Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy
Abstract
:1. Introduction
2. Materials and Methods
3. Results
4. Conclusions
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Conflicts of Interest
References
- Wilberforce, T.; Alaswad, A.; Baroutaji, A.; Abdelkareem, M.; Ramadan, M.; Olabi, A.; Sayed, E.; Elsaid, K.; Maghrabie, H. Future Directions for Shape Memory Alloy Development. In Encyclopedia of Smart Materials: Smart Biomaterials and Bioinspired Smart Materials and Systems; Elsevier: Amsterdam, The Netherlands, 2022; Volume 1, pp. 231–242. [Google Scholar] [CrossRef]
- Rodriguez, J.; Zhu, C.; Duoss, E.; Wilson, T.; Spadaccini, C.; Lewicki, J. Shape-morphing composites with designed micro-architectures. Sci. Rep. 2016, 6, 27933. [Google Scholar] [CrossRef]
- Dobrzański, L.; Dobrzański, L.; Dobrzańska-Danikiewicz, A.; Dobrzańska, J. Nitinol Type Alloys General Characteristics and Applications in Endodontics. Processes 2022, 10, 101. [Google Scholar] [CrossRef]
- Šimšić, Z.S.; Živković, D.; Manasijević, D.; Grgurić, T.H.; Du, Y.; Gojić, M.; Todorović, R. Thermal analysis and microstructural investigation of Cu-rich alloys in the Cu–Al–Ag system. J. Alloys Compd. 2014, 612, 486. [Google Scholar] [CrossRef]
- Šimšić, Z.S.; Manasijević, D.; Živković, D.; Grgurić, T.H.; Kostov, A.; Minić, D.; Živković, Ž. Experimental investigation and characterization of selected as-cast alloys in vertical Cu0.5Ag0.5–Al section in ternary Cu–Al–Ag system. J Therm Anal Calorim. 2015, 120, 149. [Google Scholar] [CrossRef]
- Huang, H.Y.; Zhu, Y.Z.; Chang, W.S. Comparison of Bending Fatigue of NiTi and CuAlMn Shape Memory Alloy Bars. Adv. Mater. Sci. Eng. 2020, 2020, 8024803. [Google Scholar] [CrossRef]
- Stošić, Z.; Manasijević, D.; Balanović, L.J.; Grgurić, T.H. Effects of Composition and Thermal Treatment of Cu-Al-Zn Alloys with Low Content of Al on their Shape-memory Properties. Mater. Res. 2017, 20, 1425. [Google Scholar] [CrossRef]
- Abolhasani, D.; Han, S.; VanTyne, C.; Kang, N.; Moon, Y. Enhancing the shape memory effect of Cu–Al–Ni alloys via partial reinforcement by alumina through selective laser melting. J. Mater. Res. Technol. 2021, 15, 4032–4047. [Google Scholar] [CrossRef]
- Alaneme, K.; Okotete, E. Reconciling viability and cost-effective shape memory alloy options—A review of copper and iron based shape memory metallic systems. Engineering Science And Technology. Int. J. Res. 2016, 19, 1582–1592. [Google Scholar] [CrossRef]
- Gustmann, T.; dos Santos, J.; Gargarella, P.; Kühn, U.; Van Humbeeck, J.; Pauly, S. Properties of Cu-Based Shape-Memory Alloys Prepared by Selective Laser Melting. Shape Mem. Superelast. 2016, 3, 24–36. [Google Scholar] [CrossRef]
- Ren, C.; Wang, Q.; Hou, J.; Zhang, Z.; Yang, H.; Zhang, Z. Exploring the strength and ductility improvement of Cu–Al alloys. Mater. Sci. Eng. A 2020, 786, 139441. [Google Scholar] [CrossRef]
- Konen, R.; Fintov, S. Copper and Copper Alloys: Casting, Classification and Characteristic Microstructures. In Copper Alloys—Early Applications and Current Performance—Enhancing Processes; IntechOpen: London, UK, 2012; pp. 3–30. [Google Scholar] [CrossRef]
- Van Humbeeck, J. High Temperature Shape Memory Alloys. J. Eng. Mater. Technol. 1999, 121, 98–101. [Google Scholar] [CrossRef]
- Najah Saud Al-Humairi, S. Cu-Based Shape Memory Alloys: Modified Structures and Their Related Properties. In Recent Advancements in the Metallurgical Engineering and Electrodeposition; IntechOpen: London, UK, 2020. [Google Scholar] [CrossRef]
- Carl, M.; Smith, J.; Van Doren, B.; Young, M. Effect of Ni-Content on the Transformation Temperatures in NiTi-20 at.% Zr High Temperature Shape Memory Alloys. Metals 2017, 7, 511. [Google Scholar] [CrossRef]
- Jain, A.; Hussain, S.; Kumar, P.; Pandey, A.; Dasgupta, R. Effect of Varying Al/Mn Ratio on Phase Transformation in Cu–Al–Mn Shape Memory Alloys. Trans. Indian Inst. 2015, 69, 1289–1295. [Google Scholar] [CrossRef]
- Mallik, U.; Sampath, V. Effect of composition and ageing on damping characteristics of Cu–Al–Mn shape memory alloys. Mater. Sci. Eng. A 2008, 478, 48–55. [Google Scholar] [CrossRef]
- Canbay, C.; Ozgen, S.; Genc, Z. Thermal and microstructural investigation of Cu–Al–Mn–Mg shape memory alloys. Appl. Phys. A 2014, 117, 767–771. [Google Scholar] [CrossRef]
- Kainuma, R.; Satoh, N.; Liu, X.; Ohnuma, I.; Ishida, K. Phase equilibria and Heusler phase stability in the Cu-rich portion of the Cu–Al–Mn system. J. Alloys Compd. 1998, 266, 191–200. [Google Scholar] [CrossRef]
- Suru, M.G.; Lohan, N.M.; Pricop, B.; Mihalache, M.; Mocanu, M.; Bujoreanu, L.G. Precipitation Effects on the Martensitic Transformation in a Cu-Al-Ni Shape Memory Alloy. J. Mater. Eng. Perform. 2016, 25, 1562. [Google Scholar] [CrossRef]
- Zárubová, N.; Novák, V. Phase stability of CuAlMn shape memory alloys. Mater. Sci. Eng. A 2004, 378, 216. [Google Scholar] [CrossRef]
- Qian, S.; Geng, Y.; Wang, Y.; Pillsbury, T.E.; Hada, Y.; Yamaguchi, Y.; Fujimoto, K.; Hwang, Y.; Radermacher, R.; Cui, J.; et al. Elastocaloric effect in CuAlZn and CuAlMn shape memory alloys under compression. Philos. Trans. Royal Soc. A 2016, 374, 20150309. [Google Scholar] [CrossRef] [PubMed]
- Sedmák, P.; Šittner, P.; Pilch, J.; Curfs, C. Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction. Acta Mater. 2015, 94, 257–270. [Google Scholar] [CrossRef]
- Yang, Q.; Wang, S.; Chen, J.; Zhou, T.; Peng, H.; Wen, Y. Strong heating rate-dependent deterioration of shape memory effect in up/step quenched Cu-based alloys: A ductile Cu Al Mn alloy as an example. Acta Mater. 2016, 111, 348–356. [Google Scholar] [CrossRef]
- Sutou, Y.; Omori, T.; Koeda, N.; Kainuma, R.; Ishida, K. Effects of grain size and texture on damping properties of Cu–Al–Mn-based shape memory alloys. Mater. Sci. Eng. A 2006, 438–440, 743–746. [Google Scholar] [CrossRef]
- Zhao, X.; Huang, H.; Wen, C.; Su, Y.; Qian, P. Accelerating the development of multi-component Cu-Al-based shape memory alloys with high elastocaloric property by machine learning. Comput. Mater. Sci. 2020, 176, 109521. [Google Scholar] [CrossRef]
- Yang, Q.; Yin, D.; Ge, J.; Chen, J.; Wang, S.; Peng, H.; Wen, Y. Suppressing heating rate-dependent martensitic stabilization in ductile Cu-Al-Mn shape memory alloys by Ni addition: An experimental and first-principles study. Mater. Charact. 2018, 145, 381–388. [Google Scholar] [CrossRef]
- Silva, R.A.G.; Adorno, A.T.; Carvalho, T.M.; Magdalena, A.G.; Santos, C.M.A. Precipitation Reaction in alpha-Cu-Al-Ag Alloys. Mater. Rev. 2012, 16, 747–753. [Google Scholar] [CrossRef]
- Silva, R.; Paganotti, A.; Gama, S.; Adorno, A.; Carvalho, T.; Santos, C. Investigation of thermal, mechanical and magnetic behaviors of the Cu-11%Al alloy with Ag and Mn additions. Mater. Charact. 2013, 75, 194–199. [Google Scholar] [CrossRef]
- Santos, C.; Adorno, A.; Paganotti, A.; Silva, C.; Oliveira, A.; Silva, R. Phase stability in the Cu-9 wt%Al-10 wt%Mn-3 wt%Ag alloy. J. Phys. Chem. Solids 2017, 104, 145–151. [Google Scholar] [CrossRef]
- Santos, C.M.A.; Adorno, A.T.; Stipcich, M.; Cuniberti, A.; Souza, J.S.; Bessa, C.V.X.; Silva, R.A.G. Effects of Ag Presence on Phases Separation and order-disorder Transitions in Cu-xAl-Mn Alloys. Mater. Chem. Phys. 2019, 227, 184–190. [Google Scholar] [CrossRef]
- Ivanić, I.; Kožuh, S.; Grgurić, T.H.; Vrsalović, L.; Gojić, M. The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy. Materials 2022, 15, 1825. [Google Scholar] [CrossRef]
- Ziółkowski, A. Pseudoelasticity of Shape Memory Alloys Theory and Experimental Studies; Butterworth-Heinemann: Oxford, UK, 2015. [Google Scholar]
- Gholami-Kermanshahi, M.; Wu, Y.Y.; Lange, G.; Chang, S.H. Effect of alloying elements (Nb, Ag) on the damping performance of Cu–Al–Mn shape memory alloys. J. Alloys Compd. 2023, 930, 167438. [Google Scholar] [CrossRef]
- Silva, R.A.G.; Gama, S.; Paganotti, A.; Adorno, A.T.; Carvalho, T.M.; Santos, C.M.A. Effect of Ag addition on phase transitions of the Cu–22.26 at.% Al–9.93 at.% Mn alloy. Thermochim. Acta 2013, 554, 71–75. [Google Scholar] [CrossRef]
Sample | Ms/°C (1st Cycle) | Mf/°C (1st Cycle) | Ms/°C (2nd Cycle) | Mf/°C (2nd Cycle) | ΔH (J/g) |
---|---|---|---|---|---|
as-cast Cu-9Al-7Mn-2Ag | 22 | −56 | 14 | −63 | 2.25 |
quenched Cu-9Al-7Mn-2Ag | 54 | −22 | 64 | −44 | 6.8 |
quenched Cu-9Al-16Mn-2Ag | 65 | 1 | 65 | −15 | 1.27 |
Hardness | HV | ||||||
---|---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | Average | ||
Cu9Al16Mn2Ag | As-cast state | 167.27 | 192.51 | 201.81 | 170.12 | 180.97 | 182.54 |
Quenched state | 244.93 | 235.50 | 237.01 | 238.24 | 241.69 | 239.47 | |
Cu9Al7Mn2Ag | As-cast state | 241.72 | 248.14 | 246.48 | 244.68 | 246.12 | 245.42 |
Quenched state | 241.72 | 248.14 | 238.52 | 243.67 | 239.84 | 242.38 |
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Liverić, L.; Holjevac Grgurić, T.; Mandić, V.; Chulist, R. Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy. Materials 2023, 16, 5782. https://doi.org/10.3390/ma16175782
Liverić L, Holjevac Grgurić T, Mandić V, Chulist R. Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy. Materials. 2023; 16(17):5782. https://doi.org/10.3390/ma16175782
Chicago/Turabian StyleLiverić, Lovro, Tamara Holjevac Grgurić, Vilko Mandić, and Robert Chulist. 2023. "Influence of Manganese Content on Martensitic Transformation of Cu-Al-Mn-Ag Alloy" Materials 16, no. 17: 5782. https://doi.org/10.3390/ma16175782