Next Article in Journal
Assessment of Wood-Based Fly Ash as Alternative Cement Replacement
Next Article in Special Issue
A Review of Optimal Charging Strategy for Electric Vehicles under Dynamic Pricing Schemes in the Distribution Charging Network
Previous Article in Journal
Sustainability and the Expected Effects of Office-to-Residential Conversion in Historic Downtown Areas of South Korea
Previous Article in Special Issue
Maritime Cargo Prioritisation during a Prolonged Pandemic Lockdown Using an Integrated TOPSIS-Knapsack Technique: A Case Study on Small Island Developing States—The Rodrigues Island
Article

Assessing the Environmental and Economic Footprint of Electronic Toll Collection Lanes: A Simulation Study

1
Civil Engineer, School of Civil Engineering, Aristotle University of Thessaloniki, 541 24 Thessaloniki, Greece
2
Transport Engineering Laboratory, Department of Transport and Project Management, School of Civil Engineering, Aristotle University of Thessaloniki, 541 24 Thessaloniki, Greece
3
Laboratory of Transportation Planning, Transportation Engineering & Highway Engineering, Department of Transportation & Hydraulic Engineering, School of Rural & Surveying Engineering, Aristotle University of Thessaloniki, 541 24 Thessaloniki, Greece
*
Author to whom correspondence should be addressed.
Sustainability 2020, 12(22), 9578; https://doi.org/10.3390/su12229578
Received: 15 October 2020 / Revised: 5 November 2020 / Accepted: 12 November 2020 / Published: 17 November 2020
(This article belongs to the Special Issue Feature Papers in Sustainable Transportation Models and Applications)
Electronic toll collection (ETC) plays, as part of transport demand management (TDM) measures, an important role in preventing traffic congestion and improving the environmental conditions in urban and rural areas. An attempt is made in the framework of this paper to evaluate the overall performance of a toll station when a lane is dedicated to ETC. The case study refers to a toll station in the Thessaloniki Metropolitan Area, Greece. Scenarios considered specific traffic characteristics, variable toll booth setups, and different penetration rates of the ETC tag users for car and heavy vehicles. The tool used in the evaluation process was the PTV Vissim traffic simulation software. The operation of the toll station during a specific peak-hour period was simulated with the aid of the specific software. In total, 39 alternative scenarios were developed and compared to determine the level of penetration rate for which the ETC lane would be effective for different toll booth setups. Results showed that when the right lane of the toll station is converted to ETC lane, the penetration rate of this lane must be greater the 15% for the private vehicles and 20% for the heavy goods vehicles (HGV) to reduce traffic congestion and to improve environmental conditions. It was also found that when an additional ETC lane was introduced to the existing toll station set up, traffic congestion and the associated environmental conditions were much improved even for low penetration rates. It must be noticed that the results from the use of discounted cash flow methods like internal rate of return (IRR), net present value (NPV) and benefit–cost ratio (BCR) showed that all economic indicators converge as penetration rate increases in all toll booth setups. Therefore, there is a specific penetration rate threshold above which the economic viability of the investment is secured. These findings can assist the design of an effective policy in terms of the optimized operation of a toll station and sustainable mobility planning. View Full-Text
Keywords: electronic toll collection; transport demand management; traffic simulation; traffic congestion; environmental conditions; financial assessment; sustainable mobility electronic toll collection; transport demand management; traffic simulation; traffic congestion; environmental conditions; financial assessment; sustainable mobility
Show Figures

Figure 1

MDPI and ACS Style

Ramandanis, I.-D.; Politis, I.; Basbas, S. Assessing the Environmental and Economic Footprint of Electronic Toll Collection Lanes: A Simulation Study. Sustainability 2020, 12, 9578. https://doi.org/10.3390/su12229578

AMA Style

Ramandanis I-D, Politis I, Basbas S. Assessing the Environmental and Economic Footprint of Electronic Toll Collection Lanes: A Simulation Study. Sustainability. 2020; 12(22):9578. https://doi.org/10.3390/su12229578

Chicago/Turabian Style

Ramandanis, Ioannis-Dimosthenis, Ioannis Politis, and Socrates Basbas. 2020. "Assessing the Environmental and Economic Footprint of Electronic Toll Collection Lanes: A Simulation Study" Sustainability 12, no. 22: 9578. https://doi.org/10.3390/su12229578

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop