Skip to Content
You are currently on the new version of our website. Access the old version .
WaterWater
  • Article
  • Open Access

15 October 2025

21 Pages

Experimental Study on the Fracture and Failure of the Locking Section of Rock Slopes Caused by Freeze–Thaw of Fracture Water

,
,
,
,
,
and
1
College of Architecture and Civil Engineering, Huanghuai University, Zhumadian 463000, China
2
Henan Lanling Huanke Waterproof Materials Co., Ltd., Zhumadian 463000, China
3
College of Architecture and Civil Engineering, Xi’an University of Science and Technology, Xi’an 710054, China
4
School of Civil and Architecture Engineering, Xi’an Technological University, Xi’an 710054, China
This article belongs to the Special Issue Advances in Water Related Geotechnical Engineering

Abstract

In rock slopes with a three-section landslide, the locking section is the key control factor. This study conducted double-sided freeze–thaw tests on a scale model of a rock slope with a three-section landslide in a cold region. We monitored the changes in frost heave force, strain, and fracture during the water–ice phase change and investigated the effect of the trailing edge tensile crack length on the frost heave fracture of the locking section. A crack frost heave model was proposed based on rock and fracture mechanics to explore the mechanism of slope crack freeze–thaw weathering. According to the results, the slope shoulder froze first, with the freezing front progressing from the slope shoulder to the interior of the rock mass. The fracture failure in the three-section rock slopes was mostly caused by the frost heave of the trailing-edge tensile cracks. The largest frost heave force and locking section deformation occurred when the temperature of the top of the trailing edge tensile crack decreased from −3.5 °C to −6 °C (whereas that of the bottom of the crack dropped from 0 °C to −2.6 °C). Additionally, the results demonstrate that the frost heave force is positively correlated with the length of the trailing edge tension crack, and shear marks are virtually absent on the tensile fracture surface.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.