease.
Plaster with de-coagulant mixtures with high smoothness and solidity or cement screed should be used. After plastering by cement mortar to eliminate tiny void and improve smoothness on the wall surfaces, architects should use POP screeds or cover materials such as special paints. The use of fine sand with textured paints should not be encouraged.
Entry curtains and doors to public spaces and hospitals with high traffic should be fitted with sensors to improve automatic closing and opening. This will greatly minimize contacts with the doorknobs and therefore prevent transmissions.
Several entries into public areas need to be reduced to enable successful monitoring in compliance with CDC guidelines. Moreover, sinks with motion sensors should be integrated to eradicate particular transmission possibilities.
Controls and equipment need to have small numbers of flat surfaces on which elements can settle, with few crannies and crevices in which debris can accumulate; minimizing the number of horizontal surfaces such as ledges can assist in decreasing the infection spread.
Nowadays, the buildings are strong in the UK. The US, Australia, and China use a variety of strategies to reach healthier architecture [96]. Healthy buildings must have the latest technology that exists to promote fresh airflow and, thus, minimize the COVID-19 viral spread [97]. Ergonomic furnishings, adjustable shade, daylighting, natural views, greenscaping, and improved indoor air quality are the most popular healthy architecture concepts [98]. The use of healthy building design principles has become essential for long-term growth. Some of the methods are being used in household, public, and residential and commercial buildings in order to boost fresh intake air and natural ventilation systems [99]. Furthermore, contact with infectious material has been linked to the transmission of greater than 80% of contagious diseases [100]. It is reported that the modular building concept has proven effective in delivering structures for these types of epidemics or environmental catastrophes, while allowing for lower costs and more efficient construction [101]. Therefore, it is critical to consider innovative adaptive reuse strategies to overcome such a predicament [102]. This can be accomplished with a variety of methods, including designing restrictions and adapting existing structures, as well as enhancing indoor air quality [103]. This is likely to significantly alter the character of infrastructures and design now and in the future in dealing with infectious diseases [104]. As a result, the building manufacturers are working on engineering control to correct and remodel structures in order to provide a healthy constructed environment (Figure 11) [102].

5.4. Flexible Designs with Sustainability Characteristics

Architects should design sufficient and well-organized workspaces to conduct treatment-associated activities [60]. The designs should be flexible but not rigid. They need to be flexible enough to react to the latest regulations from healthcare regulators and healthcare equipment providers/producers and to align with the shifting hospital demand. It is worth noting that the existence of windows and doors is not a guarantee that they shall be regularly applied to improve air movements because, during uncomplimentary climatic circumstances, hospitals cannot keep windows and doors open [105,106]. Therefore, flexible designs need to address new challenges such as the coronavirus epidemic and adapt to changes.
The novel coronavirus emergence, the widespread emergence of other new viruses, and the upsurge in viral resistance have made it essential to review the preventative approaches used during the pre-antibiotic time [107]. As bioterrorism presently poses extra possible threats to public health indoors, it is even more urgent [108,109]. Furthermore, the modern architectural practices of designing hospitals and hospitals and buildings for aesthetics and comforts favor pathogen persistence [93].

5.5. Urban Design and Transportation

The characteristics of different urban designs and shapes can affect pandemic dynamics. The preliminary study initially focused on concerns about density, leaving other potential factors unexplored [5]. The COVID-19 epidemic has raised many ideas about the implementation of the comprehensive ban and the importance of developing it to reduce infection. Densely populated and well-connected places are believed to be hotspots for the rapid spread of an epidemic due to the large amounts of common human activities. On the other hand, the evidence is still somewhat contradictory for a strong relationship linking the severity of infection outbreaks with human density after analysis of over 900 US urban counties [110]. Remarkably, some densely populated areas have marginally lower rates of virus-related deaths than large and less densely populated areas. In the Netherlands, there is also no positive, statistical relationship between district density and infection rate, even though the country is highly urbanized and densely populated [111]. It has been revealed that the rate of people coming from the city of Wuhan in China and the density of the population areas are critical factors that can contribute to the knowledge of the spread rates of COVID-19 [112]. Controlling for the first variable led to the disappearance of the linear relationship between infection prevalence and population density. In addition, no significant prevalence of the virus COVID-19 was found in high-density urban areas [5].
However, according to other studies, a relationship was discovered between virus density and virus spread. The effects of some social, economic, and environmental variables on the epidemic prevalence rates in China were investigated in the early periods (the first time period from 19 January to 1 February and the second time period from 2 February to 29 February) [113]. In the first stage of the epidemic, there was no direct relationship between the rate of spread of the COVID-19 virus and population density; on the other hand, based on the results presented, in the second stage there was a significant relationship between them [5]. Public health initiatives suggest that sharing resources between municipalities is a plausible explanation for reduced social interactions in the second phase and the establishment of an intrinsic relationship. It has been found that in Beijing and Guangzhou, the highly high-risk zones of COVID-19 infection are likely to be in locations with higher population densities [114]. Similarly, research of several Italian areas found that regions with larger population densities have higher transmission rates [115]. This is because social distancing is more difficult in crowded or densely populated places. In addition, similar conclusions were revealed about the positive correlation between density and spreading rates, which were conducted in 20 Chinese provinces/municipalities [112]. Furthermore, there are several macro-economic benefits, such as job creation, energy security, and health. Future-proofed buildings have reduced lifetime costs and higher asset values from a business standpoint.
Nonetheless, without external nudges in legislative responsibilities or incentives, the real estate industry is hesitant to modify its ways and mobilize these little extra investments. The construction industry can provide a win-win situation by acting as a powerful weapon to stimulate the economy while also transitioning the entire industry to a new and greener form, as shown in Figure 12 [116]. Sustainable and green buildings can save a lot of money and reduce greenhouse gas emissions over time for minimal extra expenditure. According to the International Energy Agency (IEA), fulfilling the promise of sustainable construction by 2050 would save USD 1.1 trillion [116]. Instead, it must urgently alter the building sector’s trajectory to green or even zero-carbon structures.
In general, population mobility and transport systems that improve inter-and intra-urban connectedness are seen as essential elements in the transmission of infectious diseases. Earlier, the relationship between population mobility, transport systems, and the outbreak of some infectious diseases was established, as in the case of, e.g., Ebola [117]. By tracking the spread of the COVID-19 in all the several Italian regions, this was validated in a study that investigated the link between patterns of human movement and the spread of the virus. The daily frequency of validated cases of COVID-19 infection is closely related to journeys made 21 days ago. (This study suggests that in many countries imposing a 14-day quarantine based on health estimates of the incubation period may be inappropriate) [117]. Moreover, other modeling-based studies have highlighted the importance of the relationship between mobility patterns/restrictions and pandemic spread/containment [118]. Based on these findings, many municipal governments have imposed partial or complete restrictions on human movement to contain and prevent the spread of infection with the coronavirus [115,119]. Field statistics showed a noticeable decline in social activities due to the imposition of travel restrictions as a result of the outbreak of the COVID-19 epidemic. It was found that once limitations were imposed in the UK, daily journeys decreased by 80%. In other contexts, similar findings have been recorded [120]. For example, a 76% decrease was reported in the city of Santander, Spain [121]; it was also reported that the transportation demand more than halved in Budapest, Hungary [119]. Significant decreases of about 7% in shops and amusements, supermarkets, parks, pharmacies, transport stations, and workplaces have been shown in India [122].
Several studies have been conducted to determine the effectiveness of travel restrictions in stopping the virus from spreading. The findings suggest that human travel limitations have slowed the transmission of the virus in China [123,124] and the United Kingdom [120,125]. The first response of many countries/cities to the outbreak of COVID-19 was the reduction in flights to/from China, reducing the number of infections coming from China in February 2020 [125]. It was reported that COVID-19 spread rapidly throughout China and other countries of the world in a short period [118]. The outbreak occurred in the Chinese New Year, and Wuhan’s good rail connectivity was attributed to the amount of connecting flights. COVID-19 took longer to arrive in Chinese cities with fewer travelers from Wuhan, according to other researchers [124]. However, they stressed that restricting intra-city public transportation would simply lessen the frequency of events and that banning travel between cities and counties would be ineffective after the arrival of COVID-19. This emphasizes how important it is to act quickly [5].
It can be concluded that urban planning by allocating larger areas for open and agricultural regions and increasing the dimensions of the corridors to allow freedom of movement space, natural ventilation, and exposure to sunlight all contribute to disinfection and reduce the incidence of infection, as do modifying the specifications and requirements of materials used in construction to reduce adhesion or transmission of infection and providing modern means and internet applications to facilitate people’s lives and reduce movement and meetings.

6. Controls, Mitigations, and Health Care Setting Special Consideration

Filtration and ventilation are vital in minimizing SARS-CoV-2 transmission potential, although viruses can be found in aerosols of sizes that can penetrate high-efficiency filters [107] (see Figure 9a,b) [126]. Proper installations and maintenance of filters can minimize the airborne transmission risks. Higher air-exchange rates and outside air fractions in houses can assist in diluting the indoor pollutants from the air that is inhaled in the built environments [108,109]. This can be achieved by further ventilating the external air damper position on air-handling units, therefore draining greater ratios of any airborne viral particles present and indoor air. It is stated that poor interior air quality is characteristically caused by sources that release particles, viruses, gases, and diseases into the air. Insufficient ventilation is widely regarded as the single most prevalent cause of pollution buildup (Figure 13a) [126], as it can enhance indoor levels of pollution by failing to bring in enough outdoor air to dilute emissions from inside sources and failing to remove indoor air pollutants to the outside. High temperatures and humidity levels can also raise pollution concentrations. Inadequate filtering is the second most common source of pollution accumulation (Figure 13b) [126]. Notwithstanding fundamental advances in air filter technologies, a great many buildings continue to rely on ineffective filters or are neglectful in the maintenance of acceptable filters.
Relative to these modified building operation parameters, there are some cautions to consider [52]. First, improving external air factions can come with a raised consumption of energy. This is a valuable mitigation method for supporting human health in the short term. After the risk period has passed, construction workers are advised to return to ordinary ratios. Secondly, not all air-handling models have the capacity to significantly increase external air ratios. Those air-handling systems that have the capacities may need more regular filter-maintenance protocols. Thirdly, increasing airflow rates that just improve the recirculated indoor air delivery might possibly raise the transmission possibility. Moreover, the spatial configuration of buildings can discourage or encourage social interaction [127]. Western societies in recent years have appreciated designs that focus on feelings of “spaciousness” indoors, whether in workplaces or homes, via the application of open-area ideas that connect open-office ideas that deliberately direct inhabitants to chance encounter nodes and are thought to improve innovations and collaborations among workers. Spatial configurations can unintentionally improve transmission opportunities of viruses via designed human interactions.
Hospitals have constrained alternatives for social-distancing controls to prevent virus spread [128]. Moreover, health care and hospital facilities are usually buildings of patients with massively different necessities from the built environments adjacent to them. For instance, people with underlying conditions are usually put within protective environment (PE) spaces, positively pressured to reduce external airborne communicable microbes from accessing the room [129]. Nevertheless, these pressurization differentials also increase the probability that infectious agents in the patient rooms will migrate into the spaces of the higher traffic corridors when the doors are open, involuntarily exposing visitors, health care workers, and other patients.
Airborne infection isolations (AII) rooms, in comparison, use negative pressure differential comparative to neighboring rooms and corridor spaces, directly draining building air to the room exteriors [130]. The same negative pressure may compulsorily expose the building dwellers to airborne microbes from the corridor-space occupants. Airborne infection isolation rooms and protective environments can be designed with anterooms that are utilized as extra buffers between protected spaces and common areas to offer locations for health care practitioners to use and eliminate PPE and prevent virus spread. Nevertheless, an anteroom is not needed for airborne infection isolation rooms and protective environments and exists in certain buildings. Anterooms use extra floor areas, thus increasing the visual barriers among medical care teams and patients and increasing costs. In future operational protocols and designs, these trade-offs might be proposed given the critical roles of health care settings and the high costs of the epidemic during this time.
It can be concluded that ventilation is necessary to purify the air by developing the means to eliminate infection through filters or rays. In addition, ventilation and air purification are among the most important factors that limit the spread of infection. It requires reducing air pollution and the surrounding environment, in addition to increasing environmental awareness and paying attention to public health.

7. Architectural and Design Engineering for the Controls in Post-Pandemic

Health-associated infections highlight the need for more excellent knowledge of how the built environment influences infection transmission. Furthermore, we must recognize what design, structural, and operational improvements in the built environment can be made for better infection prevention and control. Figure 14 shows a multidisciplinary framework for mitigating the urban and social impacts of the measures of COVID-19 [131].

7.1. Future Human-Centered Design

To prevent sick building syndrome, chronic diseases, and allergies, architectural engineering should seek natural ventilation and avoid relying on artificial environmental conditions and mechanical ventilation. In the future built environment, more human-centered designs are required in architecture and urban design.
Thus, preparing a long-term design plan to avoid disease outbreaks in the future is very important to protect the population from infectious diseases [82]. Focusing on the human-centered approach can save energy in this case to achieve sustainability and a healthy environment. In addition, future designs for low-income communities must include cost-effective and health-secure alternatives [132]. The distribution of air pollutants around buildings can be redesigned using a building morphology and a passive urban approach contingent on an analysis of detailed local climate and site factors. In addition, inside the building, passive design principles allow natural ventilation and air distribution [133]. However, it is advised that areas with high levels of pollution adopt adequate disinfection and purifying processes [134].
Buildings need a comprehensive IAQ management plan that incorporates an optimal temperature and controls humidity regulation, ventilation, and air filtration for future human-centered designs. These are regarded as critical techniques for improving IAQ and protecting citizens from diseases spread by the air [133]. This strategy should also include the selection of building materials that are safe for human health, especially the respiratory system, in the long term, and the effective regular operation and maintenance of ventilation and air conditioning systems to ensure air purification. To avoid cross-contamination, internal filters must be disposed of as medical waste during air purifier maintenance. As a result, alternative biofiltration technologies are currently in the works [134]. In terms of temperature regulation, most climates may reduce or remove automated temperature management by incorporating a temperature control approach into the architectural design process of buildings [78,135].
The majority of the hospitals spaces and wards are not integrally designed with infectious diseases in mind. During both disease outbreaks and routine conditions, renewed considerations should be given to general building designs to meet different specifications for diverse operational requirements and patient needs. Separating the thermal space conditioning means from ventilation provisions is one such consideration and is an approach that can also promote improved energy efficiencies. Moreover, future designs need to review the best ways of triaging and completing original examinations of patients that present symptoms associated with infectious diseases to reduce exposures to spaces with other types of patients. The healthcare administrators, building operators, designers, and architects in future planning must aspire to building designs that can reduce the flow and connection between common areas and accommodate periods of improved social distancing, while also affording efficient space-use flexibility during ordinary working conditions.

7.2. In Post-COVID-19 Architectural Design: An Auxiliary Decision-Making Strategy

The present pandemic has strengthened modeling skills, and architects are being sought to aid in research using digital simulation techniques to analyze the dynamics of COVID-19 particles [136]. Architects must comprehend the possible threats in and around a building at the scale of a building. Recently, the researchers’ understanding has steadily increased through computer applications (CAD) to simulate air dispersal as well as natural ventilation. Furthermore, the advancement of computational fluid dynamics (CFD) and building information modeling (BIM) has made airflow modeling tools more accessible to architects. CFD models are commonly used by mechanical engineers to depict how air travels across space and the efficacy of ventilation systems. These techniques have now been repurposed for a better understanding of how infections spread through structures [133]. The architectural design process is considerably advanced by cooperation between the engineering staff of architects and mechanical engineers and by using CFD models. These technologies can provide researchers with predictive models and help them fill the information gap about airborne viral transmissions in built settings and the efficiency of artificial ventilation systems, leading to a more resilient architecture [137,138].
Future designers and architects should also gain a better understanding of modeling applications. Modeling applications use various digital technologies for analysis, simulation, and evaluation of the characteristics that help ventilation work well, to alleviate the airborne spread of viruses [133]. In short, the COVID-19 pandemic has been a considerable shock; on the other hand, the good news is that it has highlighted the importance of social science. The designers and architects collaborate to produce novel concepts for the community’s amenities.

8. Proposed Roles by Real Estate to Mitigate Transmission of COVID-19

It is found that with the outbreak of the COVID-19 pandemic, the relationship between human health and the built and ocean environment is becoming more apparent. While it takes a lot to know about this virus, there are several urgent precautions that real estate professionals may take to limit their chance of infection.

8.1. Purification of Indoor Air and Accentuating Ventilation of Buildings

Modifications to air purification procedures may take longer to implement; this strategy is worth noting since it can assist architects, engineers, and property managers in better planning for the future. Filtration of recirculated air, according to research, may be useful in preventing the transmission of airborne infectious diseases. The HEPA system can remove up to 99.97% of particles with a size of 0.3 μm and larger when operating at total capacity. These filters effectively trap viral particles dispersed by droplet nuclei, as well as dust, vapors, germs, and fungus [139]. According to research, the use of the HEPA system to recycle air reduces the particulate concentration in indoor air just as much as using a full outside air system under certain situations [140]. It is reported that ventilation rates significantly influence the droplet nuclei concentration decay [70]. With the concentration decay equation, it is reported that with 12ACH 1200 s is needed to reduce concentrations to 1.80%. On the other hand [70], with 24ACH, it requires only 600 s. Moreover, it is reported that since recycled air has become a significant part of the modern building system [86], providing fresh air to the population is critical to preventing airborne infectious diseases. In contrast, buildings without HVAC systems adopt another alternative to relying on natural ventilation by allowing the entry of natural air [141].

8.2. Airborne Dissemination

Pathogens spread via the air via droplets and aerosols produced by coughing, sneezing, screaming, breathing, toilet flushing, some surgical treatments, music, and speaking [142]. Most larger released droplets are gravitationally pulled to surfaces within 1–2 m of the source [143,144]. Short-range transmission is unaffected by general dilution ventilating or pressure differentials. Airflow patterns in an area in general, and airflow patterns around the origin in particular, might influence the spread of smaller infectious aerosols, particularly droplet nuclei caused by desiccation [145].
Small aerosols with 10 µm are especially important because they can remain for long periods in the air and have the potential to transmit infection (lasting up to several days in some cases). In addition, their micro size allows them to travel great distances, exposing unaware people with the original infection host [143]. Droplet-borne infectious diseases have much higher rates of transmission when healthy people are close to infected people, within 1–2 m of each other The surrounding environment conditions have an essential role in reducing the size and number of droplets through evaporation before they stick to surfaces with a diameter of 100 μm and converting them to aerosols of about 10 μm [146]. Droplet nucleation is used to describe droplet moisture loss due to evaporation and its transformation into an aerosol [147]. While ventilators cannot stop the quick settling of big droplets, they directly affect the spread of infectious disease droplet nuclei. Clean flow patterns can be induced into and transported by infective aerosols, to be trapped or expelled by directed airflow patterns [143].

8.3. Preserving Optimal Humidity and Emphasizing Cleaning Protocols

Viruses appear to do better in low-humidity environments, according to the evidence. Therefore, buildings can enhance humidity by installing new portable humidifiers throughout the facility to maintain an appropriate range of 40 to 60% [148]. Another viable option is to adjust cleaning processes to match the situation’s needs and increase the frequency of cleaning, restock cleaning supplies in advance, and keep hand soap, paper towels, hand sanitizer, and tissues on hand in the bathrooms [149].
It can be concluded that there is a need for complete coordination between all engineering disciplines to reach healthy and safe urban designs, facilities, buildings, etc. This is done by using simulation programs to match all engineering disciplines and their needs to reach a safe and healthy built environment.

9. Conclusions

This critical review study explored the contemporary and historical evidence reinforcing the impacts of major design approaches such as sunlight and natural ventilation in reducing infection threats in building environments. Moreover, the study discovered the relationship between architectural space and contagious infections and recommended design strategies for the prevention and control of diseases. This review study depended on the comprehensive existing literature in public health, architecture, and environmental science.
In the prevention and control of infections, design approaches can play great roles. It has become essential that multidisciplinary approaches be adopted in the present efforts to curb the COVID-19 outbreak. Based on the major discoveries of this value study, it is recommended that engineers and architects directly engaged in constructing or designing hospitals need to be given a training form in public health. This is because structures designed with less or more sunlight access might play major roles in impacting the indoor dust viral communities. Architects and engineers have to stand up and be counted in curbing the COVID-19 spread. Natural ventilation and improved filtration efficiency creates a healthy indoor environment. This can be accomplished at the early design stage, specification writing, and construction. Sunlight needs to be incorporated into lighting designs in healthcare settings, because it will remove the artificial lighting need and help inhibit viral and bacterial infections and consequently lead to ecological sustainability and result in energy conservation. Only a small proportion of ultraviolet C reaches planet earth even though it is the most effective infection control wavelength. The implications are that more sunlight is required indoors, in hospitals, and in schools. Moreover, this study recommends the utilization of unique UV radiation systems (UVC chambers and lamps), particularly in hospitals and healthcare settings in which daylight cannot be assured. In conclusion, the present COVID-19 epidemic—without a doubt—has changed our viewpoints regarding hospital architectural design, planning, and digital modeling as a biomedical system to prevent the spread of COVID-19.
Furthermore, based on the major finding of this review study, several hotspot points have been suggested as valuable opportunities to guide future research, as follows:
Expand the literature review to include additional factors and new elements to support the comprehensiveness of the building design framework.
Extend the literature to include all data on different types of buildings and ventilation systems.
Future studies may focus on developing design principles using simulation models to reach more accurate results.
Study the different ventilation and air conditioning systems and their ability to reduce the spread of transmitted epidemics.
Focus on the most efficient and sustainable health engineering design systems for buildings and facilities.

Author Contributions

Conceptualization M.A. (Mugahed Amran), N.M. and R.F.; and methodology, M.A. (Mugahed Amran), N.M., R.F. and A.B.; analyses, M.A. (Mugahed Amran), N.M., R.F., A.B., M.A. (Mujahid Ali) and A.M.Z.; writing—original draft, M.A. (Mugahed Amran), N.M., R.F. and A.M.Z.; review and editing, M.A. (Mugahed Amran), N.M., R.F., A.B., M.A. (Mujahid Ali) and A.M.Z.; supervision, M.A. (Mugahed Amran), N.M., R.F. and A.B.; funding acquisition M.A. (Mugahed Amran), R.F. and A.B. All authors have read and agreed to the published version of the manuscript.

Funding

The research is partially funded by the Ministry of Science and Higher Education of the Russian Federation as part of the World-class Research Center program: Advanced Digital Technologies (contract No. 075-15-2020-934 dated 17 November 2020).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data sharing is not applicable.

Acknowledgments

The authors gratefully acknowledge the financial support by the Deanship of Scientific Research at Prince Sattam bin Abdulaziz University, Alkharj, Saudi Arabia and the assistance of the Department of Civil Engineering Technology, Faculty of Industrial Technology, Phranakhon Rajabhat University, Thailand, and the Department of Civil Engineering, Faculty of Engineering and IT, Amran University, Yemen, for this study.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Przybylowski, A.; Stelmak, S.; Suchanek, M. Mobility Behaviour in View of the Impact of the COVID-19 Pandemic—Public Transport Users in Gdansk Case Study. Sustainability 2021, 13, 364. [Google Scholar] [CrossRef]
  2. Yen, M.-Y.; Schwartz, J.; King, C.-C.; Lee, C.-M.; Hsueh, P.-R. Recommendations for protecting against and mitigating the COVID-19 pandemic in long-term care facilities. J. Microbiol. Immunol. Infect. 2020, 53, 447–453. [Google Scholar] [CrossRef]
  3. Pinheiro, M.D.; Luís, N.C. COVID-19 Could Leverage a Sustainable Built Environment. Sustainability 2020, 12, 5863. [Google Scholar] [CrossRef]
  4. Li, B.; Peng, Y.; He, H.; Wang, M.; Feng, T. Built environment and early infection of COVID-19 in urban districts: A case study of Huangzhou. Sustain. Cities Soc. 2020, 66, 102685. [Google Scholar] [CrossRef] [PubMed]
  5. Sharifi, A.; Khavarian-Garmsir, A.R. The COVID-19 pandemic: Impacts on cities and major lessons for urban planning, design, and management. Sci. Total Environ. 2020, 749, 142391. [Google Scholar] [CrossRef]
  6. Kim, J.-J.; Rigdon, B. Sustainable Architecture Module: Introduction to Sustainable Design; National Pollution Prevention Center for Higher Education: Ann Arbor, MI, USA, 1998. [Google Scholar]
  7. Fediuk, R.S.; Yevdokimova, Y.G.; Smoliakov, A.K.; Stoyushko, N.Y.; Lesovik, V.S. Use of geonics scientific positions for designing of building composites for protective (fortification) structures. IOP Conf. Ser. Mater. Sci. Eng. 2017, 221, 012011. [Google Scholar] [CrossRef]
  8. Fediuk, R.S.; Lesovik, V.S.; Mochalov, A.V.; Otsokov, K.A.; Lashina, I.V.; Timokhin, R.A. Timokhin, Composite binders for concrete of protective structures. Mag. Civ. Eng. 2018, 6, 208–218. [Google Scholar] [CrossRef]
  9. Van Khai, T. Adaptive Architecture and the Prevention of Infections in Hospitals. Civ. Eng. Ser. 2016, 16, 2016–2028. [Google Scholar] [CrossRef]
  10. WHO. Infection Prevention and Control; World Health Organization: Geneva, Switzerland, 2020. [Google Scholar]
  11. Mauri, M. The future of the hospital and the structures of the NHS. TECHNE0-J. Technol. Arch. Environ. 2015, 9, 27–34. [Google Scholar] [CrossRef]
  12. Alcorn, K. Tugela Ferry XDR-TB out Break Continues to Grow, but Treatment in KZN Provides Hope. Available online: https://www.aidsmap.com/news/nov-2007/tugela-ferry-xdr-tb-outbreak-continues-grow-treatment-kzn-provides-hope (accessed on 12 September 2020).
  13. Chisci, E.; Masciello, F.; Michelagnoli, S. The Italian USL Toscana Centro model of a vascular hub responding to the COVID-19 emergency. J. Vasc. Surg. 2020, 72, 8–11. [Google Scholar] [CrossRef]
  14. Smolova, M.; Smolova, D. Emergency architecture. Modular construction of healthcare facilities as a response to pandemic outbreak. In E3S Web of Conferences, Proceedings of the 2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE-2021), Kazan, Russia, 21–28 April 2021; Vdovin, E., Ed.; EDP Sciences: Les Ulis, France, 2021; Volume 274, p. 01013. [Google Scholar] [CrossRef]
  15. Romani, G.; Mas, F.D.; Massaro, M.; Cobianchi, L.; Modenese, M.; Barcellini, A.; Ricciardi, W.; Barach, P.; Lucà, R.; Ferrara, M. Population Health Strategies to Support Hospital and Intensive Care Unit Resiliency During the COVID-19 Pandemic: The Italian Experience. Popul. Health Manag. 2021, 24, 174–181. [Google Scholar] [CrossRef] [PubMed]
  16. Ali, M.; de Azevedo, A.; Marvila, M.; Khan, M.; Memon, A.; Masood, F.; Almahbashi, N.; Shad, M.; Khan, M.; Fediuk, R.; et al. The Influence of COVID-19-Induced Daily Activities on Health Parameters—A Case Study in Malaysia. Sustainability 2021, 13, 7465. [Google Scholar] [CrossRef]
  17. Lateef, F. Hospital design for better infection control. J. Emergencies Trauma Shock 2009, 2, 175–179. [Google Scholar] [CrossRef] [PubMed]
  18. Brown, O.D.R.; Hennecke, R.P.; Nottebrock, D. Vancouver Convention Health Centre (COVID-19 Response): Planning, implementation, and four lessons learned. Am. J. Disaster Med. 2020, 15, 143–148. [Google Scholar] [CrossRef] [PubMed]
  19. Marinelli, M. Emergency Healthcare Facilities: Managing Design in a Post Covid-19 World. IEEE Eng. Manag. Rev. 2020, 48, 65–71. [Google Scholar] [CrossRef]
  20. A Volodchenko, A.; Lesovik, V.S.; A Cherepanova, I.; Zagorodnjuk, L.H.; Elistratkin, M.Y.; Volodchenko, A.N. Peculiarities of non-autoclaved lime wall materials production using clays. IOP Conf. Ser. Mater. Sci. Eng. 2018, 327, 022021. [Google Scholar] [CrossRef]
  21. Chernysheva, N.; Lesovik, V.; Fediuk, R.; Vatin, N. Improvement of Performances of the Gypsum-Cement Fiber Reinforced Composite (GCFRC). Materials 2020, 13, 3847. [Google Scholar] [CrossRef]
  22. Wu, X.; Lu, Y.; Zhou, S.; Chen, L.; Xu, B. Impact of climate change on human infectious diseases: Empirical evidence and human adaptation. Environ. Int. 2016, 86, 14–23. [Google Scholar] [CrossRef]
  23. Marlene, C. Infectious Diseases Likes It Hot: How Climate Change Helps Cholera and Salmonella. Available online: https://www.nationalnursesunited.org/news/infectious-diseases-it-hot-how-climate-change-helps-cholera-and-salmonella-outbreaks (accessed on 17 September 2021).
  24. de Neufville, R.; Lee, Y.S.; Scholtes, S. Flexibility in Hospital Infrastructure Design. In Proceedings of the 2008 First International Conference on Infrastructure Systems and Services: Building Networks for a Brighter Future (INFRA), Rotterdam, The Netherlands, 10–12 November 2008. [Google Scholar]
  25. Filippini, T.; Rothman, K.J.; Goffi, A.; Ferrari, F.; Maffeis, G.; Orsini, N.; Vinceti, M. Satellite-detected tropospheric nitrogen dioxide and spread of SARS-CoV-2 infection in Northern Italy. Sci. Total Environ. 2020, 739, 140278. [Google Scholar] [CrossRef]
  26. WHO/Europe. WHO Guidelines for Indoor Air Quality: Selected Pollutants; World Health Organization Regional Office for Europe: Copenhagen, Denmark, 2010. [Google Scholar]
  27. Wang, Z.; Zhang, J.S. Characterization and performance evaluation of a full-scale activated carbon-based dynamic botanical air filtration system for improving indoor air quality. Build. Environ. 2011, 46, 758–768. [Google Scholar] [CrossRef]
  28. Chan, I.Y.; Liu, A.M. Effects of neighborhood building density, height, greenspace, and cleanliness on indoor environment and health of building occupants. Build. Environ. 2018, 145, 213–222. [Google Scholar] [CrossRef] [PubMed]
  29. Van Den Berg, A.E.; Maas, J.; Verheij, R.A.; Groenewegen, P.P. Green space as a buffer between stressful life events and health. Soc. Sci. Med. 2010, 70, 1203–1210. [Google Scholar] [CrossRef] [PubMed]
  30. CDC. Coronavirus Disease 2019; Centers for Disease Control and Prevention: Atlanta, GA, USA, 2019. [Google Scholar]
  31. Fediuk, R.S.; Ibragimov, R.A.; Lesovik, V.S.; Pak, A.A.; Krylov, V.V.; Poleschuk, M.M.; Stoyushko, N.Y.; Gladkova, N.A. Processing equipment for grinding of building powders. IOP Conf. Ser. Mater. Sci. Eng. 2018, 327, 042029. [Google Scholar] [CrossRef]
  32. Elistratkin, M.Y.; Lesovik, V.S.; Zagorodnjuk, L.H.; Pospelova, E.A.; Shatalova, S.V. New point of view on materials development. IOP Conf. Ser. Mater. Sci. Eng. 2018, 327, 032020. [Google Scholar] [CrossRef]
  33. Buffoli, M.; Nachiero, D.; Capolongo, S. Flexible healthcare structures: Analysis and evaluation of possible strategies and technologies. Ann Ig. 2012, 24, 543–552. [Google Scholar] [PubMed]
  34. Sicignano, E.; Petti, L.; Di Ruocco, G.; Scarpitta, N. A model flexible design for pediatric hospital. Lect. Notes Civ. Eng. 2018, 3, 1464–1472. [Google Scholar] [CrossRef]
  35. Capolongo, S.; Gola, M.; Brambilla, A.; Morganti, A.; Mosca, E.I.; Barach, P. COVID-19 and Healthcare Facilities: A Decalogue of Design Strategies for Resilient Hospitals. Acta Bio Med. Atenei Parm. 2020, 91, 50–60. [Google Scholar] [CrossRef]
  36. Askar, R.; Bragança, L.; Gervásio, H. Adaptability of Buildings: A Critical Review on the Concept Evolution. Appl. Sci. 2021, 11, 4483. [Google Scholar] [CrossRef]
  37. Brambilla, A.; Sun, T.-Z.; Elshazly, W.; Ghazy, A.; Barach, P.; Lindahl, G.; Capolongo, S. Flexibility during the COVID-19 Pandemic Response: Healthcare Facility Assessment Tools for Resilient Evaluation. Int. J. Environ. Res. Public Health 2021, 18, 11478. [Google Scholar] [CrossRef]
  38. Logan, C.; Willis, J.; Willis, C.L. International Travel as Medical Research: Architecture and the Modern Hospital. Health Hist. 2010, 12, 116–133. [Google Scholar] [CrossRef]
  39. Guenther, R.; Vittori, G. Sustainable Healthcare Architecture; John Wiley and Sons: Hoboken, NJ, USA, 2008. [Google Scholar]
  40. Tesler, N. Evolution of medical architecture. MATEC Web Conf. 2018, 170, 03015. [Google Scholar] [CrossRef]
  41. Retief, F.; Cilliers, L. The evolution of hospitals from antiquity to the Renaissance. Acta Theol. 2010, 26, 213–232. [Google Scholar] [CrossRef]
  42. Burpee, H. History of Health Architecture. Integrated Design Lab Puget Sound. 2008. Available online: http://www.mahlum.com/pdf/HistoryofHealthcareArchBurpee.pdf (accessed on 19 September 2021).
  43. Costeira, E.M.A. Hospital Architecture: History, Evolution and New Visions. Sustinere 2014, 2, 57–64. [Google Scholar]
  44. Gormley, T. History of Hospitals and Ward. Health Des. 2010, 10, 50–54. [Google Scholar]
  45. Berche, P. Louis Pasteur, from crystals of life to vaccination. Clin. Microbiol. Infect. 2012, 18, 1–6. [Google Scholar] [CrossRef]
  46. Max, E. The modern Hospital in Historical Context. In Proceedings of the 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Minneapolis, MN, USA, 3–6 September 2009. [Google Scholar]
  47. Currie, J. The Fourth Factor: A History Perspective on Architecture and Medicine; AIA Press: Washington, DC, USA, 2007. [Google Scholar]
  48. Lednicky, J.A.; Lauzardo, M.; Fan, Z.H.; Jutla, A.; Tilly, T.B.; Gangwar, M.; Usmani, M.; Shankar, S.N.; Mohamed, K.; Eiguren-Fernandez, A.; et al. Viable SARS-CoV-2 in the air of a hospital room with COVID-19 patients. Int. J. Infect. Dis. 2020, 100, 476–482. [Google Scholar] [CrossRef]
  49. La Rosa, G.; Fratini, M.; Libera, S.D.; Iaconelli, M.; Muscillo, M. Viral Infections acquired Indoors through Airborne, Droplet or Contact Transmission. Ann. Ist. Super. Sanita. 2013, 49, 124–132. [Google Scholar] [CrossRef]
  50. Verreault, D.; Moineau, S.; Duchaine, C. Methods for Sampling of Airborne Viruses. Microbiol. Mol. Biol. Rev. 2008, 72, 413–444. [Google Scholar] [CrossRef]
  51. Barker, J.; Stevens, D.; Bloomfield, S. Spread and prevention of some common viral infections in community facilities and domestic homes. J. Appl. Microbiol. 2001, 91, 7–21. [Google Scholar] [CrossRef]
  52. Van Doremalen, N.; Bushmaker, T.; Morris, D.H.; Holbrook, M.G.; Gamble, A.; Williamson, B.N.; Tamin, A.; Harcourt, J.L.; Thornburg, N.J.; Gerber, S.I.; et al. Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1. N. Engl. J. Med. 2020, 382, 1564–1567. [Google Scholar] [CrossRef]
  53. Gleick, P. Dirty Water: Estimatined Death from Water Related Diseases 2000–2020; Pacific Institute for Studies in Development, Environment and Security: Oakland, CA, USA, 2002. [Google Scholar]
  54. Macy, T.; Quick, R.E. Transmission and Prevention of Water-Related Diseases; UNESCO-EOLSS Joint Committee: Paris, France, 2010. [Google Scholar]
  55. Moe, C.L. Waterborne Transmission of Infectious Agents. In Manual of Environmental Microbiology, 3rd ed.; American Society of Microbiology: Washington, DC, USA, 2007; pp. 222–248. [Google Scholar] [CrossRef]
  56. Melegaro, A.; Jit, M.; Gay, N.; Zagheni, E.; Edmunds, W.J. What types of contacts are important for the spread of infections? Using contact survey data to explore European mixing patterns. Epidemics 2011, 3, 143–151. [Google Scholar] [CrossRef] [PubMed]
  57. Lewis, D. COVID-19 rarely spreads through surfaces. So why are we still deep cleaning? Nature 2021, 590, 26–28. [Google Scholar] [CrossRef] [PubMed]
  58. Rahman, H.S.; Aziz, M.S.; Hussein, R.H.; Othman, H.H.; Omer, S.H.S.; Khalid, E.S.; Abdulrahman, N.A.; Amin, K.; Abdullah, R. The transmission modes and sources of COVID-19: A systematic review. Int. J. Surg. Open 2020, 26, 125–136. [Google Scholar] [CrossRef] [PubMed]
  59. Božič, A.; Kanduč, M. Relative humidity in droplet and airborne transmission of disease. J. Biol. Phys. 2021, 47, 1–29. [Google Scholar] [CrossRef]
  60. Emmanuel, U.; Osondu, E.D.; Kalu, K.C. Architectural design strategies for infection prevention and control (IPC) in health-care facilities: Towards curbing the spread of COVID-19. J. Environ. Health Sci. Eng. 2020, 18, 1699–1707. [Google Scholar] [CrossRef]
  61. Zhang, D.; Zhang, X.; Yang, Y.; Huang, X.; Jiang, J.; Li, M.; Ling, H.; Li, J.; Liu, Y.; Li, G.; et al. SARS-CoV-2 spillover into hospital outdoor environments. J. Hazard. Mater. Lett. 2021, 2, 100027. [Google Scholar] [CrossRef]
  62. Brady, M.T.; Evans, J.; Cuartas, J. Survival and disinfection of parainfluenza viruses on environmental surfaces. Am. J. Infect. Control 1990, 18, 18–23. [Google Scholar] [CrossRef]
  63. Weinstein, R.A.; Hota, B. Contamination, Disinfection, and Cross-Colonization: Are Hospital Surfaces Reservoirs for Nosocomial Infection? Clin. Infect. Dis. 2004, 39, 1182–1189. [Google Scholar] [CrossRef]
  64. Kuzyakov, Y.; Mason-Jones, K. Viruses in soil: Nano-scale undead drivers of microbial life, biogeochemical turnover and ecosystem functions. Soil Biol. Biochem. 2018, 127, 305–317. [Google Scholar] [CrossRef]
  65. Carthey, J. Reinterpreting the Hospital Corridor: “Wasted Space” or Essential for Quality Multidisciplinary Clinical Care? HERD Health Environ. Res. Des. J. 2008, 2, 17–29. [Google Scholar] [CrossRef]
  66. Chen, Y.; Lei, J.; Li, J.; Zhang, Z.; Yu, Z.; Du, C. Design characteristics on the indoor and outdoor air environments of the COVID-19 emergency hospital. J. Build. Eng. 2022, 45, 103246. [Google Scholar] [CrossRef]
  67. United Kingdom Department of Health (UKDH). Health Building Note 00-04-Circulation and Communication; UKDH: London, UK, 2013. [Google Scholar]
  68. Amran, M.; Murali, G.; Khalid, N.H.A.; Fediuk, R.; Ozbakkaloglu, T.; Lee, Y.H.; Haruna, S.; Lee, Y.Y. Slag uses in making an ecofriendly and sustainable concrete: A review. Constr. Build. Mater. 2021, 272, 121942. [Google Scholar] [CrossRef]
  69. Jiang, Y.; Zhao, B.; Li, X.; Yang, X.; Zhang, Z.; Zhang, Y. Investigating a safe ventilation rate for the prevention of indoor SARS transmission: An attempt based on a simulation approach. Build. Simul. 2009, 2, 281–289. [Google Scholar] [CrossRef]
  70. Qian, H.; Li, Y.; Seto, W.H.; Ching, P.; Ching, W.H.; Sun, H.Q. Natural Ventilation for reducing Airborne Infection in Hospital. Build. Environ. 2010, 45, 1651–1658. [Google Scholar] [CrossRef]
  71. Jiang, S.; Huang, L.; Chen, X.; Wang, J.; Wu, W.; Yin, S.; Chen, W.; Zhan, J.; Yan, L.; Ma, L.; et al. Ventilation of wards and Noscomial outbreak of severe acute respiratory Sydrome among health workers. Chin. Med. J. 2003, 116, 1293–1297. [Google Scholar]
  72. Ninomura, P.; Bartley, J. New Ventilation Guidelines for Health-Care Facilities. ASHRAE J. 2001, 43, 29–33. [Google Scholar]
  73. Lamberts, H. Space Standards and Dimensions of Patient Corridors. Health Facil. Guidel. 2015. Available online: https://healthfacilityguidelines.com/ViewPDF/ViewIndexPDF/iHFG_part_c_space_standards_dimensions (accessed on 21 September 2021).
  74. Shukman, D. Coronavirus: Can We Stay Safe as Lockdown Eases? BBC News. 2020. Available online: https://www.bbc.co.uk/news/science-environment-52804795 (accessed on 2 February 2022).
  75. Memarzadeh, F.; Olmsted, R.N.; Bartley, J.M. Applications of ultraviolet germicidal irradiation disinfection in health care facilities: Effective adjunct, but not stand-alone technology. Am. J. Infect. Control 2010, 38, S13–S24. [Google Scholar] [CrossRef] [PubMed]
  76. Rackes, A.; Waring, M.S. Using multiobjective optimizations to discover dynamic building ventilation strategies that can improve indoor air quality and reduce energy use. Energy Build. 2014, 75, 272–280. [Google Scholar] [CrossRef]
  77. Kaushik, M.; Guleria, N. The Impact of Pandemic COVID-19 in Workplace. Eur. J. Bus. Manag. 2020, 12, 9–18. [Google Scholar] [CrossRef]
  78. Cummings, B.E.; Waring, M.S. Potted plants do not improve indoor air quality: A review and analysis of reported VOC removal efficiencies. J. Expos. Sci. Environ. Epidemiol. 2020, 30, 253–261. [Google Scholar] [CrossRef]
  79. Packer, M. Algal capture of carbon dioxide; biomass generation as a tool for greenhouse gas mitigation with reference to New Zealand energy strategy and policy. Energy Policy 2009, 37, 3428–3437. [Google Scholar] [CrossRef]
  80. Chouirfa, H.; Bouloussa, H.; Migonney, V.; Falentin-Daudré, C. Review of titanium surface modification techniques and coatings for antibacterial applications. Acta Biomater. 2019, 83, 37–54. [Google Scholar] [CrossRef] [PubMed]
  81. Megahed, N.A. Photocatalytic technology in architectural context: From science to societal debates. Indoor Built Environ. 2013, 23, 603–614. [Google Scholar] [CrossRef]
  82. Bolashikov, Z.; Melikov, A.; Bolashikov, Z.; Melikov, A. Methods for air cleaning and protection of building occupants from airborne pathogens. Build. Environ. 2009, 44, 1378–1385. [Google Scholar] [CrossRef] [PubMed]
  83. Bradley, D. Shedding ultraviolet light on coronavirus. Mater. Today 2020, 37, 6–7. [Google Scholar] [CrossRef]
  84. Goel, S.; Hawi, S.; Goel, G.; Thakur, V.K.; Agrawal, A.; Hoskins, C.; Pearce, O.; Hussain, T.; Upadhyaya, H.M.; Cross, G.; et al. Resilient and agile engineering solutions to address societal challenges such as coronavirus pandemic. Mater. Today Chem. 2020, 17, 100300. [Google Scholar] [CrossRef]
  85. Baharuddin, B.; Adnan, H.; Mat Isa, N.; Mohamad Hasan, N.P.; Mat Sali, S.S. MENANGANI COVID-19: SUMBANGAN TEKNOLOGI NUKLEAR; i-Nuklear Bil 3/2020; Agensi Nuklear Malaysia: Kajang, Selangor, Malaysia, 2020. [Google Scholar]
  86. Atkinson, J.; Chartier, Y.; Lúcia Pessoa-Silva, C.; Jensen, P.; Li, Y.; Seto, W.-H. Natural Ventilation for Infection Control in Health-Care Settings; World Health Organization: Geneva, Switzerland, 2016. [Google Scholar]
  87. Nightingale, F. Notes on Hospitals; Longman, Robert & Green: London, UK, 1868. [Google Scholar]
  88. Solly, S. A Hand Book on Medical Climatology; Lea Brothers & Co: Philadelphia, PA, USA; New York, NY, USA, 1897. [Google Scholar]
  89. Hockberger, P. The damaging effects of sunlight on bacteria. J. Photochem. Photobiol. 2000, 58, 155–191. [Google Scholar] [CrossRef]
  90. The Building Research Establishment (BRE group). Daylight Benefit in Healthcare Buildings. 2020. Available online: https://www.designingbuildings.co.uk/wiki/Daylight_benefits_in_healthcare_buildings (accessed on 25 September 2021).
  91. Lytle, D.; Sagripanti, J.-L. Predicted Inactivation of Viruses of Relevance of Biodefence by Solar Radiation. J. Virol. 2005, 79, 14244–142252. [Google Scholar] [CrossRef]
  92. Rauth, A.M. The Physical State of Viral Nucleic Acid and the Sensitivity of Viruses to Ultraviolet Light. Biophys. J. 1965, 5, 257–273. [Google Scholar] [CrossRef]
  93. Seyer, A.; Sanlidag, T. Solar ultraviolet radiation sensitivity of SARS-CoV-2. Lancet Microbe 2020, 1, e8–e9. [Google Scholar] [CrossRef]
  94. Pozo-Antonio, J.S.; Sanmartín, P. Exposure to artificial daylight or UV irradiation (A, B or C) prior to chemical cleaning: An effective combination for removing phototrophs from granite. Biofouling 2018, 34, 851–869. [Google Scholar] [CrossRef] [PubMed]
  95. Kowalski, W. UVGI Disinfection Theory. In Ultraviolet Germicidal Irradiation Handbook; Springer: Berlin/Heidelberg, Germany, 2009; pp. 17–50. [Google Scholar] [CrossRef]
  96. Awada, M.; Becerik-Gerber, B.; Hoque, S.; O’Neill, Z.; Pedrielli, G.; Wen, J.; Wu, T. Ten questions concerning occupant health in buildings during normal operations and extreme events including the COVID-19 pandemic. Build. Environ. 2020, 188, 107480. [Google Scholar] [CrossRef]
  97. Tokazhanov, G.; Tleuken, A.; Guney, M.; Turkyilmaz, A.; Karaca, F. How is COVID-19 Experience Transforming Sustainability Requirements of Residential Buildings? A Review. Sustainability 2020, 12, 8732. [Google Scholar] [CrossRef]
  98. Alhusban, A.A.; Alhusban, S.A.; Alhusban, M.A. How the COVID-19 pandemic would change the future of architectural design. J. Eng. Des. Technol. 2021, 20, 339–357. [Google Scholar] [CrossRef]
  99. Agarwal, N.; Meena, C.S.; Raj, B.P.; Saini, L.; Kumar, A.; Gopalakrishnan, N.; Kumar, A.; Balam, N.B.; Alam, T.; Kapoor, N.R.; et al. Indoor air quality improvement in COVID-19 pandemic: Review. Sustain. Cities Soc. 2021, 70, 102942. [Google Scholar] [CrossRef] [PubMed]
  100. Zhang, N.; Wang, P.; Miao, T.; Chan, P.-T.; Jia, W.; Zhao, P.; Su, B.; Chen, X.; Li, Y. Real human surface touch behavior based quantitative analysis on infection spread via fomite route in an office. Build. Environ. 2021, 191, 107578. [Google Scholar] [CrossRef]
  101. Megahed, N.A.; Ghoneim, E.M. Antivirus-built environment: Lessons learned from Covid-19 pandemic. Sustain. Cities Soc. 2020, 61, 102350. [Google Scholar] [CrossRef]
  102. Navaratnam, L.; Nguyen, S.; Selvaranjan, K.; Zhang, K.; Mendis, G.; Aye, P. Designing Post COVID-19 Buildings: Approaches for Achieving Healthy Buildings. Buildings 2022, 12, 74. [Google Scholar] [CrossRef]
  103. Kaklauskas, A.; Lepkova, N.; Raslanas, S.; Vetloviene, I.; Milevicius, V.; Sepliakov, J. COVID-19 and Green Housing: A Review of Relevant Literature. Energies 2021, 14, 2072. [Google Scholar] [CrossRef]
  104. Kapoor, N.R.; Kumar, A.; Meena, C.S.; Kumar, A.; Alam, T.; Balam, N.B.; Ghosh, A. A Systematic Review on Indoor Environmental Quality in Naturally Ventilated School Classrooms: A Way Forward. Adv. Civ. Eng. 2021, 2021, 1–19. [Google Scholar] [CrossRef]
  105. Natural Ventilation for Infection Control in Health-Care Setting; World Health Organisation: Geneva, Switzerland, 2009.
  106. Hobday, R.; Dancer, S. Roles of sunlight and natural ventilation for controlling infection: Historical and current perspectives. J. Hosp. Infect. 2013, 84, 271–282. [Google Scholar] [CrossRef] [PubMed]
  107. Gould, I. Antibiotic resistance: The perfect storm. Int. J. Antimicrob. Agents 2009, 34, S2–S5. [Google Scholar] [CrossRef]
  108. Wallin, A.; Lukšienė, Ž.; Žagminas, K.; Šurkienė, G. Public Health and Bioterrorism: Renewed Threat of Anthrax and Smallpox. Medicina 2007, 43, 278–284. [Google Scholar] [CrossRef] [PubMed]
  109. Fleck, F. Conference warns of danger of re-emergence of smallpox as weapon of bioterror. Bull. World Health Organ. 2003, 81, 917. [Google Scholar]
  110. Hamidi, S.; Sabouri, S.; Ewing, R. Does Density Aggravate the COVID-19 Pandemic?: Early Findings and Lessons for Planners. J. Am. Plan. Assoc. 2020, 86, 495–509. [Google Scholar] [CrossRef]
  111. Boterman, W.R. Urban-Rural Polarisation in Times of the Corona Outbreak? The Early Demographic and Geographic Patterns of the SARS-CoV-2 Epidemic in the Netherlands. Tijdschr. Voor Econ. En Soc. Geogr. 2020, 111, 513–529. [Google Scholar] [CrossRef]
  112. Lin, C.; Lau, A.K.; Fung, J.C.; Guo, C.; Chan, J.W.; Yeung, D.W.; Zhang, Y.; Bo, Y.; Hossain, S.; Zeng, Y.; et al. A mechanism-based parameterisation scheme to investigate the association between transmission rate of COVID-19 and meteorological factors on plains in China. Sci. Total Environ. 2020, 737, 140348. [Google Scholar] [CrossRef]
  113. Qiu, Y.; Chen, X.; Shi, W. Impacts of social and economic factors on the transmission of coronavirus disease 2019 (COVID-19) in China. J. Popul. Econ. 2020, 33, 1127–1172. [Google Scholar] [CrossRef]
  114. Ren, H.; Zhao, L.; Zhang, A.; Song, L.; Liao, Y.; Lu, W.; Cui, C. Early forecasting of the potential risk zones of COVID-19 in China's megacities. Sci. Total Environ. 2020, 729, 138995. [Google Scholar] [CrossRef]
  115. Cartenì, A.; Di Francesco, L.; Martino, M. How mobility habits influenced the spread of the COVID-19 pandemic: Results from the Italian case study. Sci. Total Environ. 2020, 741, 140489. [Google Scholar] [CrossRef]
  116. Hageneder, C.; Zinecker, A. Green Construction vs. the Economic Crisis after COVID-19, iD4D-Sustainable Development News. 2020. Available online: https://ideas4development.org/en/green-building-economic-crisis-after-covid-19/ (accessed on 27 September 2021).
  117. Connolly, C.; Keil, R.; Ali, S.H. Extended urbanisation and the spatialities of infectious disease: Demographic change, infrastructure and governance. Urban Stud. 2020, 58, 245–263. [Google Scholar] [CrossRef]
  118. Wu, J.T.; Leung, K.; Leung, G.M. Nowcasting and forecasting the potential domestic and international spread of the 2019-nCoV outbreak originating in Wuhan, China: A modelling study. Lancet 2020, 395, 689–697. [Google Scholar] [CrossRef]
  119. Bucsky, P. Modal share changes due to COVID-19: The case of Budapest. Transp. Res. Interdiscip. Perspect. 2020, 8, 100141. [Google Scholar] [CrossRef] [PubMed]
  120. Hadjidemetriou, G.M.; Sasidharan, M.; Kouyialis, G.; Parlikad, A.K. The impact of government measures and human mobility trend on COVID-19 related deaths in the UK. Transp. Res. Interdiscip. Perspect. 2020, 6, 100167. [Google Scholar] [CrossRef]
  121. Aloi, A.; Alonso, B.; Benavente, J.; Cordera, R.; Echániz, E.; González, F.; Ladisa, C.; Lezama-Romanelli, R.; López-Parra, Á.; Mazzei, V.; et al. Effects of the COVID-19 Lockdown on Urban Mobility: Empirical Evidence from the City of Santander (Spain). Sustainability 2020, 12, 3870. [Google Scholar] [CrossRef]
  122. Saha, J.; Barman, B.; Chouhan, P. Lockdown for COVID-19 and its impact on community mobility in India: An analysis of the COVID-19 Community Mobility Reports, 2020. Child. Youth Serv. Rev. 2020, 116, 105160. [Google Scholar] [CrossRef] [PubMed]
  123. Kraemer, M.U.G.; Yang, C.-H.; Gutierrez, B.; Wu, C.-H.; Klein, B.; Pigott, D.M.; Open COVID-19 Data Working Group; du Plessis, L.; Faria, N.R.; Li, R.; et al. The effect of human mobility and control measures on the COVID-19 epidemic in China. Science 2020, 368, 493–497. [Google Scholar] [CrossRef]
  124. Tian, H.; Liu, Y.; Li, Y.; Wu, C.-H.; Chen, B.; Kraemer, M.U.G.; Li, B.; Cai, J.; Xu, B.; Yang, Q.; et al. An investigation of transmission control measures during the first 50 days of the COVID-19 epidemic in China. Science 2020, 368, 638–642. [Google Scholar] [CrossRef]
  125. Zhang, Y.; Zhang, A.; Wang, J. Exploring the roles of high-speed train, air and coach services in the spread of COVID-19 in China. Transp. Policy 2020, 94, 34–42. [Google Scholar] [CrossRef]
  126. Kubba, S. Chapter Seven–Indoor Environmental Quality. In LEED v4 Practices, Certification, and Accreditation Handbook, 2nd ed.; Butterworth-Heinemann: Oxford, UK, 2016; pp. 303–378. [Google Scholar] [CrossRef]
  127. Elistratkin, M.; Minakov, S.; Shatalova, S. Composite binding mineral additive influence on the plasticizer efficiency. Constr. Mater. Prod. 2019, 2, 10–16. [Google Scholar] [CrossRef]
  128. Evelson, L.; Lukuttsova, N. Application of statistical and multi fractalmodels for parameters optimization of nano-modified concrete. Int. J. Appl. Eng. Res. 2015, 10, 12363–12370. [Google Scholar]
  129. Rucka, M.; Wojtczak, E.; Knak, M.; Kurpińska, M. Characterization of fracture process in polyolefin fibre-reinforced concrete using ultrasonic waves and digital image correlation. Constr. Build. Mater. 2021, 280, 122522. [Google Scholar] [CrossRef]
  130. Leventsov, V.; Gluhov, V.; Leventcov, A. Investment attractiveness of the telecommunications economic sector during the coronavirus pandemic. In Internet of Things, Smart Spaces, and Next Generation Networks and Systems; Springer: Cham, Germany, 2020; pp. 285–296. [Google Scholar]
  131. Salama, A.M. Coronavirus questions that will not go away: Interrogating urban and socio-spatial implications of COVID-19 measures. Emerald Open Res. 2020, 2, 14. [Google Scholar] [CrossRef]
  132. Rassia, S.T. How Architecture Fails in Conditions of Crisis: A Discussion on the Value of Interior Design over the COVID-19 Outbreak. Oper. Res. Forum 2020, 1, 1–3. [Google Scholar] [CrossRef]
  133. Brittain, O.S.; Wood, H.; Kumar, P. Prioritising Indoor Air Quality in Building Design Can Mitigate Future Airborne Viral Outbreaks. Cities Health. Available online: https://www.tandfonline.com/doi/full/10.1080/23748834.2020 (accessed on 28 September 2021). [CrossRef]
  134. Zhao, B.; Liu, Y.; Chen, C. Air purifiers: A supplementary measure to remove airborne SARS-CoV-2. Build. Environ. 2020, 177, 106918. [Google Scholar] [CrossRef]
  135. Yu, C.W.F.; Kim, J.T. Building Environmental Assessment Schemes for Rating of IAQ in Sustainable Buildings. Indoor Built Environ. 2011, 20, 5–15. [Google Scholar] [CrossRef]
  136. Megahed, N.A.; Ghoneim, E.M. Indoor Air Quality: Rethinking rules of building design strategies in post-pandemic architecture. Environ. Res. 2020, 193, 110471. [Google Scholar] [CrossRef]
  137. Hassan, A.M.; El Mokadem, A.A.F.; Megahed, N.A.; Eleinen, O.M.A. Improving outdoor air quality based on building morphology: Numerical investigation. Front. Arch. Res. 2020, 9, 319–334. [Google Scholar] [CrossRef]
  138. Hassan, A.M.; Elmokadem, A.A.; Megahed, N.A.; Eleinen, O.M.A. Urban morphology as a passive strategy in promoting outdoor air quality. J. Build. Eng. 2020, 29, 101204. [Google Scholar] [CrossRef]
  139. Mangili, A.; Gendreau, M.A. Transmission of infectious diseases during commercial air travel. Lancet 2005, 365, 989–996. [Google Scholar] [CrossRef]
  140. Aliabadi, A.A.; Rogak, S.N.; Bartlett, K.H.; Green, S.I. Preventing Airborne Disease Transmission: Review of Methods for Ventilation Design in Health Care Facilities. Adv. Prev. Med. 2011, 2011, 1–21. [Google Scholar] [CrossRef]
  141. Smieszek, T.; Lazzari, G.; Salathé, M. Assessing the Dynamics and Control of Droplet- and Aerosol-Transmitted Influenza Using an Indoor Positioning System. Sci. Rep. 2019, 9, 1–10. [Google Scholar] [CrossRef] [PubMed]
  142. Bischoff, W.E.; Swett, K.; Leng, I.; Peters, T.R. Exposure to Influenza Virus Aerosols During Routine Patient Care. J. Infect. Dis. 2013, 207, 1037–1046. [Google Scholar] [CrossRef]
  143. ASHRAE. ASHRAE Position Document on Infectious Aerosols; ASHRAE: Atlanta, GA, USA, 2020. [Google Scholar]
  144. Baron, P. Generation and Behavior of Airborne Particles (Aerosols); Centers for Disease Control and Prevention: Atlanta, GA, USA, 2020. [Google Scholar]
  145. Yan, J.; Grantham, M.; Pantelic, J.; de Mesquita, P.J.B.; Albert, B.; Liu, F.; Ehrman, S.; Milton, D.K.; Adamson, W.; Beato-Arribas, B.; et al. Infectious virus in exhaled breath of symptomatic seasonal influenza cases from a college community. Proc. Natl. Acad. Sci. USA 2018, 115, 1081–1086. [Google Scholar] [CrossRef] [PubMed]
  146. Li, Y. The secret behind the mask. Indoor Air 2011, 21, 89–91. [Google Scholar] [CrossRef]
  147. Siegel, J.D.; Rhinehart, E.; Jackson, M.; Chiarello, L.; the Healthcare Infection Control Practices Advisory Committee. 2007 Guideline for Isolation Precautions: Preventing Transmission of Infectious Agents in Healthcare Settings; Centers for Disease Control and Prevention: Atlanta, GA, USA, 2007. [Google Scholar]
  148. Reiman, J.M.; Das, B.; Sindberg, G.M.; Urban, M.D.; Hammerlund, M.E.M.; Lee, H.B.; Spring, K.M.; Lyman-Gingerich, J.; Generous, A.R.; Koep, T.H.; et al. Humidity as a non-pharmaceutical intervention for influenza A. PLoS ONE 2018, 13, e0204337. [Google Scholar] [CrossRef]
  149. Tuladhar, E.; Hazeleger, W.C.; Koopmans, M.; Zwietering, M.H.; Beumer, R.R.; Duizer, E. Residual Viral and Bacterial Contamination of Surfaces after Cleaning and Disinfection. Appl. Environ. Microbiol. 2012, 78, 7769–7775. [Google Scholar] [CrossRef]
Figure 1. Impacts of COVID-19 on municipalities.
Figure 1. Impacts of COVID-19 on municipalities.
Buildings 12 00582 g001
Figure 2. The tangled links between environmental health and projected human health consequences.
Figure 2. The tangled links between environmental health and projected human health consequences.
Buildings 12 00582 g002
Figure 3. A graphic diagram of patient air sampler and bed locations in the same medication room (adapted from [48]).
Figure 3. A graphic diagram of patient air sampler and bed locations in the same medication room (adapted from [48]).
Buildings 12 00582 g003
Figure 4. Airborne and droplet spread of respiratory droplets.
Figure 4. Airborne and droplet spread of respiratory droplets.
Buildings 12 00582 g004
Figure 5. Illustration of the transmission of respiratory disease infection through contact with surfaces or contractions [59].
Figure 5. Illustration of the transmission of respiratory disease infection through contact with surfaces or contractions [59].
Buildings 12 00582 g005
Figure 6. SARS-CoV-2 spillover and possible transmission in high-risk zones of hospital exterior environs (Adapted from [61]).
Figure 6. SARS-CoV-2 spillover and possible transmission in high-risk zones of hospital exterior environs (Adapted from [61]).
Buildings 12 00582 g006
Figure 7. The 3-zone and 4-corridor design arrangement of nursing venues (Adapted from [66]).
Figure 7. The 3-zone and 4-corridor design arrangement of nursing venues (Adapted from [66]).
Buildings 12 00582 g007
Figure 8. Minimum recommended clearance of patient corridor design (Adapted from [73]).
Figure 8. Minimum recommended clearance of patient corridor design (Adapted from [73]).
Buildings 12 00582 g008
Figure 9. Computer simulation at Oregon University displaying the possible spread of COVID-19 in a restaurant with an air recirculation system (Adapted from [74]).
Figure 9. Computer simulation at Oregon University displaying the possible spread of COVID-19 in a restaurant with an air recirculation system (Adapted from [74]).
Buildings 12 00582 g009
Figure 10. Natural ventilation and daylight for patient rooms: (a) a single-side corridor (rectangular design form of patient room) and (b) an inner corridor (circle design form of patient room) (adapted from [86]).
Figure 10. Natural ventilation and daylight for patient rooms: (a) a single-side corridor (rectangular design form of patient room) and (b) an inner corridor (circle design form of patient room) (adapted from [86]).
Buildings 12 00582 g010
Figure 11. Post-COVID architectural design controls to decrease the COVID-19 disease transmission (Adapted from [102]).
Figure 11. Post-COVID architectural design controls to decrease the COVID-19 disease transmission (Adapted from [102]).
Buildings 12 00582 g011
Figure 12. The future strategy of sustainable building construction as a response to the post-COVID-19 crisis (Adapted from [116]).
Figure 12. The future strategy of sustainable building construction as a response to the post-COVID-19 crisis (Adapted from [116]).
Buildings 12 00582 g012
Figure 13. Rate of architectural design efficiency of the indoor environmental quality: (a) insufficient ventilation and (b) ineffective filtration (data adapted from [126]).
Figure 13. Rate of architectural design efficiency of the indoor environmental quality: (a) insufficient ventilation and (b) ineffective filtration (data adapted from [126]).
Buildings 12 00582 g013
Figure 14. A multidisciplinary framework for mitigating the urban and social impacts of the measures of COVID-19 (Adapted from [131]).
Figure 14. A multidisciplinary framework for mitigating the urban and social impacts of the measures of COVID-19 (Adapted from [131]).
Buildings 12 00582 g014
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Amran, M.; Makul, N.; Fediuk, R.; Borovkov, A.; Ali, M.; Zeyad, A.M. RETRACTED: A Review on Building Design as a Biomedical System for Preventing COVID-19 Pandemic. Buildings 2022, 12, 582. https://doi.org/10.3390/buildings12050582

AMA Style

Amran M, Makul N, Fediuk R, Borovkov A, Ali M, Zeyad AM. RETRACTED: A Review on Building Design as a Biomedical System for Preventing COVID-19 Pandemic. Buildings. 2022; 12(5):582. https://doi.org/10.3390/buildings12050582

Chicago/Turabian Style

Amran, Mugahed, Natt Makul, Roman Fediuk, Aleksey Borovkov, Mujahid Ali, and Abdullah M. Zeyad. 2022. "RETRACTED: A Review on Building Design as a Biomedical System for Preventing COVID-19 Pandemic" Buildings 12, no. 5: 582. https://doi.org/10.3390/buildings12050582

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop