Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives

Antosik, Adrian Krzysztof; Mozelewska, Karolina; Musik, Marlena; Miądlicki, Piotr; Wilpiszewska, Katarzyna

doi:10.3390/ma16072879

Open AccessArticle

Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives

by

Adrian Krzysztof Antosik

^1,*

,

Karolina Mozelewska

¹

,

Marlena Musik

¹

,

Piotr Miądlicki

²

and

Katarzyna Wilpiszewska

¹

Department of Chemical Organic Technology and Polymeric Materials, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, 70-322 Szczecin, Poland

²

Engineering of Catalytic and Sorbent Materials Department, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, 70-322 Szczecin, Poland

^*

Author to whom correspondence should be addressed.

Materials 2023, 16(7), 2879; https://doi.org/10.3390/ma16072879

Submission received: 17 February 2023 / Revised: 2 April 2023 / Accepted: 3 April 2023 / Published: 4 April 2023

(This article belongs to the Special Issue Synthetic and Natural Origin Polymers: Synthesis, Characterization, Modification, Functionalized Properties and Applications)

Download

Browse Figures

Review Reports Versions Notes

Abstract

Obtaining new silicone self-adhesive in the presence of modified illite has been described. The filler was modified with N,N,4-trimethylaniline. The effect of illite content and modification on functional properties (adhesion, cohesion, stickiness, and shrinkage) was determined. Additionally, the thermal resistance (the SAFT test) of obtained silicone pressure-sensitive adhesives was evaluated. For all the systems tested, an increase in thermal resistance and shrinkage decrease were noted. Moreover, only a slight adhesion and tack decrease was revealed. Such self-adhesives could be applied for joining elements operating at increased temperatures, e.g., in heavy industry.

Keywords: amine modification; illite; silicone pressure-sensitive adhesive; self-adhesive properties; adhesion

Share and Cite

MDPI and ACS Style

Antosik, A.K.; Mozelewska, K.; Musik, M.; Miądlicki, P.; Wilpiszewska, K. Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives. Materials 2023, 16, 2879. https://doi.org/10.3390/ma16072879

AMA Style

Antosik AK, Mozelewska K, Musik M, Miądlicki P, Wilpiszewska K. Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives. Materials. 2023; 16(7):2879. https://doi.org/10.3390/ma16072879

Chicago/Turabian Style

Antosik, Adrian Krzysztof, Karolina Mozelewska, Marlena Musik, Piotr Miądlicki, and Katarzyna Wilpiszewska. 2023. "Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives" Materials 16, no. 7: 2879. https://doi.org/10.3390/ma16072879

APA Style

Antosik, A. K., Mozelewska, K., Musik, M., Miądlicki, P., & Wilpiszewska, K. (2023). Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives. Materials, 16(7), 2879. https://doi.org/10.3390/ma16072879

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives

Abstract

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI