Article Versions Notes

Monkova K, Monka PP, Sekerakova A, Tkac J, Bednarik M, Kovac J, Jahnatek A. Research on Chip Shear Angle and Built-Up Edge of Slow-Rate Machining EN C45 and EN 16MnCr5 Steels. Metals. 2019; 9(9):956. https://doi.org/10.3390/met9090956

Monkova, Katarina, Peter Pavol Monka, Adriana Sekerakova, Jozef Tkac, Martin Bednarik, Juraj Kovac, and Andrej Jahnatek. 2019. "Research on Chip Shear Angle and Built-Up Edge of Slow-Rate Machining EN C45 and EN 16MnCr5 Steels" Metals 9, no. 9: 956. https://doi.org/10.3390/met9090956

Monkova, K., Monka, P. P., Sekerakova, A., Tkac, J., Bednarik, M., Kovac, J., & Jahnatek, A. (2019). Research on Chip Shear Angle and Built-Up Edge of Slow-Rate Machining EN C45 and EN 16MnCr5 Steels. Metals, 9(9), 956. https://doi.org/10.3390/met9090956