Next Article in Journal
A Theoretical Investigation of the Polyaddition of an AB2+A2+B4 Monomer Mixture
Next Article in Special Issue
Development and Validation of a 1D Dynamic Model of an Injection Moulding Process and Design of a Model-Based Nozzle Pressure Controller
Previous Article in Journal
Analysis of the Rotation Bending Test Method and Characterization of Unidirectional Carbon Fiber-Reinforced Polycarbonate Tapes at Processing Temperatures
Previous Article in Special Issue
Adhesion-Induced Demolding Forces of Hard Coated Microstructures Measured with a Novel Injection Molding Tool
 
 
Article

Article Versions Notes

Polymers 2024, 16(3), 424; https://doi.org/10.3390/polym16030424
Action Date Notes Link
article xml file uploaded 2 February 2024 17:24 CET Original file -
article xml uploaded. 2 February 2024 17:24 CET Update https://www.mdpi.com/2073-4360/16/3/424/xml
article pdf uploaded. 2 February 2024 17:24 CET Version of Record https://www.mdpi.com/2073-4360/16/3/424/pdf
article html file updated 2 February 2024 17:26 CET Original file https://www.mdpi.com/2073-4360/16/3/424/html
Back to TopTop