Next Article in Journal
Some Mechanical Properties of Composite Materials with Chopped Wheat Straw Reinforcer and Hybrid Matrix
Next Article in Special Issue
Advances in Polyethylene Terephthalate Beverage Bottle Optimization: A Mini Review
Previous Article in Journal
Thermo-Responsive Polyion Complex of Polysulfobetaine and a Cationic Surfactant in Water
Previous Article in Special Issue
Acetylation Modification, Characterization, and Anticomplementary Activity of Polysaccharides from Rhododendron dauricum Leaves
 
 
Article
Peer-Review Record

Comparison and Optimization: Research on the Structure of the PET Bottle Bottom Based on the Finite Element Method

Polymers 2022, 14(15), 3174; https://doi.org/10.3390/polym14153174
by Shangjie Ge-Zhang 1, Mingbo Song 2, Zehang Huang 3, Maodan Li 4 and Liqiang Mu 2,*
Reviewer 1:
Reviewer 2:
Polymers 2022, 14(15), 3174; https://doi.org/10.3390/polym14153174
Submission received: 6 July 2022 / Revised: 28 July 2022 / Accepted: 28 July 2022 / Published: 3 August 2022
(This article belongs to the Special Issue Eco-Friendly Polymers: Synthesis, Characterization and Applications)

Round 1

Reviewer 1 Report

Dear Author(s),

The manuscript Polymers 2022 and titled “Comparison and Optimization: Research on the Structure of PET Bottle Bottom Based on Finite Element Method” was reviewed. It is a regular paper with an interesting subject with a FEM approach.

The research aim is to explain the effect of geometry of polyethylene terephthalate (PET) beverage bottles via finite element methods. Then, propose calculating technique could improve the design of PET bottles.  

Paper is well written and it was quite explained for reader stand points. Findings from the research were acceptably discussed considering the literature, and conclusion was consistent with generated data. 

It was evaluated that it is a regular paper and finding could attract readers especially practisinary, research engineers and persons in the state of the art. The manuscript can be accepted after some revisions.

1. Please provide some information on alternative failure criteria out of Von Mises related to polymer based materials.

2. Please provide some information on polymer structure related to creep and atmospheric conditions. 

3. If possible, please put some figures of fractured structure.

 

My best regards,

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Reviewer 2 Report

This article contains the results of a comparative analysis of the stress state in typical designs of the bottom of a plastic bottle. The authors present to the reader successful attempts to optimize the shape of the mentioned objects. The general idea, purpose and methods of the research are clear to me. I recommend publishing the paper as presented.

Author Response

We express our full gratitude and respect for your careful review and high evaluation of this article.

Back to TopTop