Next Article in Journal
In-Situ Growth of Carbon Nanotubes on MOF-Derived High-Entropy Alloys with Efficient Electromagnetic Wave Absorption
Next Article in Special Issue
Effect of Lap Joint Configuration and Seam Strategy in Green-Laser Welding on Multi-Layer Cu Foil Stacks to Lead-Tab Joints for Pouch Cell Application
Previous Article in Journal
Defect Analysis of Surface Cracks in Mn18Cr2 High-Manganese Wear-Resistant Steel Plate
Previous Article in Special Issue
Effect of Shielding Gas and Post-Welding Heat Treatment on the Mechanical and Corrosion Performances of Duplex and Super Duplex Stainless Steels’ Low Heat-Input Welded Joints
 
 

Order Article Reprints

Journal: Materials, 2026
Volume: 19
Number: 240

Article: Influence of Laser Cutting Parameters on the Microhardness, Roughness, and Microstructure of AISI 304, S355J2, and AlMg3 Alloys
Authors: by Jaroslaw Selech, Grzegorz Burzynski, Dessie Tibebe, Dariusz Ulbrich and Piotr Banas
Link: https://www.mdpi.com/1996-1944/19/2/240

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop