Next Article in Journal
Quantitative Microstructure of Multiphase Al-Zn-Si-(Mg) Coatings and Their Effects on Sacrificial Protection for Steel
Next Article in Special Issue
Constitutive Model for Hot Deformation Behavior of Fe-Mn-Cr-Based Alloys: Physical Model, ANN Model, Model Optimization, Parameter Evaluation and Calibration
Previous Article in Journal
Effects of Composition on Melt Fillability and Impact Resistance of TiAl Alloys for Thin-Blade Turbine Wheels: Laboratory Predictions and Product Verification
Previous Article in Special Issue
Formability Assessment Based on Q-Value for Optimizing the Deep Drawing Process of Automotive Parts Made from Aluminum Alloys Sheet
 
 
Article

Article Versions Notes

Metals 2025, 15(5), 475; https://doi.org/10.3390/met15050475
Action Date Notes Link
article xml file uploaded 23 April 2025 05:26 CEST Original file -
article xml uploaded. 23 April 2025 05:26 CEST Update https://www.mdpi.com/2075-4701/15/5/475/xml
article pdf uploaded. 23 April 2025 05:26 CEST Version of Record https://www.mdpi.com/2075-4701/15/5/475/pdf
article html file updated 23 April 2025 05:28 CEST Original file -
article html file updated 25 June 2025 01:23 CEST Update https://www.mdpi.com/2075-4701/15/5/475/html
Back to TopTop