Next Article in Journal
Theoretical and Simulation Analysis on Fabrication of Micro-Textured Surface under Intermittent Cutting Condition by One-Dimensional Ultrasonic Vibration-Assisted Turning
Next Article in Special Issue
Analysis of the Influence of Component Type and Operating Condition on the Selection of Preventive Maintenance Strategy in Multistage Industrial Machines: A Case Study
Previous Article in Journal
Temperature Control for Automated Tape Laying with Infrared Heaters Based on Reinforcement Learning
Previous Article in Special Issue
Dynamic Analysis of a High-Contact-Ratio Spur Gear System with Localized Spalling and Experimental Validation
 
 
Article

Article Versions Notes

Machines 2022, 10(3), 165; https://doi.org/10.3390/machines10030165
Action Date Notes Link
article xml file uploaded 22 February 2022 14:35 CET Original file -
article xml uploaded. 22 February 2022 14:35 CET Update https://www.mdpi.com/2075-1702/10/3/165/xml
article pdf uploaded. 22 February 2022 14:35 CET Version of Record https://www.mdpi.com/2075-1702/10/3/165/pdf
article html file updated 22 February 2022 14:36 CET Original file -
article html file updated 1 August 2022 02:03 CEST Update https://www.mdpi.com/2075-1702/10/3/165/html
Back to TopTop