Next Article in Journal
Improving Quality of Work for Positive Health: Interaction of Sustainable Development Goal (SDG) 8 and SDG 3 from the Sustainable HRM Perspective
Previous Article in Journal
Determinants of Students’ Satisfaction with AI Tools in Education: A PLS-SEM-ANN Approach
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Substantiation of the Use of a Flexible Chain-Type Subsoiler for Improving the Agrotechnological Properties of Soil

by
Andriy Kondratiuk
1,
Egidijus Šarauskis
2,
Bohdan Sheludchenko
1,
Savelii Kukharets
1,2,*,
Algirdas Jasinskas
2,
Pavlo Zabrodskyi
1 and
Vladyslav Shubenko
1
1
Department of Mechanics and Agroecosystems Engineering, Polissia National University, Staryi Blvd 7, 10008 Zhytomyr, Ukraine
2
Department of Agricultural Engineering and Safety, Agriculture Academy, Vytautas Magnus University, Studentų Str. 15A, Akademija, LT-53362 Kaunas, Lithuania
*
Author to whom correspondence should be addressed.
Sustainability 2024, 16(13), 5355; https://doi.org/10.3390/su16135355
Submission received: 19 April 2024 / Revised: 18 June 2024 / Accepted: 19 June 2024 / Published: 24 June 2024
(This article belongs to the Special Issue Bioresource Technology and Energy Sustainable Development)

Abstract

Technogenic influence on agricultural soils leads to the transformation of their morphological features, significantly worsens their agrochemical, physical, mechanical and agrotechnological properties, prevents the optimal use of potential soil fertility and, as a result, leads to a decrease in crop yield. Mechanical soil decompaction when using various types of subsoilers, including the flexible chain-type working body (the chain), is used to prevent the negative consequences of technogenic influence. According to the results of the analytical calculations, the proportionality factor of the chain length, which determines the ratio of the width of the plow grip to the chain length of a flexible subsoiler, was established. The specified coefficient is proportional and equals 2.4. The use of the specified coefficient allows us, at the stage of the development of the design and technological documentation, to determine the main design parameter of the flexible subsoiler, which is the length of the used chain depending on the width of the plow grip. The surface of the field cultivated with the experimental tillage tool meets the requirements for sowing the agricultural crops without performing additional technological operations.
Keywords: soil; technogenic transformation; decompaction; flexible subsoiler; design parameter; chain; machine-tractor unit; plowing soil; technogenic transformation; decompaction; flexible subsoiler; design parameter; chain; machine-tractor unit; plowing

Share and Cite

MDPI and ACS Style

Kondratiuk, A.; Šarauskis, E.; Sheludchenko, B.; Kukharets, S.; Jasinskas, A.; Zabrodskyi, P.; Shubenko, V. Substantiation of the Use of a Flexible Chain-Type Subsoiler for Improving the Agrotechnological Properties of Soil. Sustainability 2024, 16, 5355. https://doi.org/10.3390/su16135355

AMA Style

Kondratiuk A, Šarauskis E, Sheludchenko B, Kukharets S, Jasinskas A, Zabrodskyi P, Shubenko V. Substantiation of the Use of a Flexible Chain-Type Subsoiler for Improving the Agrotechnological Properties of Soil. Sustainability. 2024; 16(13):5355. https://doi.org/10.3390/su16135355

Chicago/Turabian Style

Kondratiuk, Andriy, Egidijus Šarauskis, Bohdan Sheludchenko, Savelii Kukharets, Algirdas Jasinskas, Pavlo Zabrodskyi, and Vladyslav Shubenko. 2024. "Substantiation of the Use of a Flexible Chain-Type Subsoiler for Improving the Agrotechnological Properties of Soil" Sustainability 16, no. 13: 5355. https://doi.org/10.3390/su16135355

APA Style

Kondratiuk, A., Šarauskis, E., Sheludchenko, B., Kukharets, S., Jasinskas, A., Zabrodskyi, P., & Shubenko, V. (2024). Substantiation of the Use of a Flexible Chain-Type Subsoiler for Improving the Agrotechnological Properties of Soil. Sustainability, 16(13), 5355. https://doi.org/10.3390/su16135355

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop