Skip to Content
LubricantsLubricants
  • Article
  • Open Access

30 April 2024

12 Pages

Effect of Wear on Alternating Bending Fatigue Life of 20CrNi2Mo Martensitic Steel

,
,
and
1
School of Electronic and Information Engineering, Anshun University, Anshun 561000, China
2
Guizhou Provincial University Integrated Key Tackling Platform, Anshun University, Anshun 561000, China
3
College of Mechanical Engineering, Guizhou University, Guiyang 550025, China
4
Guizhou Anji Aviation Precision Casting Co., Ltd., Anshun 561000, China
This article belongs to the Special Issue Friction and Wear of Alloys

Abstract

Bending fatigue failures are commonly related to the wear behavior in an active system. The surface wear and plastic deformation of the tribolayer play crucial roles in the wear–bending fatigue behaviors of steels. In particular, the lamellar structure of martensitic steel leads to its unique wear–bending fatigue behavior. In this work, the wear–bending fatigue testing method and device were introduced to explore the wear–bending fatigue behavior of the martensitic steel. The effect of wear on the alternating bending fatigue life of 20CrNi2Mo martensitic steel was studied under low and high fatigue stress. The influence of wear debris on the fatigue life at two different sliding speeds was also analyzed. The results show that the fatigue life decreased with the wear load increased under high bending stress. Moreover, for systems with nanoscale wear debris on the steel surface, the wear–bending fatigue lifetimes are significantly enhanced compared with large wear debris.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.