Multiphase Computational Fluid Dynamics of Rotary Shaft Seals

The primary task of rotary shaft seals is to prevent an unwanted fluid transfer between two areas. In shaft passages of gearboxes, for example, rotary shaft seals avoid the leakage of transmission oil to ambient air. This means the flow in the lubricant film in the sealing gap between the sealing edge and the shaft surface consists of at least two phases. Taking the phenomenon of cavitation into account, the flow consists of three phases. This study aims to provide an in-depth understanding of the multiphase flow in the lubricant film of rotary shaft seals. As experimental studies of the flow processes on a microscale have proven to be quite difficult, a simulation-based approach is applied. Computational fluid dynamics (CFD) serves to compute the transient multiphase flows in the lubricant film in the sealing gap. The computational domain is a three-dimensional microscale model of the lubricant film. The results show the transient hydrodynamic pressure buildup and the dynamic phase interactions during operation. This study provides far-reaching insights into the multiphase flow processes in the lubricant film in the sealing gap and simulation-based evidence of the lubrication and sealing mechanism of rotary shaft seals.