Next Article in Journal
Performance and Degradation of Nonwoven Mulches Made of Natural Fibres and PLA Polymer—Open Field Study
Next Article in Special Issue
Quality Analysis of Micro-Holes Made by Polymer Jetting Additive Manufacturing
Previous Article in Journal
Magnetic Resonance-Based Analytical Tools to Study Polyvinylpyrrolidone–Hydroxyapatite Composites
Previous Article in Special Issue
Mechanical and Wear Studies of Boron Nitride-Reinforced Polymer Composites Developed via 3D Printing Technology
 
 

Order Article Reprints

Journal: Polymers, 2023
Volume: 15
Number: 4446

Article: Additive Manufactured Parts Produced Using Selective Laser Sintering Technology: Comparison between Porosity of Pure and Blended Polymers
Authors: by Chiara Morano and Leonardo Pagnotta
Link: https://www.mdpi.com/2073-4360/15/22/4446

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop