Next Article in Journal
A Numerical-Experimental Study on Orthogonal Cutting of AISI 1045 Steel and Ti6Al4V Alloy: SPH and FEM Modeling with Newly Identified Friction Coefficients
Next Article in Special Issue
Analysis of Fatigue Strength of L-PBF AlSi10Mg with Different Surface Post-Processes: Effect of Residual Stresses
Previous Article in Journal
Monitoring and Analysis of Dynamic Response for Open-Pit Mine with Inside Inclined Shafts under Train Loading
Previous Article in Special Issue
Effect of As-Built and Ground Surfaces on the Fatigue Properties of AlSi10Mg Alloy Produced by Additive Manufacturing
 
 
Article

Article Versions Notes

Metals 2021, 11(11), 1682; https://doi.org/10.3390/met11111682
Action Date Notes Link
article pdf uploaded. 22 October 2021 09:56 CEST Version of Record https://www.mdpi.com/2075-4701/11/11/1682/pdf-vor
article xml file uploaded 29 October 2021 10:33 CEST Original file -
article xml uploaded. 29 October 2021 10:33 CEST Update https://www.mdpi.com/2075-4701/11/11/1682/xml
article pdf uploaded. 29 October 2021 10:33 CEST Updated version of record https://www.mdpi.com/2075-4701/11/11/1682/pdf
article html file updated 29 October 2021 10:35 CEST Original file -
article html file updated 30 July 2022 12:25 CEST Update https://www.mdpi.com/2075-4701/11/11/1682/html
Back to TopTop